• Journal of the Korean Institute of Landscape Architecture
• /
• v.42 no.5
• /
• pp.88-100
• /
• 2014

The purpose of the study is to analyze the regional effectiveness of wall-plantings by applying a biotope area ratio when wall-plantings are constructed in high density areas. For this, this study required a sample of the wall-planting's regional plan. Therefore, types of wall-planting were determined and applied to a sample site. Four types of wall-plantings were developed by formative features and functional features. Type "A" had simple and functional features, Type "B" had both mixed and functional features, Type "C" had both simple and landscape features and Type "D" had mixed and landscape features. Jung-gu District in Seoul was chosen as the sample site. Total investigations were performed three times for three months from June to August, 2011. Total green-able walls were located in 498 places with a total length of 8,449m and gross vertical area of $23,754.90m^2$. The classification results of total green-able walls by the four types were Type "A" at $1,936.65m^2$, Type "B" at $5,875.30m^2$, Type "C" at $12,487.85m^2$ and Type "D" at $3,455.10m^2$. This study analyzed how all facade areas of the green-able walls impacted the biotope area ratio at the site. First, the biotope area ratio regarding all the zones in Jung-gu District was defined as the gross biotope area ratio while the biotope area ratio regarding all of the artificial zones was defined as the net biotope area ratio. In the case of the gross biotope area ratio, 17.97% is current ration with a projected increase to 0.10% after wall-planting. In the case of the net biotope area ratio, 4.73% is the current ration with a projected increase to 0.11% after wall-planting. This 0.11% is about 2.28% of 4.73%. This study looks at all wall-plantings that have been constructed throughout a high density area to observe their impact on the improvement of ecological function therein. With consideration of the landscape value of the facade, the regional effectiveness of wall-planting is expected to increase even more.

• Proceedings of the Korean Information Science Society Conference
• /
• 2010.06b
• /
• pp.289-293
• /
• 2010

21C 현대 문명사회에서는 도시의 고밀도 및 팽창으로 인하여 도시 내 생태계가 파괴되면서 생물서식처의 환경 악화 및 엄청난 감소가 초래되었으며, 그 결과로 인하여 인간과 생물이 접촉할 수 있는 공간이 현저하게 줄어들고 있다. 또한 도시 영역의 확장을 위하여 산림 및 녹지의 감소, 녹지의 분절 및 단절화, 해안 매립 등이 계획 없이 무분별하게 진행됨으로써, 각종 동식물의 개체 수 감소 및 토양의 건조화 등이 발생하고 있으며, 그 영향으로 생물종의 다양성이 떨어지고, 도시 생태계의 교란이 심해지고 있다. 이러한 도시 생태계의 교란은 도시에 거주하고 있는 시민들의 생활의 질이 떨어지게 하고 많은 환경 문제들의 주원인이 되고 있다. 지속적이면서도 자연친화적인 도시발전을 위해서는 도시 내 자연생태계를 회복하고 생물서식공간을 종합적으로 보전하면서 복원해야 한다는 요구가 높아지고 있지만, 이를 체계적으로 이루기 위한 방법론의 부재에 시달리고 있었다. 이러한 가운데 유럽을 중심으로 생겨난 비오톱(Biotope)과 비오톱 지도화 방법이 생태계를 보전하며, 시민들에게 다양한 자연체험과 휴양 기회를 제공하고 친환경적인 도시계획을 위한 핵심적인 역할을 하는 것으로 인식되고 있다. 하지만, 기존의 비오톱 지도는 이미지 기반의 2차원 지도로 제공되고 있어, 거리 및 공간 분석에 취약하고 정보전달력이 부족하여, 익숙한 전문가가 아닌 경우 비오톱을 이해하는데 상당한 정도의 시간이 필요하였다. 이에 본 논문에서는 공간정보가 결여된 2차원 형태의 GIS 데이터를 기반으로 3차원 공간 데이터를 자동으로 생성하고, 위성영상과 DEM(Digital Elevation Model)을 이용하여 3차원 지형을 만들어 각 주제도별로 입체적인 분석이 가능하도록 하였다. 또한 동영상 녹화 기능과 3차원 객체 추가 기능을 이용하여, 자연생태계를 고려한 도시의 설계를 진행하는 경우 3차원적인 모델링을 제공함으로써 효과적이면서도 사용자의 이해도를 향상 시킬 수 있는 정보 전달력을 가질 수 있도록 설계 및 구현하였다.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.37 no.1
• /
• pp.1-15
• /
• 2000

To reconstruct 3- D shape, It is a common strategy to acquire multiple range Images from different viewpoints and integrate them into a common coordinates In this paper, we particularly focus on the registration and integration processes for combining all range Images into one surface model. For the registration, we propose the 2-step registration algorithm, which consists of 2 steps the rough registration step using all data points and the fine registration step using the high-curved data points For the integration, we propose a new algorithm, referred to as ‘multi-registration’ technique, to alleviate the error accumulation problem, which occurs during applying the pair-wise registration to each range image sequentially, in order to transform them into a common reference frame Intensive experiments are performed on the various real range data In experiments, all range images were registered within 1 minutes on Pentium 150MHz PC The results show that the proposed algorithms registrate and integrate multiple range Images within a tolerable error bound in a reasonable computation time, and the total error between all range Images are equalized with our proposed algorithms.

• Journal of Broadcast Engineering
• /
• v.9 no.3
• /
• pp.236-245
• /
• 2004

A multiview sequence CODEC with view scaiability is proposed in this paper. We define a GGOP (Group of GOP) structure as a basic coding unit to efficiently code multiview sequences. 7he proposed CODEC provides flexible GGOP structures based on the number of views and baseline distances among cameras. Multiview sequences encode consists of disparity estimation/compensation, motion estimation/compensation, residual coding and rate control and generates multiview sequence bitstream. The main bitstream is the same as an MPEG-2 mono-sequence bitstream for MPEG-2 compatibility. The auxiliary bitstream contains information concerning the remaining multiview sequences except for the reference sequences. The proposed CODEC with view scalability provides that a number of view flints are selectively determined at the receiver according to the type of display modes. The proposed multiview sequence CODEC is tested with several multiview sequences to determine its flexibility. compatibility with MPEG-2 and view scaiability. In addition, we subjectively confirm that the decoded bitstreams with view scaiability can be Properly displayed by several types of display modes. including 3D monitors.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.4
• /
• pp.44-52
• /
• 2003

Shape memory alloys (SMA) are often used in smart structures as active components. Their ability to provide large recovery forces and displacements has been useful in many applications, including devices for artificial muscles, active structural acoustic control, and shape control. Based on the 3-dimensional SMA constitutive equation in this paper, the radial displacement control of externally pressurized circular and semicircular composite cylinders under external pressure with a thin SMA layer bonded on its inner surface or inserted between composite layers in investigated using 3-dimensional finite element analysis. Upon actuation through resistive heating, SMAs start to transform from martensitic into austenitic state, simultaneously recover the prestrain, and thus cause the composite cylinders to go back to their original shapes of the cylinder cross-sections.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.14 no.7
• /
• pp.871-877
• /
• 2004

In this paper, for manufacturing a custom-made shoes, shape of foot acquired three-dimensional measurement device which makes shoe-last data for needing a custom-made shoes is founded on artificial intelligence technique and it shows method restoring to the original shape in optimized state. the developed system for this study is based on PC which uses existing three dimensional measurement method. And it gains shoe-last and data of foot shape going through 8 CCD(Charge Coupled Device) Which equipped top and bottom, right and left sides and 4 lasers which also equipped both sides and upper and lower sides. The acquired data are processed image processing algorithm using artificial intelligence technique. And result of data management is better quality of removing noise than other system not using artificial intelligence technique and it can simplify post-processing. So, this paper is constituted hardware and software system and it used neural network for determining threshold value, when input image on pre-processing step is being stage of image binarization and present that results.

• The Journal of the Korea Contents Association
• /
• v.9 no.11
• /
• pp.18-26
• /
• 2009

Image resolution enhancement algorithm is a basic technique for image enlargement and restoration. The main problem is the image quality degradation such as blurring or blocking effects. In this paper, we propose loss information estimation and image resolution enhancement method using low level interpolation method. In the proposed method, loss information is computed by downsampling -interpolation process of obtained low resolution image. We estimate loss information of high resolution image using interpolation of the computed loss information. Lastly, we add up interpolated high resolution image and the estimated loss information which is applied a weight factor. Our experiments obtained the average PSNR 1.4dB which is improved results better than conventional algorithm. Also subjective image quality is more clearness and distinctness. The proposed method may be helpful for various video applications which required improvement of image.

• Korean journal of applied entomology
• /
• v.43 no.1
• /
• pp.7-14
• /
• 2004

This study was carried out to survey and confirm the occurring sites of Parnassius bremeri in Korea, and to investigate ecological characteristics to develop a mass rearing technique. In the field survey, adults were found in the two previously known sites in Gyungnam Province and another site was newly found in Samcheok, Gangwon Province. Emergence period of adults was from middle of May to middle of June. Oviposition took place on various material, including hostplant, debris, dead leaves, etc. Eggs were laid singly, up to 126.7 eggs per female. The egg-period was 221.3${\pm}$2.3 days, eggs were hatched from 11th to 22nd of January in the natural condition, and started to feed for about 10 days after hatching. Survival rate of the 1st larvae was 67.6%. Developing period of each instar in the insectary (25$^{\circ}C$, 75% RH, 16L:8D) was 11.2 days for the 1st instar, 7.3 days for 2nd, 12.8 days for 3rd, 16.2 days for 4th, and 18.2 days for 5th, and the pupal period was 21.3 days. The average longevity of adults was 26.2 days. Oviposition rate was higher in the natural condition with enough space to fly for 3♀ : 1 ♂ coupled, at least 3 ${\times}$ 3${\times}$4 m-sized room, than in smaller cage. In a comparison of the preference for visiting on sugar source, black sugar and fructose were effective.

• Journal of Plant Biotechnology
• /
• v.44 no.2
• /
• pp.171-177
• /
• 2017

A callus-mediated regeneration protocol for sea-milkwort, an endangered coastal plant species in South Korea, is reported here. The explants of in vitro-plantlets generated from a node culture revealed distinguishable responses in callus induction depending on genotype, explant source, light condition, and 2,4-D concentration. Especially, continuous darkness exclusively facilitated callus induction from explants prior to other treatments. The calli initiated on the media with 2,4-D ranging from 0.1 mg/L to 3.0 mg/L in the dark vigorously proliferated when subcultured on the same media in continuous darkness. Given 1.0 mg/L zeatin in addition to darkness to the calli of the 'Pistachio' genotype, normal adventitious shoots were only regenerated from nodular structures that formed earlier from the calli at the frequency of 24.4 percent. Regenerated shoots easily grew into plantlets with roots and green color on a phytohormone-free MS medium under lighted condition, that were used for node culture as plant materials. Node culture effectively multiplied plantlets in accordance with protocol by Bae et al. (2016). Acclimatized plantlet clusters developed mature plant clusters under inland environment, followed by flowering the following April. Results were merged with node culture protocol suggested by Bae et al. (2016), which, as an in vitro propagation system for sea-milkwort, may contribute to natural habitat restoration.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.3
• /
• pp.219-232
• /
• 2013

This paper presents a microstrip antenna which recovers its resonant frequency and impedance shifted automatically by the approach of other objects such as hands. This can be used for telemetry sensor applications in the ultrahigh frequency(UHF) industrial, scientific, and medical(ISM) band. It is the key element that an frequency-reconfigurable antenna could be electrically controlled. This antenna is miniaturized by loading the folded plates at both radiating edges, and varactor diodes are installed between the radiating edges and the ground plane to control the resonant frequency by adjusting the DC bias asymmetrically. Using this voltage-controlled antenna and the micro controller peripheral circuits of reading the returned level, the antenna is designed and fabricated which recovers its resonant frequency and impedance automatically. Designed frequency auto recovering antenna is conformed to be recovered within a few seconds when the resonant frequency and impedance are shifted by the approach of other objects such as hand, metal plate, dielectric and so on.