• 한국군사과학기술학회지
• /
• 제20권2호
• /
• pp.231-237
• /
• 2017

The profile of unpaved road is an important issue in the reliability of endurance test. Efforts on measuring 2D road profile and analyzing the severity have been continued in the study of performing reliable endurance test evaluations through reflecting the results of such measurement and analysis. However, 2D road profile has limitation in measuring the profile in the road width direction because data is obtained along the trailer wheel track. Therefore, in order to measure 3-dimensional shape of road surface and construct severity DB of 3D road profile, Changwon Proving Ground(CPG) of Agency for Defense Development(ADD) developed 3D profilometer which is composed of laser scanner, IMU, GPS, encoder and so on. This paper focuses on the analysis of unpaved road severity using 3D road profile for army operation roads. This results will be used to manage test courses severity of CPG.

• Current Optics and Photonics
• /
• 제2권6호
• /
• pp.568-575
• /
• 2018

Various techniques to measure the three-dimensional (3D) surface profile of a 3D micro- or nanostructure have been proposed. However, it is difficult to apply such techniques directly to industrial uses because most of them are relatively slow, unreliable, and expensive. The HiLo optical imaging technique, which was recently introduced in the field of fluorescence imaging, is a promising wide-field imaging technique capable of high-speed imaging with a simple optical configuration. It has not been used in measuring a 3D surface profile although confocal microscopy originally developed for fluorescence imaging has been adapted to the field of 3D optical measurement for a long time. In this paper, to the best of our knowledge, the HiLo optical imaging technique for measuring a 3D surface profile is proposed for the first time. Its optical configuration and algorithm for a precisely detecting surface position are designed, optimized, and implemented. Optical performance for several 3D microscale structures is evaluated, and it is confirmed that the capability of measuring a 3D surface profile with HiLo optical imaging technique is comparable to that with confocal microscopy.

• 지구물리와물리탐사
• /
• 제10권4호
• /
• pp.268-274
• /
• 2007

2차원 측선을 따라 획득한 MT 탐사 자료를 3차원 역산하여 제주도 지전기 구조의 해석을 시도하였다. 이에 앞서 TM 모드 자료와 TE 모드 자료를 각각, 또는 두 모드의 자료를 동시에 이용하여 2차원 역산을 수행하였다. 이 세가지 2차원 역산을 통해 얻은 영상을 3차원 영상과 비교분석하기 위해 측선을 포함하는 3차원 모델을 구성하여 3차원 역산 결과를 도출하였다. 모든 역산 결과에서 전체적으로 동일한 층서구조를 확인할 수 있었으나 3차원 역산에서는 보이지 않는 전기비저항 이상대가 2차원 역산에는 나타난다. 이는 측선 직하부에 있지 않은 3차원 이상체의 영향으로 2차원 역산 결과가 왜곡된 것이라 유추할 수 있다. 역산 영상의 비교 분석 결과 측선 하부에서 제주도의 지전기 구조는 심도 5 km 이내에서는 전체적으로 고비저항.저비저항.고비저항의 3층 수평 층서 구조임을 알 수 있었고, 3차원 역산이 더욱 신뢰성 있는 영상을 보임을 확인하였다.

• 한국CDE학회논문집
• /
• 제7권3호
• /
• pp.141-147
• /
• 2002

Profile machining using cutter diameter compensation is widely used in die and mould manufacturing. Especially automotive die makers try to use 3D-profile machining for trimming or flange dies. But the technological requirements and implementation issues haven't been defined. In this paper we summarized the requirements and issues of 3D-profile machining. Approximation of input profiles into sequences of line and helical arc is the first major issue. The second major issue is removing cutter inter- ference from the approximated curves holding z-values when the maximum cutter diameter is given. Keeping constant machining width, local machining, path linking problems and several detail technological requirements are also discussed.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2002년도 금형가공 심포지엄
• /
• pp.19-25
• /
• 2002

Profile machining using cutter diameter compensation is widely used in die and mould manufacturing. Especially automotive die makers try to use 3D-profile machining for trimming or flange dies. But the technological requirements and implementation issues haven't been defined. In this paper we summarized the requirements and issues of 3D-profile machining. Approximation of input profiles into sequences of line and helical arc is the first major issue. The second major issue is removing cutter interference from the approximated curves holding z-values when the maximum cutter diameter is given. Keeping constant machining width, local machining, path linking problems and several detail technological requirements are also discussed.

• 대한기계학회논문집
• /
• 제19권3호
• /
• pp.670-679
• /
• 1995

This paper presents the 3-D profile measurement system of live human faces, which was developed specially for 'KUMDORI sculptor robot' of the '93 Taejon Exposition. '93 Taejon EXPO. The basic principle for measurement adopts the slit beam projection which is a method of measuring 3-D surface profiles using geometric optics between the slit beam and the CCD camera. Since the slit beam projection consumes long measuring time, it is unfit to measure the 3-D profiles of living objects as human. Therefore, the projection type slit beam method which consumes short measuring time is newly suggested. And an algorithm to reconstruct the 3-D profile from the deformed images using finite approximated calibration is suggested and practically implemented. The projection type slit beam method was applied to spectators in a period of '93 Taejon EXPO. The measurement results show that the technique is suitable for 3-D face profile measurement on a living body.

• 소성∙가공
• /
• 제28권4호
• /
• pp.197-202
• /
• 2019

This paper proposes a precise mathematical model for the prediction of the variation of the roll force across a strip in cold rolling. It further describes the deformation characteristics of the strip using a 3-D finite element method. The different features of hot rolling and cold rolling through a 3-D finite element method are shown. The predicted roll force profile and tension profile are verified through comparison with the prediction from a 3-D finite element method.

• 한국측량학회지
• /
• 제26권6호
• /
• pp.583-590
• /
• 2008

도로, 철도 및 운하 등을 비롯한 각종 건설공사를 위해서는 건설공사의 설계과정에서 건설예정지에 대한 지형측량을 실시하고 이를 기초로 종 횡단면도의 제작이 필수적인 요소이다. 본 연구에서는 건설예정지에 대한 프로파일제작에 있어 NGIS구축사업에 의해 제작된 수치지형도의 지형정보를 이용하여 정밀 3차원지형모델을 구축하고, 이로부터 자동 프로파일을 생성하여 종 횡단면도로 활용할 수 있는 방안을 검토하고자 하였다. 이를 위해 수치지형도로부터 표고 및 주요시설물의 레이어를 각각 추출하고 이를 이용하여 정밀 3차원 지형모델을 구축하는 한편, 3차원 지형모델로부터 자동 프로파일을 생성하여 종 횡단면도를 제작하였다. 그리고 생성된 프로파일의 경로에 대하여 지형측량을 실시하여 상호 분석함으로써 자동 생성된 프로파일의 정확도가 현지측량 정확도를 만족시킬 수 있는지의 여부를 검토하였다. 본 연구의 결과는 건설공사를 위해 실시되는 설계과정에서 설계기간의 단축, 설계비용의 감소와 설계업무의 효율화를 꾀할 수 있는 새로운 개념의 프로파일 생성기법으로 제안할 수 있을 것으로 사료된다.

• Journal of the Optical Society of Korea
• /
• 제12권4호
• /
• pp.281-287
• /
• 2008

An acousto-optic tunable filter based 3-D micro surface profile measurement using an equally spaced 5 spectral phase shifting is described. The 5-bucket spectral phase shifting method is compared with a Fourier-transform method in the spectral domain. It can provide a fast measurement capability while maintaining high accuracy since it needs only 5 pieces of spectrally phase shifted imaging data and a simple calculation in comparison with the Fourier transform method that requires full wavelength scanning data and relatively complicated computation. The 3-D profile data of micro objects can be obtained in a few seconds with an accuracy of ${\sim}10nm$. The 3-D profile method also has an inherent benefit in terms of being speckle-free in measuring diffuse micro objects by employing an incoherent light source. Those simplicity and practical applicability is expected to have diverse applications in 3-D micro profilometry such as semiconductors and micro-biology.

• 대한기계학회논문집A
• /
• 제23권11호
• /
• pp.1929-1939
• /
• 1999

This paper presents a neural network approach, which was named PRONET, to 3D object recognition and pose calculation. 3D objects are represented using a set of centroidal profile patterns that describe the boundary of the 2D views taken from evenly distributed view points. PRONET consists of the training stage and the execution stage. In the training stage, a three-layer feed-forward neural network is trained with the centroidal profile patterns using an error back-propagation method. In the execution stage, by matching a centroidal profile pattern of the given image with the best fitting centroidal profile pattern using the neural network, the identity and approximate orientation of the real object, such as a workpiece in arbitrary pose, are obtained. In the matching procedure, line-to-line correspondence between image features and 3D CAD features are also obtained. An iterative model posing method then calculates the more exact pose of the object based on initial orientation and correspondence.