• Journal of Korea Society of Industrial Information Systems
• /
• v.24 no.6
• /
• pp.25-34
• /
• 2019

VTON (Virtual try-on) is a key technology that can activate the online commerce of fashion items. However, the early 3D graphics-based methods require the 3D information of the clothing or the human body, which is difficult to secure realistically. In order to overcome this problem, Image-based deep-learning algorithms such as VITON (Virtual image try-on) and CP-VTON (Characteristic preserving-virtual try-on) has been published, but only a sampled results on performance is presented. In order to examine the strength and weakness for their commercialization, the performance analysis is needed according to the complexity of the clothes, the object posture and body shape, and the degree of occlusion of the clothes. In this paper, IoU and SSIM were evaluated for the performance of transformation and synthesis stages, together with non-DL SCM based method. As a result, CP-VTON shows the best performance, but its performance varies significantly according to posture and complexity of clothes. The reasons for this were attributed to the limitations of secondary geometric deformation and the limitations of the synthesis technology through GAN.

• The Research Journal of the Costume Culture
• /
• v.22 no.2
• /
• pp.209-224
• /
• 2014

This study aims to compare the ease of shirt patterns in the men's wear market that have been constantly developing, and to analyze the fitness and appearance through the 3D virtual try-on system. The study selected three industrial patterns and two educational materials of classic-fit and slim-fit shirts for a total of ten items. The experiments involved virtual wearing, a stress contact point perspective map, and appearance evaluations. First, the ease differed significantly in the chest, waist, and sleeve cap height according to the patterns. Second, based on the stress, contact point, and transparency, there was ease in the order of Nam, D-brand, J-brand, Park, and S-brand in the classic-fit shirts while the order of D-brand, Nam, J-brand, Park, and S-brand resulted in the slim-fit shirts. Third, in the appearance evaluation, higher points resulted in the order of J-brand, Park, S-brand, D-brand, and Nam in both classic-fit and slim-fit. The results showed that proper ease differs greatly by shirt-fit and target age. Also, the shirts with more ease tended to be evaluated less favorably in the appearance evaluation. Based on the results, the study suggests that the proper ease in chest circumference is 18cm for the classic-fit shirts and 6 cm for the slim-fit shirts.

• Fashion & Textile Research Journal
• /
• v.17 no.3
• /
• pp.421-428
• /
• 2015

This research is to understand customer satisfaction with virtual fitting based on a 3D body scanner and avatars as well as differences between avatars and the 'real me'. To this end, this research examined Korean college students to facilitate 3D body scanning, avatar generation and surveys. The author used 3D body scan data with direct measurements to identify differences between the 3D body scan data-based 'my avatar' and 'real me' in the virtual dress fitting system. The survey results on 'the level of customer awareness on 3D body scanner' found that the majority of both genders did not know about it and indicated a lower usability to incorporate IT technology into the fashion industry. The question in the 3D body scanning and avatar found an affirmative attitude. Satisfaction levels on the 3D avatars' similarity with 'own body' and garment fitting were positive and indicated a need for further technological improvements to express the avatars identical to customers' own body. More research is necessary for the accuracy of sizes for 3D body scanning that measure body sizes while wearing clothes. Avatars based on such datamay be less similar to 'own body' and cause customer dissatisfaction. Thus, further technology development is required to narrow gaps using data to make avatars that provide more accurate virtual fitting simulation services to customers.

• Journal of Advanced Navigation Technology
• /
• v.11 no.1
• /
• pp.99-104
• /
• 2007

On-line avatar community service requires natural representation of communication, emotional expression, and popular dances and various kinds of services. The space should be dynamic, and the interaction between the motions of avatars and the space is required. The avatars with their national, interesting, and various motions should be implemented togetherwith interaction with virtual spaces, in order to have competition in developing 3D avatars. It is expected for 3D avatars to be broadly applied for 3D shopping malls for e-commerce, cyber model houses, 3 D simulations, and 3D virtual reality game. Therefore, for one line 3D avatar community services, we try to provide the scheme for making interactive virtual spaces, together with 3D avatar animations.

• Fashion & Textile Research Journal
• /
• v.17 no.2
• /
• pp.265-277
• /
• 2015

The aim of this study was to successfully reflect human body changes on the transformation of the virtual body within 3D virtual fitting spaces. For this purpose, existing problems of shape transformation of the virtual body were analyzed and regression equations which provides useful basic data for transformation of the virtual body that can be applied usefully to the 3D virtual fitting system was developed. Necessary data for the analyses were body measurement and 3D scan data of women with average physical form between the ages of 40 through 49. The reason that we used human body changes of the female subjects in their forties was based on the recognition that fundamental female body changes start to occur from age of forty. Body shapes were largely divided into 3 groups according to obesity which was found to be the biggest factor of shape change. Seven factors were extracted based on factor analysis of 47 body measurement categories and regression equations were created to extract specific measurements for each BMI group based on these seven factors. The major contribution of this paper can be summarized as follows. First, the regression equations to extract specific measurements based on the 7 representative variables remediated existing problem of virtual bodies as it increased the number of body shape transformation areas. Second, the regression equations helped to overcome the problem of current failing to reflecting changes in body cross-section shape based on simple girth measurements based on analysis of cross-section distances.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.12
• /
• pp.1968-1979
• /
• 2010

New technology that includes 3D body scanning, digital virtual human, and digital virtual garments has had a significant impact on the current apparel industry. Virtual simulation technology enables the visualization of a 3D virtual garment on a virtual avatar so that consumers can try on garments with their virtual avatars before purchasing. However, the manual virtual avatar provided for online apparel shopping currently has revealed limitations on the different body sizes and shapes of customers. This study analyzes the process of designing the automatic virtual avatar and the manual virtual avatar using OptiTex software; in addition, the study compares the practicality of the automatic virtual avatar with that of the manual virtual avatar. Data was examined by evaluating how much each virtual avatar is similar to the real body and how well it matched the needs of the current apparel industry. In the study, Avatar 1 was automatically created from three-dimensional body scan data and Avatar 2 was manually created from body measurements. The virtual avatar images laid over a real body image and the results were evaluated by comparing the simulated sizes of virtual avatars with those of a real body. Consequently, Avatar 1 was evaluated as more similar to the real body than Avatar 2 in all five body shapes. This study illustrates that an automatic virtual avatar might solve the fit problem that is the most common reason for a high return rate for online shopping. The results show that future virtual simulation technology needs to be improved for the practicality of the virtual avatars.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.45 no.3
• /
• pp.439-452
• /
• 2021

The purpose of this thesis is to compare the efficiency of 3D digital design technology with traditional hand-drawn designs of a transformable dress for a small wedding. After reviewing the literature, this empirical study analyzed the tendencies of small wedding dress design, concluding that a transformable dress for a small wedding consists of a bodice, skirt, and outer skirt or gown with train, each of which has five possible designs, resulting in 15 virtual items within the 3D program. The 3D program provides the benefit of easy design development as well as reduced costs and design time. Specifically, the random combination of 15 items with layers in the 3D program produced 150 different styles in 5 hours, while hand-drawing 150 dresses took 50 hours. Moreover, the 3D program does not need any material, but 150 physical drawings required a sketchbook, pencil, eraser, and marker, total cost 31,100 won. Additionally, the 3D whole-body scan helps the bride decide which design she prefers through virtual try-ons. Eventually, the 3D program could help a bride decide what she prefers and produce it with virtual simulation, resulting in reduced time and costs.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1996.06a
• /
• pp.75-86
• /
• 1996

Three-Dimensional finite element analysis is performed using PAM-STAMP for design evaluation of automotive back door inner panel die. Gravity process by blanks own weight, binder-wrap process, and drawing process in the forming operations are sequentially simulated with Virtual Manufacturing Method. The most valuable result in this research is that 3-D FEM analysis can be applied to the design evaluation of draw die in the die try-out, though effects of mesh size and drawbead resistance force on the numerical accuracy are much sensitive. For the intensive application to draw-die design and try-out, the experimental know-hows about the forming variables such as friction coefficient, punch velocity, drawbead force, etc are necessary.

• Transactions of Materials Processing
• /
• v.6 no.2
• /
• pp.152-160
• /
• 1997

Three-Dimensional finite element analysis is performed using PAM-STAMP for design evaluation of automotive back door inner panel die. Gravity process by blank own weigth, binder-wrap process, and drawing process in the forming operations are sequentially simulated with Virtual Manufacturing Method. The most valuable result in this research is that 3-D FEM analysis can be applied to the design evaluation of draw dies in the die try-out, though effects of mesh size and drawbead resistance force on the try-out, the experimental knowhows about the forming variables such as friction coefficient punch velocity, drawbead force, etc are necessary.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.4
• /
• pp.737-742
• /
• 2019

This paper is a study on the production of mixedeality contents by realizing AR coloring technology, virtual environment, and VR devices by realizing the interaction in virtual environment. In this study, we designed and produced the content from a fairy tale called 'Cinderella' to produce and demonstrate real mixed reality contents. 'Cinderella' shows 3D modeling in the virtual space using the Oculus Rift, and the modeled shoes can be lifted using Leap-Motion. It is a virtual augmented interaction content for exhibition and experience that can move a specific range from the foot on the treadmill. In this paper, we try to share the experience of creating new mixed reality game contents, which is a mixture of augmented reality and virtual reality technology, and continuation of universal use of this field.