This study is intended to compare an actual wedding dress being made completely through 3D software, and compare it with an actual dress of a real model by using collective tools for comparative analysis. The method of the study was conducted via a literature review along with the production of the dresses. In the production, two wedding dresses for the small wedding ceremony were designed. Each of the design was made into both 3D and an actual garment. The results are as follows. First, the 3D whole body scanner reflects the measure of the exact human body size, however there were some difficulties in matching what the customer wanted, because the difference of the skin color and the hair style. Second, the pattern of the dress is much more easily altered than it was in the real production. Third, the silhouette of the virtual and the actual person with the dress was nearly the same. Fourth, textile tool was much more convenient because of the use of real-time rendering on the virtual dresses. Lastly, the lace and biz decoration were flat, and the luster was duller than in reality. Prospectively, the consumer will decide their own design of variety through the use of the avatar without wearing the actual dresses, and they would demand what the another one desired, different from the presented ones by making the corrections by themselves. Through this process, the consumer would be actively participating in the design, a step which would finally lead to the two way designing rather than the one way design of present times.
The multi-frequency characteristics of anchovy schools were investigated using six acoustic lines collected at 38 and 120 kHz while a primary trawl survey was conducted from 14 April and 18 April of 2014 in off the coast of Tongyeong and Geo-je. Here, the frequency characteristics mean ${\Delta}MVBS$ that is the difference of Mean Volume Backscattering Strength at two frequencies. To use the characteristics effectively, the optimal cell size ($10{\times}2m$) was determined by examining several different cell sizes in consideration with the shapes of fish schools and the ${\Delta}MVBS$ pattern. By examining 6 histograms of ${\Delta}MVBS$, afternoon groups were occupied more in the ${\Delta}MVBS$ range of -6~-4 dB than that of -4~-2 dB, comparing to morning groups. The ${\Delta}MVBS$ range of the morning groups was between -16.9 dB and 11.6 dB, and that of the afternoon groups -16.7 dB and 13.0 dB. The average and standard deviation were $-3.9{\pm}3.6$ dB in the morning and $-4.1{\pm}3.4$ dB in the afternoon, suggesting that morning groups were 2 dB higher than afternoon groups. The ${\Delta}MVBS$ range of all anchovy schools regardless of morning and afternoon was between -16.9 dB and 13.0 dB, their average ${\Delta}MVBS$ was $-4.1{\pm}3.5$ dB. The characteristics can support to identify anchovy species in the waters where multiple fish species are distributed. It is hoped that this study presents the availability and benefit of acoustic data from a primary trawl survey.
Fiber reinforced plastic (FRP) structural shapes are readily available in civil engineering applications. Among many manufacturing techniques used for FRP structural shapes, pultrusion process is one of the most widely used techniques in civil engineering applications. Pultrusion is a manufacturing process for producing continuous lengths of reinforced polymeric plastic structural shapes with constant cross-section. Pultruded composites are attractive for structural applications because of their continuous mass production with excellent mechanical properties. This paper presents the results of investigations pertaining to the bolted connection with two bolts for the pultruded FRP (PFRP) structural members. PFRP bolted connection tests were conducted with end distance to bolt diameter ratio ($e_1/d_b$) and two types of bolt pattern such as horizontal (Pattern A) and vertical arrangement (Pattern B). As a result, it is found that the $e_1/d_b$ is recommended as the ratio of 4. In addition, it is also found that the bearing strengths at failure of the Pattern A and Pattern B have a similar value.
Currently the fashion industry is developing to create a novel culture due to the very sensitive and knowledge-oriented advancement of the IT industry. With fast turnover of information, consumers have come to have a more diverse desire for purchasing. Cubical expression techniques, which empathizes formativeness, can be a creative expression method adjusting into the trend of this era. Along with functional aspects of consumers, even in a textile manufacturing sector, new materials are required to meet sensitive and emotional aspects. Consumers' desire for new and creative designs and the development and adoption of new materials are essential to meet their emotions. The IT industry and fashion industry are forced to combine and a 3D apparel CAD system has been developed, enabling virtual clothing to be represented within a computer virtual space. All processes such as design, pattern creation, sewing and simulation are possible in 3D level. Digital clothing can shorten the production process time and is very effective in that it can reduce clothing waste generated during the sample production. This paper reviewed the works of Dutch designer, Iris van Herpen, who has developed formative designs. She tries to build, construct, and sculpt employing diversified materials other than soft textile materials, as shown in her series of fashion shows. The materials include films, 3D printed polymers, stiff and sheer organza, and artificial leather textiles. A few characteristics of her works have been selected in order to prepare patterns exhibiting the traits. The paper further focused on the physical features of the textile materials used to express similar techniques and its various forms were reviewed.
The purpose of this research is to show how to use the patternist's CAD system in order to make design patterns efficiantly. Using the PAD System Technologies company's PAD System Module, which is very officiant in designing patterns, the basic pattern or design pattern can be designed and applyed to the Sample Module, thus, then it could manufacture, retouch or choose a model, making it posible to go to the next level which is seam patterns for industrial use. By understanding the change of the design that is chosen through the design pattern making and Sample Module process', this study is presentated a plan on how to utilize the patternist's working adaption ability by the CAD system, and also considered the problems in using it. Ability of Design Confrontation of CAD System: 1) The result of an operation can be saved and retouched. On a saved list the patterns can be chosen and changed, thus, making it posible to complete a design very quickly. 2) When sewing every designed pattern in Sample Module, the model can be operated merely by selecting each sewing position, thus creating the same effect of a designer's muslin sample process in a much lesser time. Point at issue in the utilization CAD system: 1) When combining two darts into one place the amounts of darts that are already these have to be erasers, and then, the two darts points are moved that place, thus, containing them, which is very conplicated. 2) When making a gathering, because system can only be recognized in a opend line, the pattern should be separated in order to put a gathering inside a pattern. 3) In order to readjust the amounte of dart. The dart is erased first and then made new dart again. 4) When making tucks in a Sample Module, the form that gets narrow towards the pivot point can not be recognized so the sewing lines of the tucks is adjusted into parallel lines. 5) The Sample Module 3D operation can not attach the bodice to the shirts, instead they become fixed into each other. In the case of shoulder line tucks the amounts of pleats can not be expanded draperary naturally, thus, making it hard to showing the silhouette accurately. If these problems are solved, especially if the silhouette of a model can be created to have natural drapery in the 3D Module, models can be shown on the screen in possible to compare and examine even a change of a detail, by designing this 3D Module Production sample process will be more effective, thus, making the CAD system more useful in sewing design process.
Recent mold industry uses many roll-to-roll processes that can produce high production speed and precision machining and automation process. In the circular cylinder mold, however, patterns of less than $10{\mu}m$ are difficult to manufacture and maintain. In this study, we fabricated a circular cylindrical mold with a DLC thin film which have high hardness, low coefficient of friction and high releasability by using lithography and lift-off process. The height, line width, and pitch of the fabricated DLC macro pattern are $3.1{\mu}m$, $9.1{\mu}m$ and $20.2{\mu}m$, respectively. The pattern size is finer than the current applied to the aluminum cylinder type, and this shows the possibility of practical use of DLC micro pattern roll mold.
Proteolytic activities were compared using three species involving in squid jeotkal fermentation and showing positive reaction upon casein test : Pseudomonas D2, Flavovacterium odoratum and Acinetobacter calcoaceticus. Pseudomonas D2 produced highest activity of protease at 72h when incubated in our own modified medium(polypeptone, 0.5% ; tryptone, 0.5% ; NaCl, 3% ; pH, 7.5). Thus, this specie was selected for the further study. The growth pattern was coincided with the production of protease. Thus purification of protease was proceeded by ethanol precipitation, sephadex G-100 gel filtration, and DEAE sepharose ion exchange chromatography. The purified protease showed highest activity at pH 7.0 and 5$0^{\circ}C$. The enzyme was very stable over the wide ragnes of the temperature ; even with one hour heat treatment at 7$0^{\circ}C$, the enzyme showed substantial amount of the activity toward casein. In addition, the enzyme was stable over the wide range of pH. Molecular weight of the protease was determined to be 17.4 kD by SDS-PAGE.
In China and South East Asia, the duck (common duck) is important in egg production for human consumption. Plumage color is a breed characteristic and of economic importance, together with egg production. Our aim in this study was to investigate the inheritance of plumage color in three Chinese indigenous egg-type duck breeds, Shan Ma (S), Putian White (F) and Putian black (P), and some of their crossbreds. These three breeds have different plumage color and are used in crossbreeding. The crossbred laying ducks $F{\times}(P{\times}S)$ and $F{\times}(S{\times}P)$ showed highly improved laying ability but heterogeneous plumage color. Genotypes at four relevant loci were investigated by studying down color and pattern in ducklings after crossbreeding. $F_1$ ducklings from the matings $F{\times}S$ and $S{\times}F$, $P{\times}S$, and $S{\times}P$ were classified into four classes of plumage color (the Shan Ma plumage color, black, white, or multicolored) over three generations. Parents were selected for the Shan Ma plumage color of their progeny. In the fourth generation, P male and P female ducks were selected according to the frequency of the desired class of plumage color (Shan Ma) of their $F_1$ progeny to obtain the so-called "Brown Putian Ma duck". The Shan Ma duck genotype was identified as having the restricted mallard color pattern ($M^RM^R$), full expression of any of the patterns or colors (CC), no extended black (ee) and no brown dilution D (D). The Putian White genotype was recessive white (cc), no extended black (ee) and no brown dilution D (D). The Putian Black genotype exhibited full expression of extended black (E gene) and no brown dilution (CCEE D [D]). It was shown that $F{\times}S$ and $S{\times}F$ tests should be implemented to eliminate the recessive white c allele in the S line and the dominant extended black E allele in the F line. It was also shown that the Brown Putian Ma obtained from Putian Black, with no extended black genotype (ee), could be used to get rid of the black plumage (E gene) in the crossbred ducks. This could provide a solution for producing 3-way crossbred ducks Putian $White{\times}$(Putian-$Ma{\times}Shan$ Ma) and Putian $White{\times}$(Shan $Ma{\times}Putian$-Ma), with the desired Shan Ma feather color.
This study aims to analyze middle-aged men's frontal body shape asymmetry by measuring the left and right body dimensions and angles of 388 middle-aged men aged 40 to 59 using 3D body scan data and comparing the measured values. The study also compares the measured values of width, height, and angle and their relationships using Size Korea's anthropometric measurement and posture index of the New York Posture Rating Scale. The results confirm that the asymmetric shape characteristics of the upper and lower body appear differently. In addition, the asymmetrical characteristics between the upper and lower body differed, indicating that the close parts of the body affect each other. Similar to the difference in the left and right frontal body shapes and the average angle distribution, the asymmetrical upper and lower body characteristics also are found to be dissimilar when the correlations are examined. In contrast, there is no asymmetry in the width, height, and angle considering the age and BMI groups. Finally, the study classifies three body types and identifies their asymmetric characteristics. Overall, this study contributes primary data for further research on pattern production for asymmetric and unique body types and the development of customized apparel products.
The purpose of this study is to develop a knitwear design with the potential for practical use through a combination of science and design by examining the concept and formative characteristics of fractal geometry and applying them to the development of 3D virtual clothing knitwear design. This study produced five main conclusions. First, the sub-concepts of "Repeatability," "Scale variability," and "complexity," which are based on self-similarity, appear together with simple regularity in the fractal formative characteristics shown in fashion design. Second, fashion fields apply fractal geometry in three-dimensional surface textures and optical textile patterns as a method of expression. Third, it was confirmed that various expressions can be created with fractal patterns by using the SDS-ONE APEX 3-4 design system; moreover, fractal patterns are a suitable design source for the development of Jacquard knitwear patterns. Fourth, in the development of knitted jacquard fractal patterns, by arranging the patterns in perspective, the effect of emphasizing or reducing the human body by optical illusion was shown. Fifth, a knit Jacquard structure with a pattern that exhibits fractal modeling characteristics and applying it to a 3D virtual clothing sample design reduces the time required for sample production while expanding the knit design's expression area and reducing costs. Thus, the clothing sample confirmed the effectiveness of practical knitwear design development.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.