The profile of unpaved road is an important issue in the reliability of endurance test. Efforts on measuring 2D road profile and analyzing the severity have been continued in the study of performing reliable endurance test evaluations through reflecting the results of such measurement and analysis. However, 2D road profile has limitation in measuring the profile in the road width direction because data is obtained along the trailer wheel track. Therefore, in order to measure 3-dimensional shape of road surface and construct severity DB of 3D road profile, Changwon Proving Ground(CPG) of Agency for Defense Development(ADD) developed 3D profilometer which is composed of laser scanner, IMU, GPS, encoder and so on. This paper focuses on the analysis of unpaved road severity using 3D road profile for army operation roads. This results will be used to manage test courses severity of CPG.
The purpose of this study was to develop an assist device that could correct and support patient position during biopsy on computed tomography (CT) using 3D printing technology. The development method was conducted in the order of 3D design, 3D output, intermediate evaluation for product, final assist device evaluation. The 3D design method was conducted in the order of prior research data survey, measurement, primary modeling, 3D printing, output evaluation, and supplementary modeling. The 3D output was the 3D printer (3DWOX 2X, Sindoh, Korea) with additive manufacturing technology and the polylactic acid (PLA) materials. At this time, the optimal strength was evaluated to infill degree of product as the 3D printing factors into 20%, 40%, 60%, and 80%. The intermediate evaluation and supplementation was measured noise in the region of interest (ROI) around the beam hardening artifact on the CT images. We used 128-channel MDCT (Discovery 75 HD, GE, USA) to scan with a slice thickness of 100 kVp, 150 mA, and 2.5 mm on the 3D printing product. We compared the surrounding noise of the final 3D printing product with the beginning of it. and then the strength of it according to the degree of infill was evaluated. As a result, the surrounding noise of the final and the early devices were measured at an average of 3.3 ± 0.5 HU and 7.1 ± 0.1 HU, respectively, which significantly reduced the noise of the final 3D printing product (p<0.001). We found that the percentage of infill according to the optimal strength was found to be 60%. Finally, development of assist devices for CT biopsy will be able to minimize artifacts and provide convenience to medical staff and patients.
GeoWeb 기술이 발전하면서 재난관리 분야에서도 웹을 통한 2D/3D 공간정보 서비스에 대한 관심과 활용도가 높아지고 있다. 본 논문은 재난사고 현장에서 수집된 다양한 공간정보를 웹 환경에서 시각화하기 위한 3D 공간정보 맵핑 플랫폼 구축에 관한 연구로서, 웹 개발 표준기술인 HTML5/WebGL과 오픈소스를 활용하여 재난사고 현장에서 다양한 형태로 수집된 2D/3D 공간 데이터와 대용량의 LiDAR 점군 데이터에 대한 웹기반의 공간정보 맵핑 서비스 방안을 제시하였다. 첫째, 오픈소스인 GeoServer의 WMS 서비스와 PostGIS를 이용하여 수집된 재난현장 조사 2D 데이터를 공간 DB로 구축한 후 웹 환경에서 렌더링하였다. 둘째, 웹 환경에서 대용량 3D 점군 데이터를 효율적으로 렌더링하기 위하여 다중 해상도의 옥트리 구조를 이용하여 점군 데이터를 2D 타일로 단순화하는 Potree 알고리즘을 적용하였다. 마지막으로 OpenLayers3를 기반으로 3차원 지도를 제어 및 측정하기 위한 기본·응용 기능을 Graphic User Interface(GUI)로 구현하여 2D/3D 공간정보의 웹 시각화를 위한 3D 웹 맵핑 파일럿 시스템을 개발하였다. 향후, 재난현장의 각종 2D 조사 데이터 및 다양한 공간영상정보를 구축된 웹기반 3차원 공간정보시스템에 중첩·표출함으로써 재난사고 과학조사 및 분석 업무에 활용될 수 있을 것으로 기대된다.
The industry of character toys is increasing and new characters are constantly being developed. However, the development of 2D cover patterns for toys is time-consuming due to frequent pattern modifications made through trial and error. Studies are now underway to obtain 2D clothing patterns from 3D body data, however, little research has been done on 2D pattern of character toys. This study suggests efficient guidelines to develop 2D cover patterns with a reasonable accuracy and processing time. Two 3D models of a dog and rabbit were used to develop 2D cover patterns. Independent variables of this study are set as 3 levels of triangle area (small, medium, and large) that influence the efficacy of 3D and 2D pattern development. The determination of the appropriate triangular area was based on the area and shape change of the 2D pattern. A medium or large triangle area was shown to be suitable for a character dog with a smooth curved surface. However, the appropriate triangle area was small if the characteristics of the curved surface are complicated as in the case of rabbit. The head of a dog (a double-curved surface) and the curved forepaw of a rabbit (a triangular area) should be small when the characteristics of the curved surface (such as the hind leg of a rabbit having a large convex surface and a small surface area) are complicated. Grouping by 3D surface characteristics could be a suitable guideline for the triangle area selection.
3D스캔-인체 및 의복 모델링-시뮬레이션-패턴 제작 및 검증의 전체 3D 의복제작 프로세스를 원활히 활용할 수 있도록 하기 위하여 3D 그래픽과 CAD 시스템 그리고 3D-2D 직접 패턴 전개 시스템을 이용해야 하는 데 이 때 장애가 되는 것은 3D 시뮬레이션한 가상의복으로부터 정확한 패턴을 추출하는 것이 어렵고, 전반적 과정의 호환이 쉽지 않다는 것이다. 이에 본 연구에서는 인체에 정확히 밀착된 부분과 드레이프가 있는 비대칭형 드레스를 대상으로 전체 프로세스를 원활하게 구동할 수 있는 방법을 모색하였다. 연구 방법으로는 3D 스캔 데이터를 이용하여 Maya로 범용성 3D 인체 모델을 만들고 이 3D 바디 모델에 맞는 3D 드레스를 디자인하고 모델링한 후, Rapidform, 2C-AN 프로그램과 YukaCAD를 이용하여 정확한 2D 패턴을 제작하는 과정의 호환성을 해결하며 진행하였다. 이 과정에서 도출한 패턴을 실제 의상으로 제작하여 착의 시킨 후 3D 의복 모델과의 여유분 분포를 3차원 측정 기술로 검증하였고 실물 드레스의 드레이프의 모양과 시뮬레이트된 드레스의 모양을 검토하였다. 그 결과 제시한 방법을 활용하면 전반적으로 만족스럽게 정량적인 3D 의복 제작 프로세스를 운영할 수 있음을 확인하였다.
최근 모바일 기술의 진화와 시장 환경의 변화로 게임 콘텐츠의 패러다임이 2D에서 3D로 이동하면서 게임업체들의 관심이 높아지고 있다. 현재는 기술에서 앞서 있는 모바일 3D솔루션 업체나 소수의 대형 CP들 위주로3D게임이 개발되어 이동통신사를 통해 서비스되고 있는 실정이다. 대부분의 국내 중소규모CP들 역시 모바일 3D 게임 시장을 차기 수익원으로 판단, 시장에서의 미래가치와 업계 생존 전략 차원에서 3D 게임 개발을 준비하고 있으나, 아직은 2D 게임에 비해 상대적으로 많이 소요되는 개발기간과 비용, 개발 인력 및 정보 부족 등으로 곤란을 겪고 있다. 이에 본 논문에서는 이러한 상황에서의 어려움 극복을 모색하기 위해 모바일 환경에 최적화된 3D 게임 제작환경과 개발프로세스에 관하여 연구하였다.
Recently, Basic patterns with excellent body fitness and automation availability are required to be developed in order to automate the patterns of women's clothes. In this study, this reference points, reference lines and segments were fixed onto 3D scan data for the lower body the women in their twenties, they were directly spread out to be 2D flat pattern to facilitate development into the design of slacks adhered closely to the human body such as special and highly-functional clothes, and then slacks 2D pattern was developed for the purpose of seeking scientific approach to the development into basic form slacks and 3d emotional pattern. For conversion of 3D pattern into 2D flat pattern, reference points and segments were created by using Rapid Form of 3D shape analysis software, and triangle mesh of the body surface of the created shape was developed with Auto CAD 2005. The correspondence between slacks and human body was examined by the fixation of major reference lines. Specially, the wearing characteristics of slacks were considered by the fixation of side lines in consideration of posture. As a result of using the way of development to constantly maintain the length while 3D triangle mesh is converted into 2D flat mesh, the shape was shown to be excellently reproduced, and the area of flat pattern was increased compared to the shape of parting plane. Also, the sunk-in curve like the brief line of front crotch length needed a cutting line when it was closely adhered, when mesh was overlapped, and the pattern area was smaller compared to the actual shape.
D-type G1 cyclins are known to be crucial for the progression of mitotic cell cycle in mammals. Although many studies have been performed to elucidate the roles of D-type cyclins, it is largely unknown whether D-type cyclins are directly involved in the regulation of meiotic germ cell development. In the present study, we examined the expression patterns of D-type cyclins (cyclin D1 and D3) during male germ cell development by northern blot and in situ Hybridization analyses. In the adult testes, we detected a 4.2 kb cyclin D1 mRNA and two different sizes (2.3 kb and 1.8 kb) of cyclinD3 mRNAs. The short form of the cyclin D3 transcript was testis-specific. Along with the testicular development, expression of cyclin D3 mRNA was increased whereas cyclin D1 mRNA was gradually decreased. in situ hybridization study also revealed that the expression of cyclin D3 was restricted to the postmeiotic germ cells. Furthermore, the 2.3 kb transcript was highly expressed in the round spermatids and decreased in the elongated spermatids/residual bodies, while the 1.8 kb transcript was expressed in elongated spermatids/residual bodies more abundantly. Sucrose-gradient separation of polysomal RNA fractions demonstrated that some portions of the 2.3 kb transcript are translationally active, while the 1.8 kb transcript is likely to be inactive. Taken together, the present data suggest a functional importance of cyclin D3 expression in the differentiated postmeiotic male germ cells.
본 논문은 2D3D 영상데이터 변환 기술에 관한 특허를 조사, 분석하여 핵심 기술 개발 방향 및 지재권 획득 전략 수립을 제시한 것이다. 특허 동향을 살펴본 결과 2D to 3D 영상데이터 변환 기술은 계속 성장중인 단계라 할 수 있으며, 향후 발전 가능성이 많은 분야라 할 수 있다. 특허 동향 연구를 통해 전략적 특허맵을 형성한다면, 2D to 3D 영상데이터 변환 시장경쟁에서 앞서 나갈 수 있을 것이다.
With recent advances in 3D scanning technology, three-dimensional (3D) patternmaking is becoming a powerful way to develop garments pattern. This technology is now applicable to the made to measure (MTM) system of both ordinary and tightly fitting garments. Although the pattern of fitted clothing has been developed using 3D human data, it is still interesting to develop cycling pants by considering while-cycling body posture and fabric elasticity. This study adopted the Garland's triangle simplification method in order to simplify data without distorting the original 3D scan. Next, the Runge-Kutta method (2C-AN program) was used to develop a 2D pattern from the triangular pixels in the 3D scanned data. The 3D scanned data of four male, university students aged from 21 to 25, was obtained using Whole body scanner (Model WB4, Cyberware, Inc., USA). Results showed the average error of measurement was $4.58cm^2$ (0.19%) for area and 0~0.61cm for the length between the 3D body scanned data and the 2D developed pattern data. This is an acceptable range of error for garment manufacture. Additionally, the 2D pattern developed, based on the 3D body scanned data, did not need ease for comfort or ease of movement when cycling. This study thus provides insights into how garment patterns may be developed for ergonomic comfort in certain special environments.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.