• International Journal of Precision Engineering and Manufacturing
• /
• 제9권4호
• /
• pp.16-21
• /
• 2008

The demand for three-dimensional (3D) shape measurements is increasing in a variety of fields, including the manufacture of molds and dies. The most popular technology for 3D shape measurement is the coordinate measuring machine (CMM) with a contact trigger probe. Although a CMM provides a high degree of accuracy, it is inefficient due to its long measuring time. It also has difficulty measuring soft objects that can be deformed by the touch of the contact probe. In addition, a CMM cannot digitize areas that are difficult to reach, and cannot capture very minute details on the surface of complex parts. For these reasons, optical non-contact measurement techniques are receiving more attention since they eliminate most of the problems associated with contact methods. Laser scanning is emerging as one of the more promising non-contact measurement techniques. This paper describes various acquisition considerations for laser scanning, including the accuracy of the 3D scan data, which depends on the charge-coupled device (CCD) gain and noise. The CCD gain and noise of a 3D laser scanner are varied while keeping the other conditions constant, and the measurement results are compared to the dimensions of a standard model. The experimental results show that a considerable time savings and an optimum degree of accuracy are possible by selecting the proper CCD gain and noise.

• 대한전자공학회논문지SP
• /
• 제48권6호
• /
• pp.27-34
• /
• 2011

본 논문에서는 스마트폰 단말기에 장착되어있는 카메라와 플래시를 이용한 photometric stereo 기반의 능동적 3차원 형상 취득 기법을 제안한다. 조명의 위치 변화에 따라 여러 장의 입력 영상을 취득하기 위헤 고정된 위치에서 영상을 취득하는 스마트폰 한 대와 위치를 변화시키며 조명을 투사하는 스마트폰 한 대를 이용하여 시스템을 구성한다. 우선 카메라 렌즈의 왜곡과 카메라 센서의 비선형성 반응함수에 의한 3차원 형상 취득의 오차를 줄이기 위해 카메라 보정을 수행한다. 또한 스마트폰 카메라간의 자세를 추정하기 위해 5-point 알고리즘을 적용한 후 이를 이용하여 광원의 방향 벡터를 추정한다. 그 후 취득된 영상과 추정된 광원의 방향 벡터를 이용하여 photometric stereo기법으로 3차원 형상을 취득한다. 실험결과 본 논문에서 제안하는 기법을 통하여 스마트폰이 저비용 고품질의 소형화된 3차원 카메라의 역할을 수행할 수 있는 것을 확인할 수 있다.

• 제어로봇시스템학회논문지
• /
• 제22권3호
• /
• pp.186-191
• /
• 2016

This paper addresses the development of 3D data acquisition system (3D scanner) based laser structured-light image. The 3D scanner consists of a stripe laser generator, a conventional camera, and a rotation table. The stripe laser onto an object has distortion according to 3D shape of an object. By analyzing the distortion of the laser stripe in a camera image, the scanner obtains a group of 3D point data of the object. A simple semiconductor stripe laser diode is adopted instead of an expensive LCD projector for complex structured-light pattern. The camera has an optical filter to remove illumination noise and improve the performance of the distance measurement. Experimental results show the 3D data acquisition performance of the scanner with less than 0.2mm measurement error in 2 minutes. It is possible to reconstruct a 3D shape of an object and to reproduce the object by a commercially available 3D printer.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 신호처리소사이어티 추계학술대회 논문집
• /
• pp.183-186
• /
• 2003

A vision sensor should be calibrated prior to infer a Euclidian shape reconstruction. A point to point calibration. also referred to as a hard calibration, estimates calibration parameters by means of a set of 3D to 2D point pairs. We proposed a new method for determining a set of 3D to 2D pairs for the structured light hard calibration. It is simply determined based on epipolar geometry between camera image plane and projector plane, and a projector calibrating grid pattern. The projector calibration is divided two stages; world 3D data acquisition Stage and corresponding 2D data acquisition stage. After 3D data points are derived using cross ratio, corresponding 2D point in the projector plane can be determined by the fundamental matrix and horizontal grid ID of a projector calibrating pattern. Euclidian reconstruction can be achieved by linear triangulation. and experimental results from simulation are presented.

• 반도체디스플레이기술학회지
• /
• 제5권1호
• /
• pp.1-4
• /
• 2006

Recently, Ball Grid Arrays(BGAs) are getting used more frequently for a package type. The connectors on a BGA consist of a large number of small solder balls in a grid shape on its bottom side. However, since balls of BGAs mounted on PCBs are not visible, inspection before mounting them is indispensable. High speed non-contact 3D measurement technologies are necessary far real-time measurement of ball height, the most important inspection item. In this paper, an accurate 3D data acquisition system for BGAs is proposed that can acquire 3D profile at high speed using a 3D smart camera and laser slit ray projection. Some clipping and morphological filtering operations are employed to remove spiky error data, which occur due to reflections from some ball area to camera direction.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2011년도 한국컴퓨터종합학술대회논문집 Vol.38 No.1(B)
• /
• pp.294-295
• /
• 2011

본 논문에서는 스마트폰의 카메라와 플래시를 이용한 Shape from Shading 방법으로 3차원 형상 취득을 위한 카메라와 플래시의 보정 기법을 제시한다. 영상에서 관찰되는 화소 값은 카메라의 반응곡선에 의해 비선형적으로 표현되고 렌즈의 왜곡으로 인해 3차원 형상 복원에 오차를 발생 시킨다. 기하학적(geometric) 보정과 방사량(radiometric) 보정, 플래시 보정을 수행함으로써 3차원 형상 복원의 오차를 줄인다.

• Current Optics and Photonics
• /
• 제2권6호
• /
• pp.554-562
• /
• 2018

This study presents a color 3D scanner based on the laser structured-light imaging method that can simultaneously acquire 3D shape data and color of a target object using a single camera. The 3D data acquisition of the scanner is based on the structured-light imaging method, and the color data is obtained from a natural color image. Because both the laser image and the color image are acquired by the same camera, it is efficient to obtain the 3D data and the color data of a pixel by avoiding the complicated correspondence algorithm. In addition to the 3D data, the color data is helpful for enhancing the realism of an object model. The proposed scanner consists of two line lasers, a color camera, and a rotation table. The line lasers are deployed at either side of the camera to eliminate shadow areas of a target object. This study addresses the calibration methods for the parameters of the camera, the plane equations covered by the line lasers, and the center of the rotation table. Experimental results demonstrate the performance in terms of accurate color and 3D data acquisition in this study.

• 대한전자공학회논문지SP
• /
• 제42권6호
• /
• pp.133-140
• /
• 2005

본 논문에서는 3차원 얼굴 인식기에서의 입력 데이터로 적합한 얼굴 데이터의 유클리디안 복원 시스템을 제안한다. 카메라 영상을 통한 유클리디안 복원을 위해서는 카메라의 보정정보와 복원할 특징 점의 대응 쌍 정보가 필요한데, 보정정보는 시스템의 변경이 없다면 불변한다. 따라서 고속의 유클리디안 복원을 위해서는 스테레오 영상간의 대응 쌍 정보 획득이 가장 중요하다. 시스템은 두 개의 카메라와 프로젝터 한 대로 구성하며, 피사체에 패턴을 투사하고 두 개의 카메라로부터 영상을 획득함으로써 동작한다. 사용 패턴은 단일 투사 줄무늬 패턴을 사용하며 줄무늬의 색도 정보와 채도 정보를 이용하여 '절대 코드 패턴'을 생성한다. 사용 시스템은 두 개의 카메라를 사용하기 때문에 색도 정보와 채도 정보가 비슷한 두 개의 영상을 얻을 수 있으며 이것은 획득한 두 개의 영상에 있는 줄무늬들에 대해 동일한 절대 라벨을 얻을 수 있게 한다. 절대 라벨링 된 줄무늬는 에피폴라 라인(epipolar line)상의 점들과 일대일 정합을 통해 고속의 3차원 데이터 복원을 가능하게 한다. 제안 방식은 얼굴 데이터에 적용되었으며 정확도와 총 소요 시간의 측정을 통해 제안 방식이 기존 방식에 비해 정확도 면에서 뒤지지 않으면서도 복원 속도 면에서 장점을 가짐을 확인할 수 있었다.

• Journal of Biosystems Engineering
• /
• 제26권3호
• /
• pp.279-286
• /
• 2001

The purpose of this study were to organize a sorting system, to develop an algorithm of image processing for the shape sorting, and to finally develop a scientific and objective shape sorting system of Korean Red-Ginseng for mechanization of the shape sorting. The results of this study are followed. 1. The shape sorting system of Korean Red-Ginseng consists of a control computer, a color CCD camera(WV-CP4110) for image processing, an image processing board(DT3153), and an image acquisition unit. 2. Many image processing skill, such as sliding, stretching, threshold, binary and D$\sub$t/ were used to analyze the shape sorting factors of Korean Red-ginseng. 3. The sorting accuracy of the shape sorting system for the Korean Red-Ginseng was 74.7%. It is 21.1% lower than that of human inspector. Although the system has low accuracy, using more cameras may improve its sorting accuracy.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 춘계학술대회 논문집
• /
• pp.396-399
• /
• 1995

In this study, Acquisition system is proposed to acquire 3 dimensional data of the free surface model using direct pulse control to machining center. Todo this, I/F to connect between manual operating handle and computer is made, and 3 dimensional shape measuring algorithm using Z-map is applied. The 3 dimensional shape data of the free surface model measured by laser displacement sensor and electric touch probe are achieved directly. Performance of the proposed system is evaluated through measurement of various shape model.