• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.19 no.5
• /
• pp.11-17
• /
• 2016

The purposes of this research are to estimate area of greenable roof and to monitor maintaining of green roofs using World-View 2 images. The contents of this research are development of World-View 2 application technologies for estimation of green roof area and development of monitoring and maintaining of green roofs using World-View 2 images. The available green roof areas in Gwangjin-gu Seoul, a case for this study, were estimated using digital maps and World-View 2 images. The available green roof area is approximately 12.17% ($2,153,700m^2$) of the total area, and the roof vegetation accounts for 0.46% ($80,660m^2$) of the total area. For verification of the extracted roof vegetation, Vworld 3D Desktop map service was applied. The study results may be used as a decision-making tool by the government and local governments in determining the feasibility of green roof projects. In addition, the project implementer may periodically monitor to see whether roof greening has maintained for efficient management of projects, and a vast amount of World-View 2 images may be regularly used before and after the projects to contribute to sharing of satellite images information.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.5
• /
• pp.585-597
• /
• 2009

This research aims to develop a registration method to remove the geometric inconsistency between aerial images and LIDAR data acquired from an airborne multi-sensor system. The proposed method mainly includes registration primitives extraction, correspondence establishment, and EOP(Exterior Orientation Parameters) adjustment. As the registration primitives, we extracts planar patches and intersection edges from the LIDAR data and object points and linking edges from the aerial images. The extracted primitives are then categorized into horizontal and vertical ones; and their correspondences are established. These correspondent pairs are incorporated as stochastic constraints into the bundle block adjustment, which finally precisely adjusts the exterior orientation parameters of the images. According to the experimental results from the application of the proposed method to real data, we found that the attitude parameters of EOPs were meaningfully adjusted and the geometric inconsistency of the primitives used for the adjustment is reduced from 2 m to 2 cm before and after the registration. Hence, the results of this research can contribute to data fusion for the high quality 3D spatial information.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2010.06a
• /
• pp.149-152
• /
• 2010

본 논문은 지구공간에 존재하는 다양한 공간정보를 이용하여 도로 및 철도 계획과 공사를 위한 최적노선을 선정하는 기법에 관한 새로운 연구이다. 사람과 물자를 수송하는데 있어서 가장 기본적인 공공교통시설인 도로 및 철도를 건설하기 위하여 초기에 가장 중요한 결정이 바로 최적노선결정이므로 환경파괴를 최대한으로 감소시키고 그 기능을 충분히 발휘할 수 있도록 대상 지역의 여러 가지 조건을 고려하여 가장 적합한 노선의 위치를 결정하여야 한다. 3차원 지형 환경의 공간영상콘텐츠는 국토계획 및 통신설비계획, 철도건설, 시공, 입체적인 유비쿼터스 도시 구현, 안전 및 방재 등에서 많은 요구와 그 중요성이 크게 부각되고 있다. 현재 지리정보 기반의 2차원적인 지도정보와 시설정보를 다차원의 도시공간으로 재현하기 위하여 기존의 등고선을 이용한 DEM 방식은 많은 한계를 가지고 있으며, 특히, 철도와 같은 노선 폭이 좁고 길이가 길어서 궤적 관리가 어려운 작은 구조물의 경우에는 그 고도모델이 무시되기 쉬우므로, 레이저 측량 기술을 이용한 공간대상물에 대한 높은 정확도 취득이 크게 필요한 실정이다. 본 연구에서는 원격탐사 영상 Data를 중심으로 하는 정사보정하고 이에 매칭 할 수 있는 수치 지도 벡터와의 통합 및 전환으로 다차원 공간에서 건물 모델의 생성과 다양한 활용을 제시하는 것을 연구목적으로 하였고, 연구방법으로는 기존의 이미 취득한 2차원적인 평면사진을 지상 기준점에 의하여 정밀기하보정을 하여 얻은 사진영상자료를 이용하여 3차원 공간정보로 구성하기 위해서는 동일지역에 대한 수준 측량결과인 높이 데이터를 매칭하여야 하므로, 항공기에 탑재한 센서로 모든 대상지에 대한 지형지물의 고밀도의 높이 값을 획득하여 위치보정 작업 후에 3D로 매칭할 수는 방법을 연구하여 실험하도록 하였다 또한 본 연구에서는 연구대상지역의 지형조건, 기존 노선과의 비교, 토지이용, 지형경사, 사면방향, 지가 등을 분석하여 각각의 경중률을 고려한 후 선택된 후보노선들을 비교분석함으로서 최적노선을 선정하고자 하였다.

• Ocean Science Journal
• /
• v.40 no.2
• /
• pp.67-78
• /
• 2005

Complex physical, chemical and biological interactions off the Korean coast created several striking patterns in the phytoplankton blooms, which became conspicuous during the measurements of ocean color from space. This study concentrated on analyzing the spatial and temporal aspects of phytoplankton chlorophyll variability in these areas using an integrated dataset from a Sea-viewing Wide Field-of-view Sensor (SeaWiFS), Advanced Very High Resolution (AVHRR) sensor, and Conductivity Temperature Depth (CTD) sensor. The results showed that chlorophyll concentrations were elevated in coastal and open ocean regions, with strong summer and fall blooms, which appeared to spread out in most of the enclosed bays and neighboring waters due to certain oceanographic processes. The chlorophyll concentration was observed to range between 3 and $54\;mg\;m^{-3}$ inside Jin-hae Bay and adjacent coastal bays and 0.5 and $8\;mg\;m^{-3}$ in the southeast sea offshore waters, this gradual decrease towards oceanic waters suggested physical transports of phytoplankton blooms from the shallow shelves to slope waters through the influence of the Tsushima Warm Current (TWC) along the Tsushima Strait. Horizontal distribution of potential temperature $(\theta)$ and salinity (S) of water off the southeastern coast exhibited cold and low saline surface water $(\theta and warm and high saline subsurface water $({\theta}>12^{\circ}C; S>34.4)$ at 75dBar, corroborating TWC intrusion along the Tsushima Strait. An eastward branch of this current was called the East Korean Warm Current (EKWC), tracked with the help of CTD data and satellite-derived sea surface temperature, which often influenced the dynamics of mesoscale anticyclonic eddy fields off the Korean east coast during the summer season. The process of such mesoscale anticyclonic eddy features might have produced interior upwelling that could have shoaled and steepened the nutricline, enhancing phytoplankton population by advection or diffusion of nutrients in the vicinity of Ulleungdo in the East Sea.

• Journal of Korean Society for Atmospheric Environment
• /
• v.11 no.E
• /
• pp.55-62
• /
• 1995

The distribution of airborne mercury was investigated from several districts of Seoul, five other major cities and two rural areas during the period April, 1994 to March, 1995. The method used in this study involves absorption of gaseous mercury on CHromosorb$^R$ A coated with gold and detection by cold vapor atomic absorption spectroscopy. The atmospheric mercury concentrations in Seoul ranged from N.D. to 120.17 ng m$^3$ (mean 27.01 $\pm 9.42 ng m^{-3}, N=139$), while those in rural areas ranged from 1.72 to 8.24 ng $m^{-3} (mean 4.57 \pm 3.07 ng m^{-3}, N=5$). The spatial distribution characteristics of mercury distribution in urban air were examined by comparing mercury levels as a function of the distance from the urban center. Temporal distribution trends of airborne mercury were also studied using the monthly mean mercury data of various districts in Seoul. The atmospheric mercury concentration around Mokdong wastes incinerator in Seoul were also investigated.

• Korean Journal of Remote Sensing
• /
• v.35 no.6_2
• /
• pp.1107-1115
• /
• 2019

Satellite data play a major role in supporting knowledge about forest fire by delivering rapid information to map areas damaged. This study, we used 7 Sentinel-2A images to detect change area in forests of Sokcho on April 4, 2019. The process of classify forest fire severity used 7 levels from Sentinel-2A dNBR(differenced Normalized Burn Ratio). In the process of classifying forest fire damage areas, the study selected three areas with high regrowth of vegetation level and conducted a detailed spatial analysis of the areas concerned. The results of dNBR analysis, regrowth of coniferous forest was greater than broad-leaf forest, but NDVI showed the lowest level of vegetation. This is the error of dNBR classification of dNBR. The results of dNBR time series, an area of forest fire damage decreased to a large extent between April 20th and May 3rd. This is an example of the regrowth by developing rare-plants and recovering broad-leaf plants vegetation. The results showed that change area was detected through the change detection of danage area by forest category and the classification errors of the coniferous forest were reached through the comparison of NDVI and dNBR. Therefore, the need to improve the precision Korean forest fire damage rating table accompanied by field investigations was suggested during the image classification process through dNBR.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.9
• /
• pp.355-361
• /
• 2018

Mining is important as a national key industry that supplies energy and raw materials that are the basis for industrial development. On the other hand, mine development is necessarily accompanied by mineralization, for example, ground subsidence, heavy metal pollution, and water pollution. The mine hazard has a large range of damage, and it takes much time and cost to recover. In addition, there is a need for systematic mining management in order to prevent damages from occurring continuously. In this study, the present status of domestic mining industry and geospatial information construction technology for mining management were investigated. 95% of the mines surveyed were nonmetallic, and limestone mines accounted for 67%, and the constructed mine spatial information is not constructed with 3D geospatial information due to 2D current status, section, and geological map. Considering the results of the survey and analysis of 3D laser scanner and characteristics of Korean mine, handheld scanner is considered to be the most suitable method for constructing mine geospatial information. In addition, the data acquired through the 3D laser scanner can effectively visualize the object, and it can contribute to the systematic management of mining because it can be used for various purposes such as generation of drawings and calculation of volume.

• Journal of the Korea Computer Graphics Society
• /
• v.19 no.2
• /
• pp.1-8
• /
• 2013

Captured human motion data has been widely utilized for understanding the mechanism of human motion and synthesizing the animation of virtual characters. Searching for desired motions from given motion data is an important prerequisite of analyzing and editing those selected motions. This paper presents a new method of content-based motion retrieval without the need of additional metadata such as keywords. While existing search methods have focused on skeletal configurations of body pose or planar trajectories of locomotion, our method receives a three-dimensional trajectory as its input query and retrieves a set of motion intervals in which the trajectories of body parts such as hands, foods, and pelvis are similar to the input trajectory. In order to allow the user to intuitively sketch spatial trajectories, we used the Leap Motion controller that can precisely trace finger movements as the input device for our experiments. We have evaluated the effectiveness of our approach by conducting a user study in which the users search for dozens of pre-selected motions from baseketball motion data including a variety of moves such as dribbling and shooting.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.3
• /
• pp.191-204
• /
• 2014

In recent years, multi-camera systems have been recognized as an affordable alternative for the collection of 3D spatial data from physical surfaces. The collected data can be applied for different mapping(e.g., mobile mapping and mapping inaccessible locations)or metrology applications (e.g., industrial, biomedical, and architectural). In order to fully exploit the potential accuracy of these systems and ensure successful manipulation of the involved cameras, a careful system calibration should be performed prior to the data collection procedure. The calibration of a multi-camera system is accomplished when the individual cameras are calibrated and the geometric relationships among the different system components are defined. In this paper, a new single-step approach is introduced for the calibration of a multi-camera system (i.e., individual camera calibration and estimation of the lever-arm and boresight angles among the system components). In this approach, one of the cameras is set as the reference camera and the system mounting parameters are defined relative to that reference camera. The proposed approach is easy to implement and computationally efficient. The major advantage of this method, when compared to available multi-camera system calibration approaches, is the flexibility of being applied for either directly or indirectly geo-referenced multi-camera systems. The feasibility of the proposed approach is verified through experimental results using real data collected by a newly-developed indirectly geo-referenced multi-camera system.

• Journal of the Korea Computer Graphics Society
• /
• v.21 no.2
• /
• pp.11-20
• /
• 2015

We present a new interactive technique for directing the motion sequences of an animated character by dragging its specific body part to a desired location in the three-dimensional virtual environment via a hand motion tracking device. The motion sequences of our character is synthesized by reordering subsequences of captured motion data based on a well-known graph representation. For each new input location, our system samples the space of possible future states by unrolling the graph into a spatial search tree, and retrieves one of the states at which the dragged body part of the character gets closer to the input location. We minimize the difference between each pair of successively retrieved states, so that the user is able to anticipate which states will be found by varying the input location, and resultantly, to quickly reach the desired states. The usefulness of our method is demonstrated through experiments with breakdance, boxing, and basketball motion data.