• 한국환경과학회지
• /
• 제7권5호
• /
• pp.679-685
• /
• 1998

The Soysauce wastewater removal characteristics of submerged biofilters filled with two filter media respectively were experimentally examined with constant temperature, pH value and variable BOD loading and recirculation ratio. The decreasing order of BOD removal is Netring(random plastic media), cubic wire meshes(plastic module). This is mainly due to the media characteristics such as void ratio, specific surface area and media shapes. The BOD removal ratio decreases with increasing $BOD_5$/ volumetric loading rate, and the loading rate for the BOD removal over 85% is lower than 1.5kg$BOD_5$ 5/$m^3$d for the plastic media of Netring and cubic wire meshes. The $BOD_5$ removal rate increases with the recirculation ratio, but the rate of increase become smaller as the recirculation ratio increases over 20. When $BOD_5$ volumetric loading is 1.5kg$BOD_5$/$m^3$d, the required recirculation ratio to obtain 85% BOD$_{5}$ removal is about 20 for Netring and it was about 30 for cubic wire meshes.s.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제14권4호
• /
• pp.249-255
• /
• 2014

We present a simple method to watermark three-dimensional (3D) triangular meshes that have been generated from the depth data of the Kinect sensor. In contrast to previous methods, which maintain the shape of 3D triangular meshes and decide the embedding place, requiring calculations of vertices and their neighbors, our method is based on selecting one of the coordinate axes. To maintain shape, we use discrete wavelet transform and constant regularization. We know that the watermarking system needs the information to be embedded; we used a text to provide that information. We used geometry attacks such as rotation, scales, and translation, to test the performance of this watermarking system. Performance parameters in this paper include the vertices error rate (VER) and bit error rate (BER). The results from the VER and BER indicate that using a correction term before the extraction process makes our system robust to geometry attacks.

• 한국측량학회지
• /
• 제36권6호
• /
• pp.499-505
• /
• 2018

지금까지 만들어지고 있는 실내공간데이터는 공간적 활용을 위한 데이터라고 하기 보다는 삼각분할로 표현된 3DS나 COLLADA 형식의 가시화 데이터이다. 의미 있는 공간분석이나 실내응용서비스를 개발하기 위하여서는 단순히 삼각분할로 만들어진 가시화데이터가 아니라 의미적 공간정보가 필요하다. OGC (Open Geospatial Consortium) 표준인 IndoorGML(Indoor Geographic Markup Language)은 가시화가 아니라 실내공간 분석을 비롯한 다양한 응용을 위하여 만들어진 공간데이터 형식이다. 따라서 삼각분할로 표현된 3DS나 COLLADA형식의 실내 공간데이터를 OGC IndoorGML 형식으로 변환하는 것은 중요한 작업이 된다. 본 논문에서는 이 문제를 해결하기 위하여, 삼각분할 형식으로 표현된 원시 실내 공간데이터를 기하, 위상, 그리고 의미적으로 유용한 IndoorGML로 변환하는 방법을 제시한다. 또한 이 변환 방법의 타당성을 위하여 개발된 도구도 함께 소개한다. 실제 데이터를 통한 실험을 통하여 이 방법과 개발된 도구를 검증하였다.

• 한국전산유체공학회지
• /
• 제9권3호
• /
• pp.73-80
• /
• 2004

A LS(Level Set) formulation is developed for computing two-phase flows on non- orthogonal meshes. Compared with the VOF(Volume-of-Fluid) method based on a non-smooth volume-fraction function, the LS method can calculate an interfacial curvature more accurately by using a smooth distance function. Also, it is quite straightforward to implement for 3-D irregular meshes compared with the VOF method requiring much more complicated geometric calculations. The LS formulation is implemented into a general purpose program for 3-D flows and verified through several test problems.

• 한국CDE학회논문집
• /
• 제4권2호
• /
• pp.153-161
• /
• 1999

An atomatic mesh generation scheme with unstructured quadrilateral elements on trimmed surfaces has been developed. Trimmed surfaces are often encountered in modeling of structures with complex shapes such as aircrafts, automobile structures, pressure vessels and etc. For unstructured mesh generation with quadrilateral elements, a domain decomposition algorithm employing loop operators has been used. Mesh generation on trimmed surface is performed in three steps. First, trimmed surfaces with holes or cuts are transformed to th largest projection planes in which the meshes are constructed. The constructed meshes are transformed to the u-v parametric plane and then finally to the original 3D surfaces. Th exact locations of holes or cuts in projection planes are determined by the Newton-Raphson method. Sample meshes are constructed to demonstrate the effectiveness of the proposed algorithm.

• International Journal of Aeronautical and Space Sciences
• /
• 제4권1호
• /
• pp.45-52
• /
• 2003

A three-dimensional aerodynamic shape optimization technique in inviscid compressible flows is developed by using a parallel continuous adjoint formulation on unstructured meshes. A new surface mesh modification method is proposed to overcome difficulties related to patch-level remeshing for unstructured meshes, and the effect of design sections on aerodynamic shape optimization is examined. Applications are made to three-dimensional wave drag minimization problems including an ONERA M6 wing and the EGLIN wing-pylon-store configuration. The results show that the present method is robust and highly efficient for the shape optimization of aerodynamic configurations, independent of the number of design variables used.

• 한국컴퓨터그래픽스학회논문지
• /
• 제7권4호
• /
• pp.1-8
• /
• 2001

삼차원 메쉬 몰핑은 두 개의 입력 다면체로부터, 원형 메쉬(source mesh)로부터 목표 메쉬(target mesh)로 자연스럽게 변하는, 애니메이션을 얻는 것이다. 기존의 메쉬 몰핑 연구들은 기본적으로 메타 메쉬의 생성 및 보간으로 요약할 수 있다. 그러나 메타 메쉬에 기반한 접근 방법들은 몇 가지 단점을 가지고 있다. 중간 메쉬(in-between mesh)가 매우 복잡할 뿐만 아니라, 몰핑 과정에서 연결 관계의 수정이 일어나지 않는다는 점이다. 본 논문은 기존의 방법의 단점을 해결하기 위해 메타 메쉬에 기반하지 않는 새로운 접근 방법을 제시한다. 이 접근 방법은 입력 메쉬의 정점 위치 정보뿐만 아니라, 위상도 동시에 보간함으로써 중간 메쉬를 생성한다. 이 방법을 통해 얻어진 메쉬는 단지 원형 메쉬와 목표 메쉬의 정점만을 포함한다. 추가되는 정점이 없기 때문에 기존 방법으로 생성된 중간 메쉬보다 단순한 중간 메쉬를 얻을 수 있다.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제17권3호
• /
• pp.139-170
• /
• 2013

We extend a p-hierarchical decomposition of the second degree finite element space of N$\acute{e}$d$\acute{e}$lec for tetrahedral meshes in three dimensions given in [1] to meshes with hexahedral elements, and derive p-hierarchical decompositions of the second degree finite element space of Raviart-Thomas in two dimensions for triangular and quadrilateral meshes. After having proved stability of these subspace decompositions and requiring certain saturation assumptions to hold, we construct a local a posteriori error estimator for fem and bem coupling of a time-harmonic electromagnetic eddy current problem in $\mathbb{R}^3$. We perform some numerical tests to underline reliability and efficiency of the estimator and test its usefulness in an adaptive refinement scheme.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.700-705
• /
• 2004

Shell finite elements are widely used for the analysis of thin section objects such as sheet metal parts, automobile bodies and et al. due to their computational efficiency. Since many of input data for finite element analysis are given as solid models or triangulated surface models, one should extract midsurface information from these input data initially and then construct shell meshes on the extracted midsurfaces. In this paper, a method of generating shell elements on midsurfaces directly from input models have been proposed. In order to construct shell meshes, the input models should be triangulated on surfaces first, and then tetrahedral elements are generated by using an advancing front method, and finally mid shell surfaces are obtained from tetrahedral meshes. Some examples are given to demonstrate the efficiency of the proposed method.

• 한국항공우주학회지
• /
• 제35권8호
• /
• pp.677-684
• /
• 2007

본 연구에서는 삼차원 점성 유동을 효율적으로 해석하기 위해 사면체, 프리즘, 피라미드를 포함하는 비정렬 혼합격자계를 기반으로 하는 유동해석코드를 개발하였다. 유동의 지배방정식은 격자점 중심의 유한체적법을 사용하여 공간차분회었으며, 제어테적은 메디안 듀얼(median-dual)방법으로 구성하였다. 난류유동 해석은 Spalart-Allmaras 난류모형과 연계하여 계산되었다. 개발된 해석코드의 정상 유동 검증을 위해 삼차원 날개에 대한 층류, 난류유동을 해석하였으며, 비정상 유동 검증을 위해 조화운동에 의해 진동하는 삼차원 날개에 대한 유동해석을 수행하였다.