• Journal of the Korean Society of Clothing and Textiles
• /
• v.44 no.2
• /
• pp.193-208
• /
• 2020

This study investigated similarities and differences between 2D flat sketch, 3D virtual clothing and real clothing images. Flat sketch, 3D virtual clothing, and real clothing images of T-shirts and dresses were made. Questionnaires were prepared for fit evaluation, sensory evaluation, and location evaluation. A survey of 440 questionnaires was collected from Chinese women in their 20s and 30s. As results of the sensibility evaluation, 3D virtual clothing expressed real clothing images slightly more similar than a 2D flat sketch. As results of the fit evaluation of the dresses, 2D flat sketch and 3D virtual clothing were rated as slightly longer/wider, and real clothing images were rated as slightly shorter/narrower. The results suggested that presenting 3D images with avatars as 3D virtual clothing images will provide more accurate fit evaluation results. This study presented possibilities and methods for apparel companies to utilize 3D system as an effective apparel production tool.

• Nutrition Research and Practice
• /
• v.7 no.6
• /
• pp.495-502
• /
• 2013

Recent studies suggest that vitamin D deficiency and cardiometabolic disorders are becoming increasingly more prevalent across multiple populations. However, there is a lack of comprehensive data for Korean adults. We investigated the vitamin D status, the prevalence of vitamin D deficiency and its association with metabolic syndrome (MS) risk in Korean adults aged 20 years or older. The study subjects (n = 18,305) were individuals who participated in the Korean National Health Examination and Nutrition Survey (KNHANES) in 2008-2010. Vitamin D status (25-hydroxyvitamin D [25(OH)D]) was categorized as < 20, 21-29, and ${\geq}$ 30 ng/mL, which are the cut-off points for deficiency, insufficiency and normal limits. A wide variety of cardiometabolic risk factors were compared according to the vitamin D status. Vitamin D deficiency was found in 53.9% of men and 70.5% of women. Mean BMI, systolic BP, HbA1c and low density lipoprotein cholesterol (LDL-C) were highest in the vitamin D deficiency group in both genders. Further, the MS was most prevalent in the vitamin D deficiency group in both genders (12.3%, P = 0.002 in men and 9.2%, P < 0.001 in women). Compared to the vitamin D normal group, the adjusted odds ratio (ORs) (95% confidence interval [95% CI]) for MS in the vitamin D deficiency group were 1.46 (1.05-2.02) in men and 1.60 (1.21-2.11) in women, after adjusting for confounding variables. In conclusion, Vitamin D deficiency is a very common health problem in Korean adults and is independently associated with the increasing risk of MS.

• The Korean Nurse
• /
• v.15 no.3 s.83
• /
• pp.44-50
• /
• 1976

From 13th of sept to 15th of Nov. in 1975 A Survey was Conducted to know the degree of knowledge and the attitudes for the V.D. and the situations of present life o 102 prostitutes registered to the V.D. Clinic Center Paju-gun. Kyung ki province, the conc

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2010.04a
• /
• pp.249-250
• /
• 2010

The study aims to propose a method that shall rapidly acquire 3D spatial information of the frequently changing city areas by using the low altitude aerial images taken by the UAV. The artificial 3D model of the artificial structures was constructed using the aerial image data photographed at the test area, calibration data of the non-metric camera and the results of the ground control point survey. Also, the digital surface model was created for areas that were changed due to a number of civil works. Through the above studies, the possibilities of constructing a 3D virtual city model, renewal of 3D GIS database, abstraction of changed information in geographic features and on-demand updating of the digital map were suggested.

• Journal of Multimedia Information System
• /
• v.9 no.3
• /
• pp.183-190
• /
• 2022

Image-based 3D object detection is one of the important and difficult problems in autonomous driving and robotics, and aims to find and represent the location, dimension and orientation of the object of interest. It generates three dimensional (3D) bounding boxes with only 2D images obtained from cameras, so there is no need for devices that provide accurate depth information such as LiDAR or Radar. Image-based methods can be divided into three main categories: monocular, stereo, and multi-view 3D object detection. In this paper, we investigate the recent state-of-the-art models of the above three categories. In the multi-view 3D object detection, which appeared together with the release of the new benchmark datasets, NuScenes and Waymo, we discuss the differences from the existing monocular and stereo methods. Also, we analyze their performance and discuss the advantages and disadvantages of them. Finally, we conclude the remaining challenges and a future direction in this field.

• Journal of Cadastre & Land InformatiX
• /
• v.50 no.1
• /
• pp.163-180
• /
• 2020

In this study, to build a spatial information infrastructure, which is a component of a smart city, a 3D digital twin model in the downtown area was built based on the latest spatial information acquisition technology, the drone. Several analysis models were implemented by utilizing. While the data processing time and quality of the three types of drone photogrammetry software are different, the accuracy of the construction model is ± 0.04 in the N direction and ± 0.03m in the E direction. In the m and Z directions, ± 0.02m was found to be less than 0.1m, which is defined as the allowable range of surveying performance and inspection performance for the boundary point in the area where the registration of the boundary point registration is executed. 1: 500 to 1 of the aerial survey work regulation: The standard deviation, which is the error limit of the photographic reference point of the 600 scale, appeared within 0.14 cm, and it was found that the error limit of the large scale specified in the cadastral and aerial survey was satisfied. In addition, in order to increase the usability of smart city realization using a drone-based 3D urban digital twin model, the model built in this study was used to implement Prospect right analysis, landscape analysis, Right of light analysis, patrol route analysis, and fire suppression simulation training. Compared to the existing aerial photographic survey method, it was judged that the accuracy of the naked eye reading point is more accurate (about 10cm) than the existing aerial photographic survey, and it is possible to reduce the construction cost compared to the existing aerial photographic survey at a construction area of about 30㎢ or less.

• Environmental and Resource Economics Review
• /
• v.13 no.3
• /
• pp.469-497
• /
• 2004

Environmental R&D management system has been analyzed with LCA method. Based on the analysis, we found the following four elements were essential for improving effciency of environmental R&D management system: establishment of an information clearinghouse that collects and distributes information on the status of the domestically owned environmental technology, Periodic survey of the environmental technology demand to give guidance in selecting the environmental R&D project that are to be subsidized, dissemination of information on the technology transfer and commercialization assistance program, and increased funding as well as the expansion of project categories eligible for R&D subsidy.

• Korean Journal of Agricultural Science
• /
• v.47 no.4
• /
• pp.727-742
• /
• 2020

Point cloud-based 3D maps can obtain many kinds of information for maintenance work on forest road networks. This study was conducted to compare the importance of each factor to select the factors required for the mapping of 3D forest road maps. This can be used as basic data for attribute information required to maintain forest road networks. The results of this study found that out of a total of 30 indexes extracted for mapping 3D forest roads, a total of 21 indexes related to stakeholder groups were significantly different. The importance of the index required by the civil service group was significantly higher than that of the other groups overall. In the case of the academic group, the index importance for cut slope, fill slope, and drainage facility was significantly higher. On the other hand, the index importance for the forestry cooperative and forest professional engineer group was mostly distributed between the civil servants' group and the academic group. In particular, the type of drainage system showed the highest value among the detailed indexes. Overall, drainage related factors in this survey had high coefficient values. The impact of water on forest roads was the most important part in road maintenance. In addition, the soil texture had a high value in relation to slope stability. This is thought to be because the texture of the soil affects the stability of the slope.

• Journal of Environmental Health Sciences
• /
• v.37 no.4
• /
• pp.258-266
• /
• 2011

Objectives: The aim of this study is to examine the possible changes over the past ten years in the estimated daily dietary lead intake (Pb-D) stemming from the variation of daily intake amounts for each food group. The following factors were considered; 1. time trends in Pb-D as the estimated values, 2. the time trend in Pb-D by food groups 3. the most influential food groups for dietary Pb intake. Methods: Estimated Pb-D was drawn from food consumption according to food groups reported in the Korean National Health and Nutrition Survey and the lead contents of each food group as reported in 23 prior publications. Results: The estimated Pb-D in a 2009 survey was 40.8 ${\mu}g/day$, of which 22.5 ${\mu}g/day$ (55.1%) was of plant origin and 18.3 ${\mu}g/day$ (44.9%) was of animal origin. Meats and poultry, fish and shellfish among foods of animal origin and beverages of plant origin had the largest contribution in Pb-D among the food groups. Conclusion: Over past ten years, daily lead intakes have slightly increased among men. Otherwise, no clear variation is apparent among women.

• Journal of Korean Society of Water and Wastewater
• /
• v.23 no.6
• /
• pp.789-797
• /
• 2009

The flow in the beginning lateral sewer can be characterized as intermittent and unsteady, and a moment maximum flow energy is required to transport fecal solids in the sewer. It is thus difficult to design to satisfy a minimum velocity criteria (0.6m/s), because of the substantially lower discharge in the beginning lateral sewer. This study is the result of a field survey, and aims to determine a design criteria for the minimum slope to prevent sediment in a lateral sewer. The survey performed on the two flat small catchments in Goyang-si consisting of D400mm hume-pipe, aimed to understand the manner in which the scope of a sewer slope has an effect on sediment in the beginning lateral sewer. The survey showed that the sewer slope below 3‰ had sedimentation of 88.7%, while the sewer slope of 3~6‰ had sedimentation of 47.8%. In addition, the minimum design slope was estimated to refer to the result of hydraulic experiments from Public Works Research Institute in Japan. Analysis showed that the D400mm hume pipe should be installed with a slope of 6.5‰ to prevent sediment in the beginning lateral sewer. For future installations, the study results showed that a D300mm plastic pipe requires a minimum slope of 3.5‰, and a D250mm plastic pipe requires a minimum slope of 3.3‰ in the beginning lateral sewer.