• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.37 no.1
• /
• pp.55-63
• /
• 2000

This paper investigated the sub-region compression effect of the three dimensional DCT(3D-DCT) using the difference component(DC) of inter-frame in images. The proposed algorithm are the method that obtain compression effect to divide the information into subband after 3D-DCT, the data appear the type of cubic block(8${\times}$8${\times}$8) in eight difference components per unit. In the frequence domain that transform the eight differential component frames into eight DCT frames with components of both spatial and temporal frequencies of inter-frame, the image data are divided into frame component(8${\times}$8 block) of time-axis direction into 4${\times}$4 sub block in order to effectively obtain compression data because image components are concentrate in corner region with low-frequency of cubic block. Here, using the weight of sub block, we progressed compression ratio as consider to adaptive sub-region of low frequency part. In simulation, we estimated compression ratio, reconstructed image resolution(PSNR) with the simpler image and the complex image contained the higher frequency component. In the result, we could obtain the high compression effect of 30.36dB(average value in the complex-image) and 34.75dB(average value in the simple-image) in compression range of 0.04~0.05bpp.

• Korean Journal of Remote Sensing
• /
• v.31 no.3
• /
• pp.215-226
• /
• 2015

Normally, aero photography using UAV uses about 430 MHz bandwidth radio frequency (RF) modem and navigates and remotely controls through the connection between UAV and ground control system. When using the exhausting method, it has communication range of 1-2 km with frequent cross line and since wireless communication sends information using radio wave as a carrier, it has 10 mW of signal strength limitation which gave restraints on life my distance communication. The purpose of research is to use communication technologies such as long-term evolution (LTE) of smart camera, Bluetooth, Wi-Fi and other communication modules and cameras that can transfer data to design and develop automatic shooting system that acquires images to UAV at the necessary locations. We conclude that the android based UAV filming and communication module system can not only film images with just one smart camera but also connects UAV system and ground control system together and also able to obtain real-time 3D location information and 3D position information using UAV system, GPS, a gyroscope, an accelerometer, and magnetic measuring sensor which will allow us to use real-time position of the UAV and correction work through aerial triangulation.

• Journal of Korean Society for Geospatial Information Science
• /
• v.23 no.1
• /
• pp.129-135
• /
• 2015

The Ubiquitous City (U-City) spatial information technology aimed to provide services freely anytime and anywhere by converging high-tech information & communication technology in urban infrastructure has been available in diverse patterns. In particular, there have been studies on the development of 3D spatial information after selecting and matching key points with stereo images from the many Closed Circuit TV (CCTV) in the U-City. However, the data mostly used in extracting matching points haven't considered external environmental impacts such as illuminance. This study tested how much the matching points needed to construct 3D spatial information with the CCTV whose image quality is dependent upon changes in illuminance fluctuate under the same hardware performances. According to analysis on the number of matching points by illuminance, the number of matching points increased up to 3,000Lux in proportion to the illuminance when IRIS, shutter speed and ISO were fixed. In addition, a border between an object and background became more distinctive. When there was too much light, however, the page became brighter, and noise occurred. Furthermore, it was difficult to name key points because of the collapse of an inter-object border. It appears that if filmed with the study results, the number of matching points would increase.

• The KIPS Transactions:PartD
• /
• v.14D no.6
• /
• pp.623-632
• /
• 2007

GML is a markup language presented as exchange standard for geographic information by the OGC(Open GIS Consortium). In spatial network databases, researches for supporting GML(Geographic Markup Language) can be divided into the parsing, the storing and the retrieval of GML documents. Among them, the study on the storage of GML documents is essential for their efficient retrieval. However there is little research on the storing of GML documents whereas there have been a lot of researches on the storing of n documents. Because the storage schema designed for XML documents are not appropriate for geographic information, we, in this paper, propose three storage schema for efficiently storing GML documents including geographic information in order to solve the problem that the XML storage schema store duplicate data and need to search many tables for obtaining elements. In addition, we design and implement a low-level storage manager which can store GML documents using the proposed GML storage schema.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.3
• /
• pp.647-653
• /
• 2016

Recently, the data image processing has been applied to a variety of fields including broadcasting, communication, computer graphics, medicine, and so on. Generally, the image data may develop the noise during their transmission. Therefore, the studies have been actively conducted to remove the noise on the image. There are diverse types of noise on the image including salt and pepper noise, AWGN, and mixed noise. Hence, the filter algorithm for the image recovery was proposed that salt and pepper noise was processed by histogram and spatial weighted values after defining the noise to lessen the impact of mixed noise added in the image, and AWGN was processed by the pixel information of local mask establishing the weighted values in this study. Regarding the processed results by applying Lena images which were corrupted by salt and pepper noise(P=50%) and AWGN(${\sigma}=10$), suggested algorithm showed the improvement by 7.06[dB], 10.90[dB], 5.97[dB] respectively compared with the existing CWMF, A-TMF, AWMF.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2006.04a
• /
• pp.411-417
• /
• 2006

As NGIS project has been implemented in 1995 and effectiveness of spatial information increased, Digital maps serve several purpose in administrative, living, and industrial fields. But, Digital maps have many differences with real world information and difficulties in application of managing urban facilities due to high update cost and long generation period. In this study, We suggest methodology to update a building layer of digital map in urban area as regenerating a building layer by detection of changed buildings in the existing digital map anf extraction using LIDAR data and Aerial images, more easier to acquire data and available to guarantee accuracy. Experimental results are expected to applied for constructing 3D urban model in a broad expensive urban area.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.144-146
• /
• 2003

Techniques for rock slope management and assessment must be developed for the prevention and mitigation of rock fall hazards. To enable this, the rock discontinuity such as fault and joint data must be surveyed, analysed and managed. For this, the discontinuities were detected by automatic and semi-automatic method using DEM and ortho-rectified image of rock slope and the rock slope analysis and management system was developed using GIS. Using the system, slope locations and discontinuities data were constructed to spatial database. The system is consist of ‘Data Management’, ‘Rock Slope DB’, ‘Basic Information’, ‘Image Processing’, ‘Image Analys ing’, ‘Edit’, ‘View’, ‘Theme’, ‘Graphic’, ‘Window’ and ‘Help’. The system was developed using avenue of ArcView 3.2.

• International journal of advanced smart convergence
• /
• v.7 no.4
• /
• pp.114-120
• /
• 2018

The purpose of this paper is to develop simulations that can be used for virtual education in dentistry. This development goal is to allow dental students to learn the necessary surgical techniques at the point of their choice, not going into the operating room, away from time, space, and physical limits. In this paper configuration, the optimization method is applied convergent, and when the operation of the VR contents is performed, the content data is extracted from the interaction analysis formed in the VR engine, and the data is processed by the content algorithm. It also computes events and dental operations generated within the 3D engine programming and generates corresponding events through data processing according to the input signal. The visualization information is output to the HMD using the rendering information. In addition, the operating room environment was constructed by studying lighting and material for actual operating room environment. We applied the ratio of actual space to virtual space and the ratio between character and actual person to create a spatial composition at a similar rate to actual space.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.3D
• /
• pp.541-547
• /
• 2006

With the new paradigm of ubiquitous in the developed computing technology, it is urgently necessary to research GIS fields centering around positioning techniques. The intention of this study is to propose implementation methods for integrating topographic and cadastral data. For this purpose an integrated data model is formed to coincide the graphic data of cadastral map with that of topographic map. As a result, the integrated data model could be built by harmonizing cadastral map with topographic map. We suggest data model for connecting with other information systems in the conditions of data uniformity and implementation. This data implementation models suggested in this research can provide a good reference for the future implementation of other systems. This results will be efficiently used as basis for practical use in ubiquitous environments of spatial informations.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.322-325
• /
• 2004

Recently the domestic technologies to manage forest and to control all related information were developed very rapidly by integrating FGIS (Forest Geographic Information System) and IT (Information technology). However, there still exists a mapping problem for example when overlaying a topography maps scaled in 1/5,000 to a forest type map scaled in 1/25.000. Moreover, there is a greater need to introduce the advanced spatial technologies such as high-resolution satellite image such as IKONOS and GIS to forest. In this study, 3D high-resolution forest mapping system was developed to possibly overlay with all kinds of scale maps and provide the all detailed information by using high-resolution satellite image and GIS. Through this system, all related forest officials could have and maintain the data consistency for their job and share the standard forest database with other post.