• 한국정밀공학회지
• /
• 제30권3호
• /
• pp.292-299
• /
• 2013

The measurement in the manufacturing process of curved ship hull plates still depends on wooden templates as a standard instrument. The metrology-enabled automation in the shipbuilding process has been challenged instead of line measurement with wooden templates. The developed measurement system consists of a CCD camera, multiple structured laser sources and 3-DOF motion device. The system carries out measurement of curved profiles for large scale plates by an optical triangulation method. The results of experiment conducted in a manufacturing shop demonstrate the accurate and robust performance.

• 대한기계학회논문집B
• /
• 제21권5호
• /
• pp.700-712
• /
• 1997

The flowfield generated by a 2-D rotating cylinder on a plane moving at freestream velocity was experimentally investigated in a wind tunnel to simulate aerodynamic characteristics of rotating wheels of an automobile. In the flowfield around a rotating cylinder at 3*10$^{3}$ < Re$_{d}$<8*10$^{3}$, unique mean flow and turbulence characteristics were confirmed by hot-wire measurements as well as frequency analysis, which was supported by flow visualization. In the vicinity of a rotating cylinder, a unique turbulence structure on .root.over bar u'$^{2}$ profiles was formed in hump-like shape at 1 < y/d < 3. A peak frequency which characterized the effect of a rotating cylinder had the same value of the rotation rate of a cylinder. In case of cylinder rotation, the depths of mean velocity -defect and turbulent-shear regions were thickened by 20-40% at 0 < x/d < 10 compared with the case of cylinder stationary. Far downstream beyond x/d > 10, the flowfield generated by a rotating cylinder showed self-similarity in the profiles of mean velocity and turbulence quantities. The effect of a rotating cylinder was independent of its rotation rate and Reynolds number in the measurement range.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 B
• /
• pp.597-599
• /
• 1992

A calculation method for predicting the instantaneous torques by the inductance profiles of a switched reluctance motor (SRM) is presented. The method considers saturation and nonlinearities in the magnetic circuits. The inductance of SRM varies complex according to the input current waveforms and rotor position angle, thus the accurate calculation technique is needed to estimate the inductance value at arbitary input current and rotor position angle. This paper describes how the inductance profiles influence the torque produced by the input current of SRM and, proposes a calculation technique of the permeabilities, reluctances, current waveforms and torques of a 6/4 3-phase SRM.

• 전자공학회논문지A
• /
• 제32A권8호
• /
• pp.94-106
• /
• 1995

A three-dimensional(3D) Monte Carlo simulator for boron ion implantation into <100>single-crystal silicon considering the mask structure has been developed to predict the mask-dependent impurity doping profiles of the implanted boron at low energies into the reduced area according to the trend of a reduction in the size of semiconductor devices. All relevant important parameters during ion implantation have been taken into account in this simulator. These are incident energy, tilt and rotation of wafer, orientation of silicon wafer, presence of native silicon dioxide layer, dose, wafer temperature, ion beam divergence, masking thickness, and size and structure of open window in the mask. The one-dimensional(1D) results obtained by using the 3D simulator have been compared with the SIMS experiments to demonstrate its capabilities and confirem its reliability, and we obtained relatively accurate 1D doping profiles. Through these 3D simulations considering the hole structure and its size, we found the mask effects during boron ion implantation process.

• 한국산학기술학회논문지
• /
• 제15권8호
• /
• pp.5269-5279
• /
• 2014

SMT에 의한 PCB 조립에서 발생하는 가장 큰 불량의 원인은 솔더의 도포이다. 기존의 솔더 도포의 검사 방법은 신뢰도가 낮고 검사 속도가 느리며 가격이 높다. 본 논문에서는 2차원 영상을 추가로 획득하지 않고, 3차원 형상정보에서 PCB 위의 솔더영역을 검출하고 높이를 계산하는 방법을 제안한다. 솔더영역은 3차원 형상정보에서 측정점과 PCB 전체의 위상평균의 상대적 위상에 의하여 추출한다. 또 솔더영역의 높이를 신뢰도 높게 측정하기 위하여, 솔더영역의 높이는 반복능과 신뢰도를 적용한 측정점들의 위상평균으로 계산된다. 제안한 방법에 대한 측정실험 결과 검사시간에서 17.5%, 높이계산에서 29%의 반복능 향상을 보였으며, SPI장비 가격 인하 및 검사시간 단축 효과가 있다.

• ETRI Journal
• /
• 제33권3호
• /
• pp.326-334
• /
• 2011

This paper outlines the time jitter effect of a sampling clock on a software-defined radio technology-based digital intermediate frequency (IF) transceiver for a mobile communication base station. The implemented digital IF transceiver is reconfigurable to high-speed data packet access (HSDPA) and three bandwidth profiles: 1.75 MHz, 3.5 MHz, and 7 MHz, each incorporating the IEEE 802.16d worldwide interoperability for microwave access (WiMAX) standard. This paper examines the relationship between the signal-to-noise ratio (SNR) characteristics of a digital IF transceiver with an under-sampling scheme and the sampling jitter effect on a multichannel orthogonal frequency-division multiplexing (OFDM) signal. The simulation and experimental results show that the SNR of the OFDM system with narrower band profiles is more susceptible to sampling clock jitter than systems with relatively wider band profiles. Further, for systems with a comparable bandwidth, HSDPA outperforms WiMAX, for example, a 5 dB error vector magnitude improvement at 15 picoseconds time jitter for a bandwidth of WiMAX 3.5 MHz profile.

• Journal of Korean Vacuum Science & Technology
• /
• 제3권1호
• /
• pp.1-9
• /
• 1999

This paper presents a newly enhanced damage model in Monte Carlo (MC) simulation for the accurate prediction of 3-Dimensional (3D) as-implanted impurity and point defect profiles induced by ion implantation in (100) crystal silicon. An empirical electronic energy loss model for B, BF2, As, P and Si self implant over the wide energy range has been proposed for the ULSI device technology and development. Our model shows very good agreement with the SIMS data over the wide energy range. In the damage accumulation, we considered the self-annealing effects by introducing our proposed non-linear recomvination probability function of each point defect for the computational efficiency. For the damage profiles, we compared the published RBS/channeling data with our results of phosphorus implants. Our damage model shows very reasonable agreement with the experiments for phosphorus implants.

• 방송공학회논문지
• /
• 제18권6호
• /
• pp.850-858
• /
• 2013

본 논문에서는 스테레오스코픽 3D 동영상에서 왼쪽과 오른쪽 영상 사이의 프레임 동기가 맞지 않아 시청에 어려움을 주는 문제를 해결하기 위해 두 영상에서 물체의 움직임에 따른 시간적 프레임 차분 영상을 이용한 동기화 방법을 제안한다. 먼저, 스테레오 조정(rectification) 과정을 통해 수직 시차를 보정한 왼쪽과 오른쪽 입력 동영상에서 시간적 프레임 차분 영상을 구하고, 두 차분 영상들에 대한 수평 방향 프로파일을 계산한다. 그 다음, 두 수평 프로파일의 절대 오차에 대한 평균 (mean of absolute difference(MAD))을 계산하여 그 값이 최소가 되는 프레임 조합을 찾아 스테레오스코픽 3D 동영상의 동기를 맞출 수 있도록 하였다. 실험결과, 두 영상의 프레임 동기가 맞는 프레임 조합에서 최소 MAD 값을 기록하여 제안 방법을 통해 스테레오스코픽 3D 동영상에서의 프레임 동기화가 가능하며, 제안 방법이 가우시안 잡음이나 H.264/AVC를 이용한 동영상 압축에 대해서도 강인함을 갖고 있음을 알 수 있다.

• 한국대기환경학회지
• /
• 제22권3호
• /
• pp.271-285
• /
• 2006

A two-dimensional photochemical transport model (2D PTM) is simulated to describe the transport and chemical reaction of ozone related to aerosols in the troposphere and stratosphere. The vertical profiles and total amounts of ozone, which are advected by both residual Eulerian circulation and the adiabatic circulation under certain circumstance, have been compared with the observation data such as ozonesondes, Brewer spectrometer, the Upper Atmosphere Research Satellite (UARS), and the Total Ozone Mapping Spectrophotometer (TOMS). As a result, we find that the observed distribution of ozone Is adequately reproduced in the model at middle and high latitude in the Northern Hemisphere as well as at Phang ($36^{\circ}\;02'N,\;129^{\circ}\;23'E$) in South Korea. In particular, the 2D PTM is well simulated in the ozone decrease due to the Pinatubo volcanic eruption in 1991. However, ozone mixing ratio are more underestimated than those of UARS and ozonesondes, because are very sensitive to the latitude of transport across the tropopause associated with both Rummukainen errors and off-line model. Relative mean bias errors and relative root mean square errors of ozone calculations using the 2D PTM are shown within${\pm}10%$, respectively.

• Clinical and Experimental Pediatrics
• /
• 제59권2호
• /
• pp.65-73
• /
• 2016

Purpose: Only a few studies have explored nationwide trends in lipid profiles among Asian adolescents. We aimed to assess trends in lipid profiles and the associated lifestyle factors among Korean children. Methods: We analyzed data for 2,094 adolescents who were aged 10-18 years and had participated in the Korea National Health and Nutrition Examination Surveys in 1998 and 2010. Results: During 1998-2010, the prevalence of obesity significantly increased in boys, but no changes were observed in girls. Over this period, there was a small but significant decrease in the mean lowdensity lipoprotein (LDL)-cholesterol level in boys (1998, 87.5 mg/dL; 2010, 83.6 mg/dL; P=0.019) and mean triglyceride levels in girls (1998, 90.8 mg/dL; 2010, 85.8 mg/dL; P=0.020). There were no significant changes in the prevalence of dyslipidemia in boys, but a modest decrease was noted in girls (1998, 25.1%; 2010, 18.3%; P=0.052). During the study period, the prevalence of breakfast skipping decreased, whereas that of regular exercise increased in both groups. Daily total energy intake did not change between these years. In multivariable logistic regression analyses, breakfast skipping was associated with increased risk of hyper-LDL-cholesterolemia in boys (odds ratio [OR], 5.77) and hypertriglyceridemia (OR, 2.27) in girls. Regular exercise was associated with decreased risk of hypo-HDL-cholesterolemia (OR, 0.40) in boys. Conclusion: Although the prevalence of obesity in boys increased, favorable or constant trends in lipid profiles were observed among Korean adolescents during 1998-2010. Decrease in breakfast skipping and increase in regular exercise may have contributed to these trends.