• 박물관보존과학
• /
• 제31권
• /
• pp.39-54
• /
• 2024

솜포 포장재를 이용해 수작업으로 이루어지는 도자기 포장 기술을 3차원 디지털 기술로의 대체 가능성을 확인해 보고자 하였다. TPU 소재를 이용해 출력한 3D 포장재의 충격 흡수성과 내진동성, 압축 저항성 확인을 위해 복합진동, 포장압축, 포장낙하 시험을 진행하였다. 시험 결과 3D 포장재가 복합진동시험 감쇠비 기준 약 10~20% 증진된 내진동성을 가지고, 약 5배 이상의 압축 저항 성능을 보여주었으며, 6면의 낙하 시험에서 파손되지 않아 충격 흡수 성능도 향상된 것을 확인하였다. 이러한 결과 도자기 포장재의 재사용성을 확보하고 포장 기법을 간소화할 수 있으며, 포장재 및 포장 기술의 다양성을 제시할 수 있을 것으로 판단된다.

• 마이크로전자및패키징학회지
• /
• 제29권4호
• /
• pp.1-8
• /
• 2022

TSV 기술을 포함한 고밀도, 고집적 패키징 기술은 IoT, 6G/5G 통신, HPC (high-performance computing)등 여러 분야에서 중요한 기술로 여겨지고 있다. 2차원에서 고집적화를 달성하는 것은 물리적 한계에 도달하게 되었으며, 따라서 3D 패키징 기술을 위하여 다양한 연구들이 진행되고 있다. 본 고에서는 scallop의 형성 원인과 영향, 매끈한 측벽을 만들기 위한 scallop-free 에칭 기술, TSV 표면의 Cu bonding에 대해서 자세히 조사하였다. 이러한 기술들은 고품질 TSV 형성 및 3D 패키징 기술에 영향을 줄 것으로 예상한다.

• 반도체디스플레이기술학회지
• /
• 제22권4호
• /
• pp.38-47
• /
• 2023

Three dimensional (3D) packaging is a next-generation packaging technology that vertically stacks chips such as memory devices. The necessity of 3D packaging is driven by the increasing demand for smaller, high-performance electronic devices (HPC, AI, HBM). Also, it facilitates innovative applications across another fields. With growing demand for high-performance devices, companies of semiconductor fields are trying advanced packaging techniques, including 2.5D and 3D packaging, MR-MUF, and hybrid bonding. These techniques are essential for achieving higher chip integration, but challenges in mass production and fine-pitch bump connectivity persist. Advanced bonding technologies are important for advancing the semiconductor industry. In this review, it was described 3D packaging technologies for chip integration including mass reflow, thermal compression bonding, laser assisted bonding, hybrid bonding.

• 마이크로전자및패키징학회지
• /
• 제21권2호
• /
• pp.23-29
• /
• 2014

Less power consumption, lower cost, smaller size and more functionality are the increasing demands for consumer electronic devices. The three dimensional(3-D) TSV packaging technology is the potential solution to meet this requirement because it can supply short vertical interconnects and high input/output(I/O) counts. Cu(Copper) has usually been chosen to fill the TSV because of its high conductivity, low cost and good compatibility with the multilayer interconnects process. However, the CTE mismatch and Cu ion drift under thermal stress can raise reliability issues. This study discribe the thermal stress reliability trend for successful implementation of 3-D packaging.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2001년도 The IMAPS-Korea Workshop 2001 Emerging Technology on packaging
• /
• pp.134-141
• /
• 2001

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.357-358
• /
• 2005

Compact power amplifier modules (PAM) for WCDMA/KPCS and GSM/WCDMA dual-band applications based on multilayer low temperature co-fired ceramic (LTCC) substrates are presented in this paper. The proposed modules are composed of an InGaP/GaAs HBT PAs on top of the LTCC substrates and passive components such as RF chokes and capacitors which are embedded in the substrates. The overall size of the modules is less than 6mm $\times$ 6mm $\times$ 0.8mm. The measured result shows that the PAM delivers a power of 28 dBm with a power added efficiency (PAE) of more than 30 % at KPCS band. The adjacent-channel power ratio (ACPR) at 1.25-MHz and 2.25-MHz offset is -44dBc/30kHz and -60dBc/30kHz, respectively, at 28-dBm output power. Also, the PAM for WCDMA band exhibits an output power of 27 dBm and 32-dB gain at 1.95 GHz with a 3.4-V supply. The adjacent-channel leakage ratio (ACLR) at 5-MHz and 10-MHz offset is -37.5dBc/3.84MHz and -48dBc/3.84MHz, respectively. The measured result of the GSM PAM shows an output power of 33.4 dBm and a power gain of 30.4 dB at 900MHz with a 3.5V supply. The corresponding power added efficiency (PAE) is more than 52.6 %.

• 마이크로전자및패키징학회지
• /
• 제27권3호
• /
• pp.21-27
• /
• 2020

The importance of floating photovoltaic systems has recently been emerging to address some issues arising from the installation of conventional ground-mounted photovoltaics. Floating photovoltaics have a few advantages such as cutting down land usage, reducing water evaporation or creating algae. Though there is still necessity to supplement with technical issues: mechanical stability, reliability and long-term durability of floaters and modules. In this paper, we focus the current level of packaging development and introduce research trends that could be applied to next-generation floating photovoltaics.

• 보존과학회지
• /
• 제37권1호
• /
• pp.55-62
• /
• 2021

This study investigated mechanical property changes by measuring compression factors, resilience, and compressive strength according to packaging pattern and filling rate to identify the applicability of cultural heritage packaging using thermoplastic polyurethane elastomers (TPU). Research results indicate that the cross-shaped 3D pattern showed the best resilience when the internal filling rate was 20%, while the octet pattern was the best when the filling rate was either 40 and 60%. The octet pattern had the best mechanical properties and stability with resistance capacities of 20.79 kgf/cm², 40.40 kgf/cm², and 82.23 kgf/cm² at 38%, 39%, and 40% recovery speeds, respectively, depending on the internal filling rate (20, 40, 60%). Based on these results, basic data on the applicability, stability, and reliability of 3D cultural heritage packaging materials using TPU materials were obtained.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.169-170
• /
• 2006

A band pass filter for the V-band application with unique circuit and structure was designed and implemented using 2-metals, 3-BCB layers. In the mean while the effective electrical conductivity of metal layer was extracted and its value was $4{\times}10^7S/m$. The insertion loss of band pass filter at 60 GHz was 3.0 dB and group delay was below 0.1 ns.

• 한국전자통신학회논문지
• /
• 제8권6호
• /
• pp.923-931
• /
• 2013

RFID(Radio Frequency Identification)는 버스카드, 출입문 카드, 물류유통, 건축자재 관리 등 일상생활에서 다양하게 사용되는 태그의 일종으로 ID정보를 무선 주파수(RF, Radio Frequency)를 사용하여 인식하는 무선인식장치이다. RFID는 투과성과 인식률, 메모리 크기, 다중태그 인식률, 외부 오염 먼지, 외부 충격 등에 따라 크기와 성능이 달라지고, 이와 같은 요소들을 고려한 RFID 보호를 위한 패키징이 필요하다. 현재 RFID는 건축자재의 효과적인 관리를 위해서도 다양하게 사용되고 있는데, 건축자재에 RFID를 부착하기 위해서는 외부로 부터의 충격에 강건한 건축자재용 RFID 패키징 제작이 요구되고 있다. 본 논문에서는 외부 충격에 강하고, 고장 시 RFID의 교체가 가능하도록 패키징 틀과 본체를 분리하여 설계된 건축자재용 RFID 패키징을 제안한다. 제안된 RFID 패키징을 위한 상세한 설계도를 제시하였으며, 3D 프린터를 사용하여 설계된 패키징을 직접 제작하여 성능 평가를 실시하였다.