• Wind and Structures
• /
• 제38권4호
• /
• pp.261-275
• /
• 2024

Before performing an experimental study on the downburst-generated wave, it is necessary to examine the scale effects and corresponding corrections or compensations. Analysis of similarity is conducted to conclude the non-dimensional force ratios that account for the dynamic similarity in the interaction of downburst with wave between the prototype and the scale model, along with the corresponding scale factors. The fractional volume of fluid (VOF) method in association with the impinging jet model is employed to explore the characteristics of the downburst-generated wave numerically, and the validity of the proposed scaling method is verified. The study shows that the location of the maximum radial wind velocity in a downburst-wave field is a little higher than that identified in a downburst over the land, which might be attributed to the presence of the wave which changes the roughness of the underlying surface of the downburst. The impinging airflow would generate a concavity in the free surface of the water around the stagnation point of the downburst, with a diameter of about two times the jet diameter (D_jet). The maximum wave height appears at the location of 1.5D_jet from the stagnation point. Reynolds number has an insignificant influence on the scale effects, in accordance with the numerical investigation of the 30 scale models with the Reynolds number varying from 3.85 × 10⁴ to 7.30 × 10⁹. The ratio of the inertial force of air to the gravitational force of water, which is denoted by G, is found to be the most significant factor that would affect the interaction of downburst with wave. For the correction or compensation of the scale effects, fitting curves for the measures of the downburst-wave field (e.g., wind profile, significant wave height), along with the corresponding equations, are presented as a function of the parameter G.

• 헤리티지:역사와 과학
• /
• 제43권3호
• /
• pp.306-333
• /
• 2010

그동안 신라의 왕성이었던 월성에 대한 연구는 월성을 중심으로 한 도성제와 월성해자 발굴을 통한 월성 주변의 모습에 치중해 있었다. 그러나 2004년에 월성 지표조사보고서가 발간되고 시험적 성격으로서 GPR탐사가 월성 내에서 실시되면서 월성에 대한 학술적 관심은 성내부로 변화되었다. 다행히 경주 월성의 고고학적 기초학술 조사가 시작되고 사업의 일환으로 월성 전 지역에 대한 물리탐사를 2007년 3월부터 1년에 걸쳐 실시하게 되었다. 이번 조사의 기본 목적은 GPR탐사를 실시하여 시험탐사에서 확인된 매장유구를 월성 전체 지역에 대하여 영상화하는 것이다. 미리 설정한 격자망에 수많은 측선을 조밀하게 설치하여 3차원 GPR 탐사를 실시하였으며 총 조사면적은 $112,535m^2$이다. 분석은 Depth Slice를 실시하여 각 깊이별로 유구의 변화양상과 중복상황을 파악할 수 있도록 하였으며, Slice Overlay 분석법을 이용하여 각 깊이별 반사체를 하나의 도면으로 추출하였다. 또한 3차원 입체분석법인 Isolated Surface 영상화를 실시하여 유구 해석의 이해를 높였다. 그 결과 월성 내에서 총 14개의 구역으로 구분 지을 수 있는 크고 작은 건물지가 확인되었으며, 주목되는 곳은 월성의 서부(2구역), 중부(9구역), 동부(14구역)에 중요시설물일 것으로 짐작게 하는 대규모의 범상한 건물배치가 있는 3개의 구역이다. 본 연구결과를 통해서 3차원 GPR탐사는 광역적인 유적탐사에 매우 효과적이며 그 자료처리에 있어서 Slice Overlay 분석법은 지하 매장물에 대한 쉽고 뚜렷한 영상을 제공할 수 있음을 알 수 있었다.

• 한국축산식품학회지
• /
• 제38권5호
• /
• pp.1019-1028
• /
• 2018

The crust that inevitably forms on dry-aged beef is usually trimmed and discarded before sale. The aim of this study was to explore methods for utilizing this crust in processed meat products. Four sirloins were dry-aged for 28 d at $4^{\circ}C$ (75% relative humidity). The crust obtained from the surface of the sirloins after completion of dry aging was lyophilized. Patties were prepared without added crust (control) or with 5% w/w crust, aerobically packaged, and stored at $4^{\circ}C$ for 7 d. Electronic nose analysis indicated that the volatile profile differed significantly between the patties with and without crust. Compared to the control patties, patties containing crust had higher flavor, tenderness, juiciness, and acceptability scores in a sensory panel evaluation (all p<0.05). In addition, patties with crust were less hard, gummy, and chewy than the control patties after 3 and 7 d of storage (all p<0.05). The number of total aerobic bacteria was higher in raw patties with crust than in the control patties during the storage (p<0.05). However, no pathogens were detected. 2-Thiobarbituric acid reactive substance values of patties containing crust were significantly lower than those of control patties after 2 and 6 d of storage (both p<0.05). Thus, crust from dry-aged beef can enhance the flavor by providing beefy and palatable flavor without a long period of dry aging.

• 천문학회지
• /
• 제36권3호
• /
• pp.159-165
• /
• 2003

Optical (R) and near-infrared (K') images of the IRAS 1-Jy sample of 118 ultraluminous infrared galaxies have been studied. All but one object in the 1-Jy sample show signs of strong tidal interaction/merger. Most of them harbor a single disturbed nucleus and are therefore in the later stages of a merger event. Single-nucleus ULIGs show a broad distribution in host magnitudes with significant overlap with those of quasars. The same statement applies to R - K' colors in ULIG and quasar hosts. An analysis of the surface brightness profiles of the host galaxies in single-nucleus sources reveals that about $35\%$ of the Rand K' surface brightness profiles are well fit by an elliptical-like $R^{1/4}$-law, while only $2\%$ are well fit by an exponential disk. Another $38\%$ of the single-nucleus systems are fit equally well with an exponential or de Vaucouleurs profile. Elliptical-like hosts are most common among merger remnants with Seyfert 1 nuclei ($83\%$) and Seyfert 2 optical characteristics ($69\%$). The mean effective radius of these ULIGs is 4.80 $\pm$ 1.37 kpc at Rand 3.48 $\pm$ 1.39 kpc at K'. These values are in excellent agreement with recent quasar measurements obtained at H with HST. The hosts of elliptical-like 1-Jy systems follow with some scatter the same ${\mu}e - r_e$ relation, giving credence to the idea that some of these objects may eventually become elliptical galaxies if they get rid of their excess gas or transform this gas into stars.

• Ocean and Polar Research
• /
• 제32권4호
• /
• pp.439-448
• /
• 2010

CTD를 이용하여 용존산소의 농도에 대한 연속적인 관측이 이루어지면서 용존산소 농도 분포의 fine structure에 대한 연구가 가능해졌다. 뿐만 아니라 altimeter로부터 해저 퇴적물 표면에 최대한 가까이 까지 관측이 가능해짐에 따라 해저 경계면에서의 용존산소 농도 분포에 대한 정보를 얻을 수 있게 되었다. 지금까지 동해 울릉분지의 용존 산소 농도의 수직 분포는 동해 북부의 일본 분지와는 수심 300 m 이하에서는 수심에 따라 지속적으로 감소하는 형태를 보이는 것으로 알려져 있다. 그러나 2005년부터 2006년까지 6회에 걸쳐 수심이 1000 m보다 깊은 지역에서 해저퇴적물 상부 100 m 이내의 수심까지 용존산소를 관측한 결과, 울릉분지 내의 용존 산소 농도의 수직분포형태는 3가지로 분류된다. 첫 번째는 지금까지 알려진 바와 같이 수심에 따라 지속적으로 감소하는 형태(Type-1), 두 번째는 Type-1과 같은 형태를 보이다가 해저 경계면 근처에서 급격히 산소의 농도가 줄어드는 형태(Type-2), 세 번째는 해저 경계면 상층에 용존산소 농도의 최소층이 존재하는 형태(Type-3)이다. 울릉분지 수심 1000 m 이상되는 지역에서는 분지 전반에 걸쳐 Type-2 형태로 분포하고 Ulleung Interplane Gap을 포함하여 일본 분지와 가까운 지역에서는 Type-1, 독도 인근 해역에서는 Type-3 형태의 분포를 보인다. 표층 퇴적물에서 유기물 분해를 전제로 해저 경계면의 용존 산소 분포를 이용하여 계산된 표층 퇴적물의 산소 소모율은 $0.2{\sim}5.8\;mmol\;m^{-2}d^{-1}$로 실제 퇴적물 배양을 통해 얻은 산소 소모율 약 $1{\sim}9\;mmol\;m^{-2}d^{-1}$(정 등 2009; 이 등 2010b)와 일치하는 것으로 미루어 볼 때, 울릉분지의 전반에 걸쳐 Type-2와 같은 형태의 분포를 보이는 것은 울릉분지의 표층 퇴적물에서 높은 농도를 보이는 유기물의 분해가 일차적으로 중요한 역할을 하는 것으로 판단된다.

• Spatial Information Research
• /
• 제16권3호
• /
• pp.279-290
• /
• 2008

자연재해로 인한 수많은 피해 중 특히 산사태 등 사면붕괴로 인한 피해는 인간에게 많은 인적/물적 자원의 손실을 가져왔다. 이런 사면붕괴로 인한 피해를 줄이고자 사면붕괴 예방을 위해 다양한 계측장비를 이용하여 사면붕괴 예 경보 시스템을 구축하였다. 하지만 대상사면에 접근성 문제를 해결하고 위험 사면 전체에 대한 안전성 평가를 실시할 수 있는 효율적인 계측장비는 많지 않은 실정이다. 이에 사면붕괴예방을 위한 효율적인 계측장비로서 측량학적인 접근 방법으로 사면거동의 정확한 계측을 위해 지상라이다시스템을 이용하여 사면붕괴 예방을 위한 시스템의 활용가능성 판단을 위한 실험을 실시하였다. 본 연구에서는 인공으로 조성되어 사면안정화 공법이 적용된 토사사면에 사면상부에서 단계별로 실물 하중을 가하여 하중에 따른 사면의 거동을 Total Station과 지상라이다시스템을 이용하여 계측하였다. 두 시스템을 이용하여 계측한 성과의 정확한 비교 분석을 위해 두 시스템의 계측 결과를 동일한 좌표계로 일치시키는 3D Similarity Transformation을 통해 서로 다른 좌표계를 가지고 있는 두 좌표계를 하나의 좌표계로 통일시켜 사면이 실물하중에 어떤 거동이 일어나는지를 분석하였다. 타켓중심의 사면거동 분석결과, 지상라이다 시스템은 Total Station과 비교해 X축으로는 1cm이내의 차이가, Y축으로는 규칙적이지 않는 거동의 경향이 발생하고, Z축으로는 서로 유사한 경향을 보였다. 연속된 점에 대한 사면지동 분석결과, Y축의 위치에 따라 사면 하부에서 상부의 방향으로 사면거동의 경향이 다르게 나타나 Total Station에서 분석하기 어려웠던 사면의 연속적인 변화를 관찰할 수 있었다. 따라서 지상라이다 시스템은 Total Station에 버금가는 측량성과를 획득하여 효율적인 사면모니터링을 위한 계측장비로 판단되었으며 기존의 사면모니터링기법의 한계를 대체 할 수 있는 측량학적 분석방법으로 많은 활용이 기대된다.

• 상하수도학회지
• /
• 제26권6호
• /
• pp.767-777
• /
• 2012

Annular Biofilm Reactor (ABR) equipped with coupons of three different pipe materials (STS 304, PVC, PE) was used to generate drinking water biofilm samples. The level of assimilable organic carbon (AOC) during the sample generation period was $37.3{\mu}g/L$, and this level did not seem to be low enough to limit the formation of biofilm in this study. Terminal-restriction fragment length polymorphism (T-RFLP) analyses determined T-RF profile as early as 3 h of exposure on PVC coupons. Average surface roughness ($R_a$) measured by atomic force microscopic analyses was 125.7 nm for PVC, and this value was higher than for STS (71.6 nm) and PE (74.0 nm). However, biofilm formation was faster on STS (6 h) than on PE (12 h), which indicated that surface roughness might not be the only factor that controlled the initiation of biofilm development. Upon detection of the T-RF peaks, richness (S) and diversity indices such as Shannon (H) and Simpson (1/D) demonstrated a rather slow increase until 48 h followed by rapid increase regardless of the pipe materials. Differences of microbial community structures among the biofilm samples were determined based on the cluster analysis using Jaccard coefficients (Sj). Biofilm communities could be divided into two distinct groups according to the exposure time regardless of the pipe materials. First group contained a young (< 48 h) biofilm samples (10 out of 11) but second group contained a mature (${\geq}$ 48 h) samples (11 out of 14). Results suggested that, due to the complexity of biofilm, the targeting of the first group of cluster was crucial for optimizing the management of drinking water distribution systems and controlling microbial growth.

• Nuclear Engineering and Technology
• /
• 제45권5호
• /
• pp.613-624
• /
• 2013

Multi-dimensional two-phase phenomena occur in many industrial applications, particularly in a nuclear reactor during steady operation or a transient period. Appropriate modeling of complicated behavior induced by a multi-dimensional flow is important for the reactor safety analysis results. SPACE, a safety analysis code for thermal hydraulic systems which is currently being developed, was designed to have the capacity of multi-dimensional two-phase thermo-dynamic phenomena induced in the various phases of a nuclear system. To validate the performance of SPACE, a two-dimensional two-phase flow test was performed with slab geometry of the test section having a scale of $1.43m{\times}1.43m{\times}0.11m$. The test section has three inlet and three outlet nozzles on the bottom and top gap walls, respectively, and two outlet nozzles installed directly on the surface of the slab. Various kinds of two-dimensional air/water flows were simulated by selecting combinations of the inlet and outlet nozzles. In this study, two-dimensional two-phase void fraction profiles were quantified by measuring the local gap impedance at 225 points. The flow conditions cover various flow regimes by controlling the flow rate at the inlet boundary. For each selected inlet and outlet nozzle combination, the water flow rate ranged from 2 to 20 kg/s, and the air flow rate ranged from 2.0 to 20 g/s, which corresponds to 0.4 to 4 m/s and 0.2 to 2.3 m/s of the superficial liquid and gas velocities based on the inlet port area, respectively.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.438-443
• /
• 2005

Laser surface hardening is an effective technique used to improve the tribological properties and also to increase the service life of automobile components such as camshafts, crankshatfs, lorry brake drums and gears. High power CO2 lasers and Nd:YAG lasers are employed for localized hardening of materials and hence are of potential application in the automobile industries. The heat is conducted rapidly into the bulk of the specimen causing self-quenching to occur and the formation of martensitic structure. In this investigation, the microstructure features occurring in Nd:YAG laser hardening SM45C steel are discussed with the use of optical microscopic and scanning electron microscopic analysis. Moreover, This paper describes the optimism of the processing parameters for maximum hardened depth of SM45C steel specimens of 3mm thickness by using CW Nd:YAG laser. Travel speed was varied from 0.6m/min to 1.0m/min. The maximum hardness and case depth fo SM45C steel are 780Hv and 0.4mm by laser hardening.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 춘계학술대회 논문집
• /
• pp.87-90
• /
• 2004

In this paper, net-shape forming of an automobile gear is investigated. Barrel, a component of automobile start motor, is adopted as a net-shape forming. In order to accomplish the goal of net-shape forming without cutting of tooth and cam after forming, forming ability is raised through billet treatment and die design. As a technique of billet treatment spheroidizing annealing of billet to get low hardness and molybdenum disulphide coating to get low contact friction between billet and die is carried out. One of critical points of die design, fillet radii variation of tooth of die is applied to get smooth surface of barrel after cold forging. As a measurement of tooth accuracy, distance between two pins and lead-tooth alignments are investigated. Cam profile accuracy is checked with a 3D measuring instrument. Results obtained from the tests revealed reasonable result with respect to design goal. By these results, the paper shows that reasonable results can be obtained by billet treatment and die design for net-shape forming.