• The Journal of Korean Society for Radiation Therapy
• /
• v.31 no.1
• /
• pp.7-15
• /
• 2019

Purpose: The purpose of this study is to evaluate beam delivery accuracy for small sized lung SBRT through experiment. In order to assess the accuracy, Eclipse TPS(Treatment planning system) equipped Acuros XB and radiochromic film were used for the dose distribution. Comparing calculated and measured dose distribution, evaluated the margin for PTV(Planning target volume) in lung tissue. Materials and Methods : Acquiring CT images for Rando phantom, planned virtual target volume by size(diameter 2, 3, 4, 5 cm) in right lung. All plans were normalized to the target Volume=prescribed 95 % with 6MV FFF VMAT 2 Arc. To compare with calculated and measured dose distribution, film was inserted in rando phantom and irradiated in axial direction. The indexes of evaluation are percentage difference(%Diff) for absolute dose, RMSE(Root-mean-square-error) value for relative dose, coverage ratio and average dose in PTV. Results: The maximum difference at center point was -4.65 % in diameter 2 cm size. And the RMSE value between the calculated and measured off-axis dose distribution indicated that the measured dose distribution in diameter 2 cm was different from calculated and inaccurate compare to diameter 5 cm. In addition, Distance prescribed 95 % dose($D_{95}$) in diameter 2 cm was not covered in PTV and average dose value was lowest in all sizes. Conclusion: This study demonstrated that small sized PTV was not enough covered with prescribed dose in low density lung tissue. All indexes of experimental results in diameter 2 cm were much different from other sizes. It is showed that minimized PTV is not accurate and affects the results of radiation therapy. It is considered that extended margin at small PTV in low density lung tissue for enhancing target center dose is necessary and don't need to constraint Maximum dose in optimization.

• Journal of the Korean Society of Radiology
• /
• v.15 no.1
• /
• pp.45-54
• /
• 2021

This study was written to create educational content in non-destructive fields based on Mixed Reality. Currently, in the field of radiation, there is almost no content for educational Mixed Reality-based educational content. And in the field of non-destructive inspection, the working environment is poor, the number of employees is often 10 or less for each manufacturer, and the educational infrastructure is not built. There is no practical training, only practical training and safety education to convey information. To solve this, it was decided to develop non-destructive worker education content based on Mixed Reality. This content was developed based on Microsoft's HoloLens 2 HMD device. It is manufactured based on the resolution of 1280 ⁎ 720, and the resolution is different for each device, and the Side is created by aligning the Left, Right, Bottom, and TOP positions of Anchor, and the large image affects the size of Atlas. The large volume like the wallpaper and the upper part was made by replacing it with UITexture. For UI Widget Wizard, I made Label, Buttom, ScrollView, and Sprite. In this study, it is possible to provide workers with realistic educational content, enable self-directed education, and educate with 3D stereoscopic images based on reality to provide interesting and immersive education. Through the images provided in Mixed Reality, the learner can directly operate things through the interaction between the real world and the Virtual Reality, and the learner's learning efficiency can be improved. In addition, mixed reality education can play a major role in non-face-to-face learning content in the corona era, where time and place are not disturbed.

• Journal of Biomedical Engineering Research
• /
• v.33 no.4
• /
• pp.184-193
• /
• 2012

Many studies have reported that housework done using household appliances may affect biomechanical characteristics of the musculoskeletal system. The purpose of this study was to investigate the effects of housework done using a pulsator washing machine on joints and muscles. We calculated joint torques and muscle strengths on the basis of an experimental/virtual three-dimensional motion analysis for six healthy females using the pulsator washing machine at different heights (H) and depths (D) of the inside drum (H (mm){\times}D (mm), Trial1: $962.5{\times}609.4$, Trial2: $962.5{\times}624.4$, Trial3: $982.5{\times}644.4$, Trial4: $995.5{\times}642.4$, Trial5: $1015.5{\times}677.4$). The joint torques and muscle strengths tended to be considerably different during torso flexion in the sagittal plane for all the trials. The maximum joint torques for the thoracic vertebra, left ankle, and right shoulder measured in Trial4 were significantly higher than those measured in the other trials (p < 0.05); in addition, those for the thoracic vertebra and both ankles measured in Trial5 were significantly higher than those measured in the other trials (p < 0.05). The maximum muscle strengths for the left trapezius muscle and both tibialis anterior muscles measured in Trial5 were significantly higher than those measured in the other trials (p < 0.05). These results indicate that housework done using a pulsator washing machine may affect joint torques and muscle strengths, and these effects are dependent on the height and/or depth of the inside drum of the pulsator washing machine.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.44 no.2 s.314
• /
• pp.37-46
• /
• 2007

In this paper, we propose technologies for enhancing the immersive realization of virtual objects in AR-based product design. Generally, multimodal senses such as visual/auditory/tactile feedback are well known as a method for enhancing the immersion in case of interaction with virtual objects. By adapting tangible objects we can provide touch sensation to users. A 3D model of the same scale overlays the whole area of the tangible object so the marker area is invisible. This contributes to enhancing immersion. Also, the hand occlusion problem when the virtual objects overlay the user's hands is partially solved, providing more immersive and natural images to users. Finally, multimodal feedback also creates better immersion. In our work, both vibrotactile feedback through page motors, pneumatic tactile feedback, and sound feedback are considered. In our scenario, a game-phone model is selected, by way of proposed augmented vibrotactile feedback, hands occlusion-reduced visual effects and sound feedback are provided to users. These proposed methodologies will contribute to a better immersive realization of the conventional AR system.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.18-18
• /
• 2017

ISO11783은 농업 산업분야 통신 프로토콜의 국제 표준으로, 농용트랙터 및 작업기 ECU 간의 통신 프로토콜을 표준화한다. 이 표준은 서로 다른 제조사의 제품 간에 호환성을 갖게 하며, 정밀 농업에 대한 핵심 기반을 제공한다. 현재 해외에서는 이미 ISO11783 기반의 AFS(Advanced Farming System)를 통한 정밀농업이 상용화되어 농가에 보급되고 있다. 이에 비해, 국내에서 이러한 표준을 따르는 농기계들은 미비한 실정이며, 향후 농업의 정밀 농업화를 통한 고부가가치 창출 및 선진국의 무역 장벽에 대비와 해외 수출 판로 개척을 위해 ISO11783 표준에 대한 R&D가 필요로 한다. 이에 IsoAgLib를 분석하고 임베디드 보드에 Porting하여 ISO11783 기반 작업기 ECU를 구현하였고, 이를 기반으로 ISO11783 기반 작업기 ECU의 구현 방법을 발표한다. IsoAgLib의 시스템 아키텍처는 계층화 되어 있어, 타겟에 의존적인 계층만 수정하여, IAR 환경에서 Cortex M3 보드에 포팅을 완료하였다. 작업기 ECU들은 자신만의 인터페이스 화면을 갖으며, 이를 Object pool이라 한다. 이것을 Virtual Terminal(VT)에 업로드 하여, VT가 해당 작업기 ECU의 사용자 인터페이스 기능을 제공하도록 한다. 이에 작업기 ECU 구현 1 단계로, 'VT-Designer'를 통하여 Object pool를 설계한다. 2 단계, 'vt2iso'를 통해서 Object pool을 IsoAgLib 상에서 사용할 수 있도록 변환한다. 3 단계, 포팅된 IsoAgLib project에 변환된 파일을 포함 시킨다. 4 단계, 작업기 ECU의 주기적인 작업 및 각 메시지 수신시 수행할 작업을 코딩한다. 5 단계, 빌드 및 타겟 보드에 업로딩 한 후, New Holland 사의 $Intelliview^{TM}$ iv display (VT)과 연결하여 동작을 확인한다. 확인 결과로 VT에 디자인한 Object pool이 표시 되며 soft key 입력 시 작업기 ECU에서 LED가 변한다. 결론적으로, 연구 결과를 바탕으로 ISO11783 기반의 작업기 ECU의 디자인 및 구현이 가능하며, 이를 통해 향후 국내의 ISO11783 기반의 작업기 ECU의 개발에 도움을 줄 수 있다.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.22 no.1
• /
• pp.59-76
• /
• 2020

As a continuous increase in demand for the transportation infrastructure in the metropolitan area, the renovation of existing metropolitan and urban railway lines for the rapid transport system requires the construction of sidetrack that can operate local and express trains simultaneously. However, the construction of sidetrack after stopping the operation of the existing subway line causes a lot of economic losses, therefore it is essential to study the tunnel enlargement scheme during the operation of the existing subway tunnel. Accordingly, in this paper, basic research on the enlargement plan of the existing subway tunnel was carried out for the renovation of the existing subway line. In order to investigate the method for the sidetrack construction, the Government Complex Gwacheon station on the Gwacheon line of subway line 4 was selected as a virtual research station. Subsequently, four construction plans including tunnel cross-sectional plan for each section were reviewed and constructability and economic feasibility were compared. Finally, the stability assessment was conducted for the selected construction plan which was considered to be relatively unstable by 3-D full numerical analysis considering the sidetrack construction process.

• Cartoon and Animation Studies
• /
• s.45
• /
• pp.27-50
• /
• 2016

The present study argues that documentary-animation films, which are based on actual human voices, on the level of representation, constitute a new expansion for the medium of animation films, which serve as testimonies to the real world. Animation films are produced using very diverse techniques so that they are complex to the degree of being indefinable, and documentary films, though based on objective representation, increase in complexity in that there exist various types of artificial interventions such as direction and digital image processing. Having emerged as a hybrid genre of the two media, documentary-animation films draw into themselves actual events and elements so that they conceptually share reality-based narratives and are visually characterized by the trappings of animation films. Generally classified as 'animated documentaries', this genre triggered discussions following the release of , a work that is mistaken as having used rotoscoping transforming live action in terms of the technique. When analyzed in detail, however, this work is presented as an ambiguous medium where the characteristics of animation films, which are virtual simulacra without reality, and of documentaries, which are based on the objective indexicality of the referents, coexist because of its mixed use of typical animation techniques, 3D programs, and live-action images. Discussed in the present study, , , and share the characteristics of the medium of documentaries in that the narratives develop as testimonies of historical figures but, at the same time, are connected to animation films because of their production techniques and direction characteristics. Consequently, this medium must be discussed as a new expansion rather than being included in the existing classification system, and such a presupposition is an indispensable process for directly facing the reality of the works and for developing discussions. Through works that directly use the interviewees' voices yet do not transcend the characteristics of animation films, the present study seeks to define documentary-animation films and to discuss the possibility of the medium, which has expanded as a testimony to the real world.

• Korean Journal of Construction Engineering and Management
• /
• v.6 no.1 s.23
• /
• pp.99-108
• /
• 2005

Interactive electronic technical manual(IETM) for construction projects means an electronic tool that regulations and specifications related to construction method or maintenance process ale described by electronic book type. It has a meaning of integrated information system that includes virtual reality(VR), 3D animation and image contents for representing real construction information so that user can easily understand the construction situation and maintenance process. The basic information and technical manuals of construction facilities are being written as paper documents in our construction industry. As the result, the information management in the maintenance phase of construction projects is inefficient, and maintenance cost is being increased. This study attempts to improve the lack of understanding about construction IETM through the analysis of necessity and unique function of construction IETM comparing with the IETMS in other industry, Finally, this study shows a scenario of construction IErM for mitigating natural disaster of construction facilities to verify applicability of IETM.

• Journal of Energy Engineering
• /
• v.28 no.3
• /
• pp.18-25
• /
• 2019

In this study, in order to solve the problem of the program of calculating code input by experienced users in the power generation, the wide area energy network research group developed the local heating operation analysis program EntPLAN, which can be easily used by anyone, including scalability, with domestic technology. Therefore, the Commission intended to compare the heat sources, heat demand, and the results of operation of the combined heat plant (CHP) on the energy network through simulation with the EnetPLAN and the program A on the market. The results showed that the heat and power output on the energy network of the EnetPLAN and A programs were mostly similar in pattern in the simulation results of the heat supply and the operation method of the accumulator. This enabled the application of the simulation for the various operation modes of the cogeneration facilities existing on the energy network. It is expected that EntPLAN, which was developed with domestic technology, will be easily applied in the field in the future and will present efficient operation simulation results.

• Progress in Medical Physics
• /
• v.26 no.4
• /
• pp.201-207
• /
• 2015

The new function of 3DVH software for dose calculation inside the patient undergoing TomoTherapy treatment by applying the measured data obtained by ArcCHECK was recently released. In this study, the dosimetric accuracy of 3DVH for the TomoTherapy DQA process was evaluated by the comparison of measured dose distribution with the dose calculated using 3DVH. The 2D diode detector array MapCHECK phantom was used for the TomoTherapy planning of virtual patient and for the measurement of the compared dose. The average pass rate of gamma evaluation between the measured dose in the MapCHECK phantom and the recalculated dose in 3DVH was $92.6{\pm}3.5%$, and the error was greater than the average pass rate, $99.0{\pm}1.2%$, in the gamma evaluation results with the dose calculated in TomoTherapy planning system. The error was also greater than that in the gamma evaluation results in the RapidArc analysis, which showed the average pass rate of $99.3{\pm}0.9%$. The evaluated accuracy of 3DVH software for TomoTherapy DQA process in this study seemed to have some uncertainty for the clinical use. It is recommended to perform a proper analysis before using the 3DVH software for dose recalculation of the patient in the TomoTherapy DQA process considering the initial application stage in clinical use.