• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2007년도 추계종합학술대회
• /
• pp.285-288
• /
• 2007

3차원 초음파 센싱에 의해 획득한 데이터로부터 물체의 부피를 자동으로 측정하고 분류적재 관리하는 임베디드시스템을 프로세서 기반으로 구현한다. 부피측정은 3개의 초음파 센서에서 획득한 데이터에서 높이와 폭은 물체가 컨베이어를 통과할 때 3 값을 기준 값과 비교하여 측정하고 길이는 물체가 처음 감지된 시점부터 범위를 벗어날 때까지의 시간을 물체의 이동속도에 대입하여 측정한다. 또한 센서의 온도 변화에 속도가 변하기 때문에 환경에 따라 보정하고 물체가 정방향이 아닐 경우 센싱값을 평균하여 오차를 줄인다. 실험은 직육면체를 기준하였으며 포장된 물류를 크기별로 분류하고 창고 및 이동체에 적재 할 경우 실용적으로 활용가능성을 높인다.

• 비파괴검사학회지
• /
• 제29권4호
• /
• pp.283-292
• /
• 2009

Laser-based ultrasonic sensing requires the probe with fixed fecal length, but this requirement is not essential in laser-based ultrasonic generation. Based on this fact, we designed a pulsed laser-based ultrasonic wave propagation imaging (UWPI) system with a tilting mirror system for rapid scanning of target, and an in-line band-pass filtering capable of ultrasoaic mode selection. 1D-temporal averaging, 2D-spatial averaging, and 3D-data structure building algorithms were developed far clearer results allowing fur higher damage detectability. The imaging results on a flat stainless steel plate were presented in movie and snapshot formats which showed the propagation of ultrasound visible as a concentric wavefield emerging from the location of an ultrasonic sensor. A hole in the plate with a diameter of 1 mm was indicated by the scattering wavefields. The results showed that this robust UWPI system is independent of focal length and reference data requirements.

• 센서학회지
• /
• 제14권2호
• /
• pp.116-124
• /
• 2005

In this paper range measurement systems are designed using an ultrasonic sensor and a camera. An ultrasonic sensor provides the range measurement to a target quickly and simply but its low resolution is a disadvantage. We tackle this problem by employing a camera. Instead using a stereoscopic sensor, which is widely used for 3D sensing but requires a computationally intensive stereo matching, the range is measured by focusing and structured lighting. In focusing a straightforward focusing measure named as MMDH(min-max difference in histogram) is proposed and compared with existing techniques. In the method of structure lighting, light stripes projected by a beam projector are used. Compared to those using a laser beam projector, the designed system can be constructed easily in a low-budget. The system equation is derived by analysing the sensor geometry. A sensing scenario using the systems designed is in two steps. First, when better accuracy is required, measurements by ultrasonic sensing and focusing of a camera are fused by MLE(maximum likelihood estimation). Second, when the target is in a range of particular interest, a range map of the target scene is obtained by using structured lighting technique. The systems designed showed measurement accuracy up to 0.3[mm] approximately in experiments.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1998년도 추계학술대회
• /
• pp.315-316
• /
• 1998

The purpose of this study is a potentiality examination of an infrared camera system for the 3D navigator which can be used in the field of neurosurgery. Nowadays, CAS(computer aided surgery) technique using 3D navigator is rapidly spread into the neurosurgeric operation such as brain and spine surgery. Several techniques which can detect 3D position of a probe have been proposed. These include mechnical arm, magnetic field, optical and ultrasonic sensing methods. In this study, we decided that using optical sensing method and tested a conventional CCD camera with a infrared filter and LEDs. Pulnix TM-300 camra has sufficient spectral response in the range of near infrared. Acquired image of infrared LEDs also sufficient quality.

• Smart Structures and Systems
• /
• 제1권3호
• /
• pp.267-282
• /
• 2005

This work describes ongoing development of an embedded sensor system for the early detection and prevention of deterioration of reinforcing steel tendons within reinforced concrete. These devices will evaluate the condition of the steel tendon using ultrasonic techniques and then wirelessly transmit this data to the outside world without human intervention. The ultrasonic transducers and the interpretation of the sensed signals that allow detection and prognosis of tendon condition are detailed. Electrical characterization of concrete mixtures used in bridge construction is conducted and a wideband microstrip antenna is designed and fabricated to operate between 2.4 and 2.5 GHz when embedded in such a medium. Simulations and measurements of the embedded antenna element are presented. Transceiver selection and implementation are discussed as well as future work in operational protocols, sensor networking, and power sources. By implementing commercially available off-the-shelf components whenever possible, these devices have the potential to save millions of dollars a year in evaluation, repair and replacement of reinforced concrete.

• 센서학회지
• /
• 제17권2호
• /
• pp.106-113
• /
• 2008

Perceiving a 3D moving target is important for automated machines including robots in a factory. Although stereovision or ultrasonic ranging is often employed for the purpose, the former requires high-cost systems, and the latter suffers from low-resolution. In this paper, we propose a PSD sensor array to acquire the 3D profile of an object conveyed by a belt. Rectangular parallelepiped target objects at random positions and orientations are assumed. Nine PSD sensors are configured in a $3{\times}3$ array above the belt, and fired in a sequence so that cross-talk can be avoided. Time gaps among sensor readings are compensated to get a result that is obtainable when sensors' measurements are made simultaneously along a sensing line. The system designed is tested with various objects in experiments.

• 한국인터넷방송통신학회논문지
• /
• 제15권2호
• /
• pp.263-267
• /
• 2015

현 지뢰탐지기는 탐지를 실시한 곳과 실시하지 않은 지역을 구분할 수 없고, 많은 인력과 시간이 낭비되는 문제점이 있으며, 사용자가 센서 헤드부를 일정한 속도로 움직이지 않거나, 너무 빨리 움직이는 경우 지뢰를 정확히 탐지하기가 곤란하다. 따라서 단방향 초음파 센싱신호를 통한 지뢰탐지 오류 문제점을 개선하고자, Human Body 안테나부, 메인마이크로프로세서 유닛부, 스마트 안경부, 바디장착형 LCD모니터부, 무선데이터 송수신부, 벨트형 전원공급부, 블랙박스형 카메라부, 보안통신 헤드셋으로 구성하여 전투복을 착용한 상태에서 신체의 머리, 몸통, 팔, 허리, 다리에 탈 부착식으로 장착, Superhigh Frequency RF Beam을 통해 지뢰를 탐지하는 Human Body 안테나부를 적용, 지뢰의 금속 비금속이 아닌, 지상(하)에 매설된 기폭제를 전방위($360^{\circ}$)로 탐지할 수 있고, 지뢰의 거리 위치 형태 재질을 2D 또는 3D 영상으로 스마트 안경 및 신체장착형 LCD모니터부에 실시간 표출시킬 수 있으며, 이로 인해 전투병이 지상(하)에 있는 지뢰를 회피, 신속하게 기동할 수 있다. 아울러 휴대용 배터리와 벨트형 전원공급부의 Twin-Self Supplements of electricity을 통해 별도의 충전 없이 3~7일간 전투를 수행할 수 있으며, 원격지의 전투상황을 원격지 전투지휘서버에서 실시간 모니터링할 수 있고, 전투병 1:1로 전투정보를 공유할 수 있어, 전투현장에 있는 것과 같은 생동감 있게 전투상황을 원격지휘할 수 있는 스마트전투시스템을 구축할 수 있는 Smart Wearable Minefield Detection System을 제안하고자 한다.