• Fashion & Textile Research Journal
• /
• v.17 no.3
• /
• pp.421-428
• /
• 2015

This research is to understand customer satisfaction with virtual fitting based on a 3D body scanner and avatars as well as differences between avatars and the 'real me'. To this end, this research examined Korean college students to facilitate 3D body scanning, avatar generation and surveys. The author used 3D body scan data with direct measurements to identify differences between the 3D body scan data-based 'my avatar' and 'real me' in the virtual dress fitting system. The survey results on 'the level of customer awareness on 3D body scanner' found that the majority of both genders did not know about it and indicated a lower usability to incorporate IT technology into the fashion industry. The question in the 3D body scanning and avatar found an affirmative attitude. Satisfaction levels on the 3D avatars' similarity with 'own body' and garment fitting were positive and indicated a need for further technological improvements to express the avatars identical to customers' own body. More research is necessary for the accuracy of sizes for 3D body scanning that measure body sizes while wearing clothes. Avatars based on such datamay be less similar to 'own body' and cause customer dissatisfaction. Thus, further technology development is required to narrow gaps using data to make avatars that provide more accurate virtual fitting simulation services to customers.

• Journal of Korea Multimedia Society
• /
• v.15 no.7
• /
• pp.941-950
• /
• 2012

A virtual garment fitting system which fits the top and bottom of a garment on 3D body data is introduced. This system uses the laser scanned 3D body data and the digital images photographed the front and back of a garment. The digital images are modeled to reflect tensions among particles in the images and the friction and gravity effects are considered in the fitting process to the body data. When a bottom is fitted, a virtual belt to hold the bottom in the waist is introduced since gravity effects pull down it. Also the process for fitting the top and bottom on layers is proposed here. The system has the strengths that it uses only the front and back image of a garment instead of using complicated patterns of a garment, and provides a realistic fit result as a 3D figure. As on-line retailing shop in present displays front and back images of garments, this system also does. However this system provides a differentiated service to user than present retailing shop as showing a 3D fit image. It will make a new trend in online shop retailing of garment.

• Journal of Fashion Business
• /
• v.22 no.3
• /
• pp.122-142
• /
• 2018

In the virtual fitting system, the use of a 3D avatar is not a simple garment model, but it should be able to reproduce the size and shape of the customer using a fitting system. Although various virtual fitting systems have their own 3D avatar sizing systems and provide 3D avatars that match the size of the customer, there are limitations in realizing the actual body shape in actual use by the consumer. The purpose of this study is to realize a 3D avatar with excellent size and conformity for customer use. Therefore, this study aims to provide basic data for the formation of a 3D standard avatar of Korean women aged in their 20's, by comparing and analyzing the degree of the consumer user friendly system change of a body type, and the consumer's ability in selecting a consumer representative body type. Based on the survey data of 'Size Korea' conducted from 2004 to 2015 at three times, we examined the change of body shape over 10 years. Then, based on the results of 6th and 7th data, 4 factors of the concurrent body shape change of women of the consumer demographic studied were selected through the use of a factor analysis. Following this analysis, the 4 extracted factors were clustered again and finally released 7 representative body types, which were obtained based on height and weight. The size of each representative figure is derived by the use of a regression analysis, and it is used as a basic data for 3D avatar formation of the virtual fitting system.

• Journal of Korea Multimedia Society
• /
• v.9 no.9
• /
• pp.1184-1195
• /
• 2006

The Internet has brought many changes in our daily lives. Now the recognition on the Internet fashion shopping matt has increased and it requires scientific and systematic research to understand the Internet fashion marketing system more correctly and to strengthen the marketing activity at the virtual space. A big shortcoming of an Internet fashion mall is that the consumers can't wear clothes themselves. Currently there is no system to cover the shortcoming, It would be nice if a 3D avata wears the clothes on behalf of a consumer after inputting the information of physical sizes of a consumer. The consumers can select many clothes, accessories and even the background. After establishing a complete virtual fashion shopping mall, the consumers who sue the Internet fashion shopping mall could wear the clothes at an online shop establishing an online shopping environment. It will be a sole way to ensure the trust of the consumers. This paper studies the read in reflection by PC camera and sample the edge detection. Virtual fitting system that wears virtual fitting model some clothes is establishment.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.36 no.3
• /
• pp.269-281
• /
• 2012

This study investigates the influence of technology readiness, fashion innovativeness, and participation level perception on the acceptance intention of 3D virtual fitting systems. We presented a 3D virtual fitting system with detailed information that was watched by respondents who subsequently completed a research questionnaire. The data were collected from 300 subjects with an age range of 21 to 39 who have experienced Internet shopping. Descriptive statistics, Cronbach's alpha, factor analysis, correlation analysis, and multiple regression analysis were conducted. The results were as follows. First, fashion innovativeness, technology innovativeness, participation level perception, and optimism significantly influenced the acceptance intention. Second, fashion innovativeness, technology innovativeness, participation level perception, and optimism positively influenced the acceptance intention in the male group; however, technology innovativeness, participation level perception, optimism, and insecurity significantly influenced the acceptance intention in the female group. The results indicated that a marketing strategy has to be designed that focuses on consumers with high technology, fashion innovativeness, and optimism to increase the acceptance intention. In addition, markers have to enhance a participation level perception that will contribute to the introduction of 3D virtual fitting systems. Another notable finding was the importance to differentiate marketing strategies according to gender.

• Journal of the Korean Society of Costume
• /
• v.66 no.8
• /
• pp.46-60
• /
• 2016

Countries have different brassiere patterns, and this study produced and compared 3/4 brassiere patterns from different countries to determine the difference in patterns, and to investigate the stress distribution and shape of cross section while wearing brassieres using 3D virtual fitting system. Despite the growing interest in underwear, there is a lack of related books and research on brassiere patterns, which causes the difference in sizes and pattern drafting methods by countries. Thus, research on this is needed. 3D virtual fitting system has been introduced to compare patterns, thereby improving visible effects and reducing the loss in cost caused by underwear pattern fitting test. According to the result of pattern analysis, The Secoli type exhibited the least breast cover rate (14.9 cm), while the largest cover rate was shown in Christina and ESMOD types (17.7 cm). It is believed that the difference in pattern drafting causes the difference in the total length of a brassiere. Furthermore, the Secoli, Moda Burgo, and ESMOD brassieres drafted from basic bodice pattern were found to be longer than the Christina and Han Sunmi brassieres attained from direct pattern drafting. Moreover, the darts' volume of upper and lower cups in Christina and Han Sunmi types was similar in shape. The shapes of cradle drafted from basic bodice pattern were a straight line, while those from direct drafting formed a curved shape. In fitting multiple cross sections, the Secoli, Moda Burgo, and ESMOD brassieres had gaps between the brassieres and the body. Among these, the largest number of gaps was observed in the ESMOD type pattern. This study aimed at performing comparative analysis of various brassieres' pattern drafting types as a basic research for developing a brassiere pattern drafting type.

• Journal of Fashion Business
• /
• v.17 no.1
• /
• pp.30-41
• /
• 2013

Augmented reality techniques have been increasingly employed in the textile and fashion industry as well as computer graphics sectors. Three-dimensional virtual clothing CAD systems have also been widely used in the textile industries and academic institutes. Motion tracking techniques are grafted together in the 3D and augmented reality techniques in order to develop the virtual three-dimensional clothing and fitting systems in the fashion and textile industry sectors. In this study, three-dimensional virtual clothing sample has been prepared using a 3D virtual clothing CAD along with a 3D scanning and reconstruction system. Motion of the user has been captured through an RGB-D sensor system, and the virtual clothing fitted on the user's body is allowed to move along with the captured motion flow of the user. Acutal fabric specimens are selected for the material characterization. This study is a primary step toward building a comprehensive system for the user to experience interactively virtual clothing under real environment.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.18 no.1
• /
• pp.191-203
• /
• 2016

The 3D virtual fitting system is a new and very efficient system replacing real fitting in apparel industry and on-line shopping. It is a win-win system for both of consumer and manufacturer which not only reduces design and production time but also resolves consumer's complaints by checking the wearing image beforehand. It is a must-have item in the future. The purpose of this study is to analyze sizing menu, terms, and current status and to figure out problems of avatar sizing programs which substitute human bodies in virtual fitting. We chose three existing outstanding programs in domestic and global market, compared and analyzed the program, manual, and terms that are used in avatar sizing, and investigated the strengths, weaknesses, problems of options and terms and finally suggested an alternative terms. The revealed problems are as follows: each program supports various avatars ranging from male to female, from child to adult, and from oriental style to western style. The image of the avatar could be changed through the options for hair style, shoes and accessories. But we found out some problems. The avatar body types are far from actual human body types, avatar sizing menus and item terms are different from program to program, and terms not yet standardized. Cooperative efforts of industry and academy on standardization of sizing menus and terms should be emphasized for the virtual fitting system to be widely used like the other computer graphic programs or word editors.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.15 no.2
• /
• pp.1-13
• /
• 2013

The study is to provide basic data on improving costume's fitting by developing physical integrated Basic Bodice Block's development for body types of adult women, which is based on setting up body-type information per truncus as fundamental of adult women's top product manufacture in being ready for Mass Customization era. Also, after review on the objectivity and accuracy of fitting information by real wear and virtual wear experiment on body types, not only 3D virtual clothing system was used as way of information provider of Clothing product, but also provided as basic data in order to use effectively on portion of clothing passion in responding to trend of Mass customization in advance. The consequence of the study is as followings. After analyzing significance differences per items on real and virtual wear evaluation, bowed type of type 1 had significance differences on waist measurement and hip circumference in back and side, which would be knowing as not integrated with costume, affecting form of human body according to virtual wear system bended on back region. Also, in side evaluation, every types except straight body type of type 3 appeared significant differences. In virtual wear evaluation, costume's expression with side body types were not similar to real wear until now except straight body types. It would be improvement things from 3D virtual wear system in advance.

• Fashion & Textile Research Journal
• /
• v.17 no.2
• /
• pp.265-277
• /
• 2015

The aim of this study was to successfully reflect human body changes on the transformation of the virtual body within 3D virtual fitting spaces. For this purpose, existing problems of shape transformation of the virtual body were analyzed and regression equations which provides useful basic data for transformation of the virtual body that can be applied usefully to the 3D virtual fitting system was developed. Necessary data for the analyses were body measurement and 3D scan data of women with average physical form between the ages of 40 through 49. The reason that we used human body changes of the female subjects in their forties was based on the recognition that fundamental female body changes start to occur from age of forty. Body shapes were largely divided into 3 groups according to obesity which was found to be the biggest factor of shape change. Seven factors were extracted based on factor analysis of 47 body measurement categories and regression equations were created to extract specific measurements for each BMI group based on these seven factors. The major contribution of this paper can be summarized as follows. First, the regression equations to extract specific measurements based on the 7 representative variables remediated existing problem of virtual bodies as it increased the number of body shape transformation areas. Second, the regression equations helped to overcome the problem of current failing to reflecting changes in body cross-section shape based on simple girth measurements based on analysis of cross-section distances.