• 구강회복응용과학지
• /
• 제32권3호
• /
• pp.184-193
• /
• 2016

목적: 중합 시간이 bulk fill 유동성 복합레진의 미세누출에 미치는 영향을 마이크로시티를 이용하여 평가하고자 하였다. 연구 재료 및 방법: 30개의 발거된 인간 대구치에 변형된 2급 와동인 vertical slot cavity를 형성하였다. SonicFill과 SureFil SDR flow을 단일 충전하였으며, 다른 중합시간(20, 40, 60초)으로 광중합 하였다. 모든 표본은 5000번의 thermal cycle을 시행하였다. 치아는 silver nitrate 용액에 24시간 동안 침전 후 8시간 동안 현상액에 침전하였다. 마이크로시티를 사용하여 시편을 촬영 후 침투된 silver nitrate solution을 3차원적으로 재건하여 그 부피를 측정하였다. 변연 누출 결과값의 통계 처리는 Mann-Whitney test를 사용하였다. 결과: 광중합 시간의 증가는 두 bulk fill 유동성 복합레진에서 변연 누출을 증가시켰다. 두 복합레진 사이 유의한 차이는 없었다. 결론: 중합 시간은 bulk fill 유동성 복합레진의 변연 누출을 증가시킬 수 있는 요인이었다. 또한 마이크로시티를 통해 레진-치아 계면에서 변연 누출의 양을 비파괴적 방법으로 3차원적으로 재건하여 측정할 수 있었다.

• Restorative Dentistry and Endodontics
• /
• 제24권2호
• /
• pp.299-309
• /
• 1999

The composite resin, due to its esthetic qualities, is considered the material of choice for restoration of anterior teeth. With respect to shade control, the direct-placement resin composites offer some distinct advantages over indirect restorative procedures. Visible-light-cured (VLC) composites allow dentists to match existing tooth shades or to create new shades and to evaluate them immediately at the time of restoration placement. Optimal intraoral color control can be achieved if optical changes occurring during application are minimized. An ideal VLC composite, then, would be one which is optically stable throughout the polymerization process. The shade guides of the resin composites are generally made of plastic, rather than the actual composite material, and do not accurately depict the true shade, translucency, or opacity of the resin composite after polymerization. So the numerous problems associated with these shade guides lead to varied and sometimes unpredictable results. The aim of this study was to assess the color changes of current resin composite restorative materials which occur as a result of the polymerization process and to compare the color differences between the shade guides provided with the products and the actual resin composites before- and after-polymerization. The results obtained from this investigation should provide the clinician with information which may aid in improved color match of esthetic restoration. Five light activated, resin-based materials (${\AE}$litefil, Amelogen Universal, Spectrum TPH VeridonFil-Photo, and Z100) and shade guides were used in this study. Three specimens of each material and shade combination were made. Each material was condensed inside a 1.5mm thick metal mold with 10mm diameter and pressed between glass plates. Each material was measured immediately before polymerization, and polymerized with Curing Light XL 3000 (3M Dental products, USA) visible light-activation unit for 60 seconds at each side. The specimens were then polished sequentially on wet sandpaper. Shade guides were ground with polishing stones and rubber points (Shofu) to a thickness of approximately 1.5mm. Color characteristics were performed with a spectrophotometer (CM-3500d, Minolta Co., LTD). A computer-controlled spectrophotometer was used to determine CIELAB coordinates ($L^*$, $a^*$ and $b^*$) of each specimen and shade guide. The CIELAB measurements made it possible to evaluate the amount of the color difference values (${\Delta}E{^*}ab$) of resin composites before the polymerization process and shade guides using the post-polishing color of the composite as a control, CIE standard D65 was used as the light source. The results were as follows. 1. Each of the resin composites evaluated showed significant color changes during light-curing process. All the resin composites evaluated except all the tested shades of 2100 showed unacceptable level of color changes (${\Delta}E{^*}ab$ greater than 3.3) between pre-polymerization and post-polishing state. 2. Color differences between most of the resin composites tested and their corresponding shade guides were acceptable but those between C2 shade of ${\AE}$litefil and IE shade of Amelogen Universal and their respective shade guides exceeded what is acceptable. 3. Comparison of the mean ${\Delta}E{^*}ab$ values of materials revealed that Z100 showed the least overall color change between pre-polymerization and post-polishing state followed by ${\AE}$litefil, VeridonFil-Photo, Spectrum TPH, and Amelogen Universal in the order of increasing change and Amelogen Universal. Spectrum TPH, 2100, VeridonFil-Photo and ${\AE}$litefil for the color differences between actual resin and shade guide. 4. In the clinical environment, the shade guide is the better choice than the shade of the actual resin before polymerization when matching colors. But, it is recommended that custom shade guides be made from resin material itself for better color matching.

• Restorative Dentistry and Endodontics
• /
• 제35권1호
• /
• pp.30-39
• /
• 2010

본 연구에서는, 삼차원 유한요소분석법을 이용하여 복합레진 및 도재 라미네이트로 전치부 치간이개를 폐쇄할 때, 치간이개의 간격과 수복방법이 수복물의 접착계면에서의 응력분포에 미치는 영향을 비교하였다. 복합레진 혹은 도재 라미네이트로 수복된 모습의 유한요소모델을 형성하여 접착계면에서의 von Mises stress 분포 양태를 분석하였다. 수복형태는 크게 네 가지 범주를 고려하였다. Type I, 복합레진으로 인접면을 최소한으로 수복하는 경우; Type II, 치아 삭제 없이 복합레진으로 순면의 절반까지 수복하는 경우; Type III, 치아삭제 후복합레진으로 순면의 2/3까지 수복하는 경우; Type IV, 도재 라미네이트로 수복하는 경우 이 실험의 한계 내에서 다음과 같은 결론을 내릴 수 있었다. 모든 수복형태에 대해 치간이개 간격이 넓어질수록 접착계면에서 발생하는 최대응력 값은 증가하였으며, 도재 라미네이트로 치간이개 부위를 수복한 경우(Type IV)가 복합레진으로 수복한 경우(Type I, II, III)에 비해 높은 최대응력값을 나타내었다. 그러나 치간이개 간격이 넓어질수록 도재 라미네이트와 복합레진에서 발생하는 최대응력값의 차리는 감소하였으며, 치간이개 간격의 증가에 따른 최대응력값의 증가율은 도재 라미네이트가 복합레진으로 수복하는 경우보다 낮았다.

• 한국환경복원기술학회지
• /
• 제4권2호
• /
• pp.74-83
• /
• 2001

The purpose of this study was investigate to the influence of forest roads characteristics and environment factors on the soil erosion, stability and vegetation survival of cut slope in forest roads. The results obtained could be summarized as follows; 1. The correlated factors between slope erosion and variables in cut slope were altitude, convex, degree of slope, length of slope and soil depth. In the stepwise regression analysis, length of slope and soil hardness was a high significant and its regression equation was given by -89.6136 + 15.0667X14 + 16.6713X15($R^2$ = 0.6712). 2. The main factors influencing the stability of cut slope were significant in order of coverage, middle, convex, length of slope and north, and its discriminant equation was given by -1.019 + 0.064X22 - 0.808X8 - 0.622X24 + 0.742X11 - 0.172X14 - 0.545X6 ($R^2$ = 0.793). 3. The centroids value of discriminant function in the stability and unstability estimated to 1.244 and -1.348, respectively. The boundary value between two groups related to slope stability was -0.1038. The prediction rate of discriminant function for stability evaluation of was as high as 91.3%. 4. The dominant species of invasion vegetation on the cut slope consist with Carex humilis, Agropyron tsukushiense var. transiens, Calamagrostis arundinacea, Miscanthus sinensis var. purpurascens, and Ixeris dentata in survey area. The rate of vegetation invasion more increased by time passed. 5. The life form of invasion vegetation in cut slop showed to $H-D_1-R_{2,3}-e$ type of the hemicryptophyte of dormancy form, dissem inated widely by wind and water of dissminule type, moderate extent and narrowest extent of radicoid type, erect form of growth form. 6. The correlated factors between forest enviroment and coverage appeared north, passage years and middle position of slope at 5% level. The forest environment factors influencing the invasion plants in survey area were shown in order to altitude, passage years, rock(none), forest type(mixed) and stone amount. The regression equation was given by 17.5228 - 0.0911X3 + 3.6189X28 15.8493X22 19.8544X25 + 0.3558X26 ($R^2$ = 0.4026).

• 환경영향평가
• /
• 제26권3호
• /
• pp.195-206
• /
• 2017

최근 도시물순환 회복을 위한 저영향개발(LID) 기법 적용에 대한 관심이 증가함에 따라, LID 계획 설계 및 시공, 유지관리 등에 활용할 수 있는 건축정보모델(BIM)에 대한 관심이 증가하고 있다. 이에 따라 본 논문에서는 LID 기법의 계획 및 설계공정 단계에서 BIM의 적용가능성과 활용방안을 검토하고자 2D기반의 설계도서를 통해 산출된 LID 시설물의 물량과 BIM 모델링에서 산출된 LID 시설물의 물량을 자동으로 비교하는 모듈을 개발하여 2D기반 산출물량과 비교검토하였다. BIM 기반 LID 시설물량 자동검토 모듈을 개발하기 위해서 연구대상지를 선정하고, BIM 모델링을 통해 물량산출표를 추출하였다. 추출된 물량산출표를 2D 기반의 물량산출표와 비교하기 위한 알고리듬을 작성하고, 작성된 알고리듬을 프로그램화해 산출된 물량의 비교 검토를 실시하였다. 대상지에 적용된 LID 시설물의 모델링을 완료하고, LID 시설물량 자동검토 모듈을 이용해 2D 기반 설계도서의 물량산출표와 BIM기반 물량산출표의 비교 검토를 실시하여, 좀 더 정확한 물량산출을 진행하였다. 또한 산출된 결과 중 재료의 물량 오차율이 ${\pm}30%$를 벗어나는 시설물들의 오차발생 원인을 분석하여 LID 시설물량 자동검토 모듈의 정확도를 검토하였다. LID 시설물량 자동검토 모듈을 통해, 설계도서를 기반으로 한 물량 산출과정에서 발생할 수 있는 오류들을 조기에 발견하고 수정할 수 있을 것으로 보이며, BIM 기반 LID 시설물 종합 관리 시스템 구축의 기반을 마련할 수 있을 것으로 판단된다.

• 폴리머
• /
• 제38권6호
• /
• pp.694-701
• /
• 2014

본 연구에서는 다양한 플라보노이드를 주성분으로 하는 마디풀 추출물의 피부 흡수를 증진시키기 위하여 인지질(PC)과 계면활성제($Tego^{(R)}$ care 450)로 구성된 탄성 리포좀(ELPs)을 제조하였으며, 그것의 물리적 특성 및 in vitro 피부 투과능을 평가하였다. 마디풀 추출물을 담지한 탄성 리포좀의 평균 입자 크기는 148.1~262.2 nm, 가변형성 지수는 11.5~25.4, 포집 효율은 53.1~66.3%로 나타났다. Franz diffusion cell을 이용한 in vitro 피부 투과 실험결과, 인지질 대 계면활성제 비율이 85:15인 ELP-4가 계면활성제가 포함되지 않은 일반 리포좀인 ELP-1보다 더 높은 피부 투과능을 갖는 것을 확인하였으며, 이를 형광 이미지 복원 현미경을 통해 가시적으로 확인하였다. 결론적으로 최적 조건으로 선정된 ELP-4는 마디풀 추출물의 피부 흡수 증진을 위한 유용한 피부 전달체로 이용될 수 있음을 확인하였다.

• 대한치과보철학회지
• /
• 제42권3호
• /
• pp.280-293
• /
• 2004

Statement of problem. Glass fiber post is one of recent developments to accommodate esthetic restoration for endodontically treated teeth. This has many advantages over conventional post system in physical properties, esthetic factor, risk of root and restoration fracture, adhesion to core, radiopacity, removal and retrievabilty, biocompatibility and chemical stability. Purpose. This in vitro study was to evaluate the most suitable type of resin core for the glass fiber post through surveying the fracture modes and the maximum load that fractures the tooth. Material and methods. 50 sound maxillary premolars restored with glass fiber posts($ParaPost^{(R)}$ Fiber White) and different types of resin cores(ParaCore, $Z100^{TM}$, $Rebilda^{(R)}$ and $Admira^{(R)}$) were prepared and loaded to faiure in a universal test machine. The maximum fracture load and fracture mode were investigated in the specimens that were restored with resin and those of metal cast and core. With the data, Wilcoxon rank sum test was used to validate the significance between the test groups, and Tukey' s studentized range test was used to check if there is any significant statistical difference between each test group. Every analysis was approved with 95% reliance. Results. On measuring the maximum fracture load of teeth specimens, there was a significant difference between the maximum fracture loads of the tooth specimens. ParaCore showed the highest mean maximum fracture load followed by $Z100^{TM}$. And, the distribution of fracture mode of tooth specimens showed generally Type D, the three parted fracture of the core around the post was mostly seen(62.5%), and specifically, ParaCore showed 90% and $Z100^{TM}$ showed 100% Type D fracture. Conclusion. Referring to the values of maximum fracture load and mean compressive fracture load, ParaCore and $Z100^{TM}$ had high values and are recommended as tooth colored resin core material for glass fiber post. CLINICAL IMPLICATIONS. This study was carried out intending to be of aid in selecting the appropriate resin core for the glass fiber post. The dual cure type composite resin ParaCore and light cure type composite resin $Z100^{TM}$ have good properties and are recommended as tooth colored resin core material for glass fiber post.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2004년도 춘계학술발표회논문집
• /
• pp.389-394
• /
• 2004

Structure-typed cultural heritage, objects of preservation are positioned as one of the very important heritage in the nation, and the preservation of prototypical structures become influential in national development and against natural disaster. For this reason, Digital Close Range Photogrammetry has recently been diversely used. Despite its popular use, the measurement has limits that make it unsuitable for photographing precise cultural heritage situated at high mountainous terrain or where people can not approach easily. These high gigantic stone statues are among the preserved structure-typed cultural heritage. In order to supplement the limits, when using the measurement, a camera tripod with +30m, a ladder truck and a shore should be equipped, which means additional equipment leads to it being a waste of cost and time. In this vein, a device was developed in detail, using a RC Helicopter installed with a CCD video camera with ease of control, safety, equipment, carrying, movement and approach, then checked image shot by a wireless modem at real time and considered the economical efficiency without re-photographing. Next, the author digitized the images of the nationally designated structure-typed cultural heritage, used materials on their restoration as the third dimension in order to construct the integrated management-information system for cultural heritage. Through the above processes, this study can provide specific information on 3D images and 3D CAD sections of structured-typed cultural heritage for both the public and specialists on the web. Moreover, it suggests the foundation to restore the damaged cultural heritage in the future by aiming for their effective management and preservation.

• 한국멀티미디어학회논문지
• /
• 제16권2호
• /
• pp.206-212
• /
• 2013

멀티미디어, 가상현실 및 네트워크로 대표되는 ICT 기술은 문화콘텐츠의 원형을 보존하고 복원을 위한 좋은 수단이다. 본 논문에서는 우리나라의 대표적인 문화콘텐츠라 할 수 있는 전통목조건축물을 디지털화하기 위한 멀티미디어와 증강현실 기술의 세부적인 방법을 제시하고 구현하였다. 그래픽 기법을 사용하여 전통목조건축물에 사용되는 건축 부재들을 3D 모델링하였고, 전통목조건축물의 지붕 곡선을 표현하였고, 전통목조건축물의 재질 매핑을 하였다. 또한, 마커 기반 증강현실 기법을 사용하여 모바일 기기를 통하여 전통목조건축물의 정보를 획득할 수 있도록 구현하였다. 멀티미디어 및 증강현실로 구현된 전통목조건축물 결과물의 활용 방안을 또한 제시하였다.

• 한국농공학회논문집
• /
• 제58권6호
• /
• pp.9-21
• /
• 2016

Agricultural reservoirs in Korea have been recognized as an emerging resource for recreational and cultural activities for residents. However, most of the reservoirs are eutrophic and showing high level of contamination with nuisance algal bloom and offensive odor during the summer. For better management and restoration of the reservoirs' water quality, scientific modeling approaches could be used to diagnose the problems and evaluate the efficacy of alternative control measures. The objectives of this study were to validate the performance of a three-dimensional (3D) hydrodynamic and water quality model (Environmental Fluid Dynamics Code, EFDC) for a eutrophic agricultural reservoir and assess the effect of bypassing of the effluent from a wastewater treatment plant on the reservoir water quality. The 3D model successfully simulated the temporal variations of water temperature, DO, TOC, nitrogen and phosphorus species and Chl-a observed in 2014 and also captured their spatial heterogeneity in the reservoir. The simulation results indicated that the point source bypassing may reduce the T-N and T-P concentrations of the reservoir by 6.6 ~ 8.2 %, and 1.7 ~ 16.8 %, respectively. The bypassing, however, showed a marginal effect on the control of TOC due to the increased algal biomass associated with the increased water retention time after bypassing as well as the lower TOC level of the effluent compared to the ambient reservoir water.