• Geomechanics and Engineering
• /
• v.17 no.6
• /
• pp.583-595
• /
• 2019

In this paper, a comprehensive investigation of the dynamic response of a long-bridge subjected to spatially varying earthquake ground motions (SVEGM) is performed based on a proposed analytical model which includes the effect of soil-structure interaction (SSI). The spatial variability of ground motions is simulated by the powerful record generator, SIMQKE II. Modeling of the SSI in the system is simplified by replacing the pile foundations and soil with sets of independent equivalent linear springs and dashpots along the pile groups. One of the most fundamental objectives of this study is to examine how well the proposed model simulates the dynamic response of a bridge system. For this purpose, the baseline data required for the evaluation process is derived from analyzing a 3D numerical model of the bridge system which is validated in this paper. To emphasize the importance of the SVEGM and SSI, bridge responses are also determined for the uniform ground motion and fixed base cases. This study proposing a compatible analytical model concerns the relative importance of the SSI and SVEGM and shows that these effects cannot be neglected in the seismic analysis of long-bridges.

• International Journal of Advanced Culture Technology
• /
• v.6 no.4
• /
• pp.52-57
• /
• 2018

The purpose of this paper is to develop simulations that can be used for virtual education in dentistry. The virtual education to be developed will be developed with clinical training and actual case data of tooth extraction. This development goal is to allow dental students to learn the necessary surgical techniques at the point of their choice, not going into the operating room, away from time, space, and physical limits. I want to develop content using VR. Oculus Rift HMD, Optical Based Outside-in Tracking System, Oculus Touch Motion Controller, and Headset as Input / Output Device. In this configuration, the optimization method is applied convergent, and when the operation of the VR contents is performed, the content data is extracted from the interaction analysis formed in the VR engine, and the data is processed by the content algorithm. It also computes events and dental operations generated within the 3D engine programming and generates corresponding events through data processing according to the input signal. The visualization information is output to the HMD using the rendering information. In addition, the operating room environment was constructed by studying lighting and material for actual operating room environment. We applied the ratio of actual space to virtual space and the ratio between character and actual person to create a spatial composition at a similar rate to actual space.

• Journal of the Korean Institute of Rural Architecture
• /
• v.17 no.4
• /
• pp.49-56
• /
• 2015

This study aims to identify variables (dependent and independent variables) by plane type and area, focusing on the R.C structure planes which were applied to the National Rental Housing Complexes during the 1970-80s; and to investigate differences in residential space compositions depending on the interrelationship between the variables. The results of this study can be summarized as follows: First, an independent variable which had the most influence on the residential space composition was found to be stairs. As dependent variables, bedroom, livingroom, and kitchen showed difference in spatial arrangements. Second, in the case of the front entry type, one-sided arrangements were the most common for the 3L+D.K composition, because livingroom was arranged near the stairs, Disadvantages were: (1) the spatial division of each room was not efficient; and (2) the use of room space was low due to long access to each room. Third, in the case of the rear entry type, no problem was found in arranging bedrooms on the front side. By arranging livingroom as a common space area, the distance of approachability to each room was found to be short and the use of space was excellent. However, disadvantages were: (1) stability was lacking; and (2) privacy was low. Fourth, depending on the location of the stairs, an interaction between bedrooms and the connectivity between livingroom and kitchen were found. Accordingly, there were differences in the size and arrangement of space by plane type.

• Nuclear Medicine and Molecular Imaging
• /
• v.42 no.2
• /
• pp.98-111
• /
• 2008

This review introduces advances in clinical and pre-clinical single photon emission computed tomography (SPECT) and positron emission tomography (PET) providing noninvasive functional images of biological processes. Development of new collimation techniques such as multi-pinhole and slit-slat collimators permits the improvement of system spatial resolution and sensitivity of SPECT. Application specific SPECT systems using smaller and compact solid-state detector have been customized for myocardial perfusion imaging with higher performance. Combined SPECT/CT providing improved diagnostic and functional capabilities has been introduced. Advances in PET and CT instrumentation have been incorporated in the PET/CT design that provide the metabolic information from PET superimposed on the anatomic information from CT. Improvements in the sensitivity of PET have achieved by the fully 3D acquisition with no septa and the extension of axial field-of-view. With the development of faster scintillation crystals and electronics, time-of-flight (TOF) PET is now commercially available allowing the increase in the signal-to-noise ratio by incorporation of TOF information into the PET reconstruction process. Hybrid PET/SPECT/CT systems has become commercially available for molecular imaging in small animal models. The pre-clinical systems have improved spatial resolution using depth-of-interaction measurement and new collimators. The recent works on solid state detector and dual modality nuclear medicine instrumentations incorporating MRI and optical imagers will also be discussed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.2
• /
• pp.1426-1433
• /
• 2015

CCTV-applied monitoring is an effective measure to suppress potential crimes and record objective relationship; however, there is no methodology that can quantitatively compare and assess the afore-mentioned effects. Thus, this study intended to construct the methodology and analysis application that can measure the changes in the space-corresponding performance of CCTVs depending on installation measures by using 3-dimenstional virtual simulation technology. For analysis, the raster-based Isovist theory was 3-dimensionally expanded and the amount of incident sight line to each point was accumulated. At the same time, the amount of overlapped monitoring in the CCTV cameras that were connected to each measurement node was accumulated for cross-analysis. By applying the examples and analyzing the results, it was possible to construct an analysis application in use of collision detection model and quantify the changes of monitoring performance depending on positioning alternative of the cameras. Moreover, it enabled intuitive review and supplementation by reproducing visible shadow areas in a graph.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.9
• /
• pp.3372-3376
• /
• 2011

We have studied the relative stability and atomic structures of five $C_{20}X_2$ regioisomers obtained as diadducts of a $C_{20}$ cage (X = H, F, Cl, Br, and OH). All the regioisomers are geometric isomers, i.e., they differ in their spatial arrangement. Full-geometry optimizations of the regioisomers have been performed using the hybrid density-functional (B3LYP/6-31G(d, p)) method. Our results suggest that the cis-1 regioisomer (the 1,2-diadduct) is the most stable and that the second most stable is the trans-2 (1,13-diadduct) regioisomer, implying that the long-range interaction between the two adducts and the resonance effect are more pronounced than the diadduct-induced strain in the $C_{20}$ cage. The HOMO and LUMO characteristics of each regioisomer with the same symmetry of structural regioisomers except $C_{20}(OH)_2$ are topologically same. This suggests that by using an entirely different set of characteristic chemical reactions for each regioisomer, we can distinguish between the five regioisomers for each $C_{20}$ diadduct derivative.

• Korean Institute of Interior Design Journal
• /
• v.26 no.4
• /
• pp.30-41
• /
• 2017

Sunlight is perceived by human beings first through the epidermis to space, and is a non - material medium that provides physical awareness of space, diversified expression of spaces, and plenty experience. The purpose of this study is to investigate the characteristics of active building skin based on the inflow of natural light required by humans, looked through among the works of Jacques Herzog & Pierre de Meuron, which show the characteristics of active building skin, TEA(Tenerife Espacio de las Artes, 2008), Messe Basel New Hall (2013) and Elbphilharmonie (2016). First, the interaction between Sunlight and space is divided into spatial characteristics and sensitivities according to their concepts, properties, and characteristics. The characteristics of active skin by light are classified into a physical approach and a constructive approach. Second, (El Croquis 152/153) and analyzed the images, detail drawings, and elevations, and simulated them in 3D to express the relationship between light and active building skin. Third, the changes of light intensity, light color, and distribution of light according to the time of light entering and the skin are determined from 6:00 am to 6:00 pm. Fourth, the images taken from January 30th to February 7th, 2017 on the site were compared with the computer simulated images, and the relationship between active skin and light was compared. This study is to recognize the existence and necessity of light required for human being through the activated epidermis differentiated from the limited or closed epidermis focused on information transmission, I would like to emphasize that I would like to take a step closer to the necessity and possibility of new attempts and developments so that I can feel the various experiential spaces by.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.33 no.1
• /
• pp.1-12
• /
• 2021

To investigate the effect of freshwater discharge on the seawater circulation in the semi-closed harbor, a 3-D hydrodynamic model was applied to the International Ferry Terminal (IFT). The model run is conducted for 45 days (from May 15 to June 30, 2020), and the reproducibility of the model for time-spatial variability of current velocity and salinity was verified by comparison with model results and observation data. There are two sources of freshwater towards inside of the IFT: Han River and water reservoir located in the eastern part of IFT. In residual current velocity results, the two-layer circulation (the seaward flow near surface and the landward flow near bottom)derived from the horizontal salinity gradient in only considering the discharge from a Han River is more developed than that considering both the Han River and water reservoir. This suggests that the impact of freshwater from the reservoir is greater in the IFT areas than that from a Han River. Additionally, the two-layer circulation is stronger in the IFT located in southern part than Incheon South Port located in northern part. This process is formed by the interaction between tidal current propagating into the port and freshwater discharge from a water reservoir, and flow with a low salinity (near 0 psu) is delivered into the IFT. This low salinity distribution reinforces the horizontal stratification in front of the IFT, and maintains a two-layer circulation. Therefore, local sources of freshwater input are considered to estimate for mass transport process associated with the seawater circulation within the harbor and It is necessary to perform a numerical model according to the real-time freshwater flow rate discharged.