• 대한공간정보학회지
• /
• 제14권3호
• /
• pp.47-53
• /
• 2006

본 연구에서는, 보행자의 연속적이고 정확한 위치결정을 위한 보행자 측위시스템의 알고리즘을 소개하고 그 정확도를 분석하였다. 다양한 환경에서의 GPS 신호의 두절에 따른 위치의 불연속성을 해결하기 위하여, GPS, INS, 기압계와 방위계를 강결합의 형태인 중앙 집중형 칼만필터에서 융합하였다. 특히, 저가의 실질적인 시스템을 구성하기 위하여, MEMS IMU를 사용하였고, 실시간 계산의 용이성을 위하여 의사거리를 처리하였다. 이때 저가기기의 선택에 따른 높이와 방위값의 정확도를 보완하기 위하여 압력계와 방위계로부터 측정된 값을 이용한다. 편이, 스케일 오차 등의 상세한 수학적 모델과 융합방법을 소개하였고, 그 결과를 고성능의 GPS/INS 로부터 나온 결과와 비교 검토하였다. 특히 GPS 신호가 단절되었을 경우에 대한 위치 및 자세의 결과 비교를 통하여 위치 획득 정확도 및 가능성을 분석하였고, 향후 연구 방향을 소개하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 1994년도 제3회 학술강연회논문집
• /
• pp.21-26
• /
• 1994

Conventional electroexplosive devices (EED) commonly use a very small metal bridgewire to ignite explosive materials i.e. pyrotechnics, primary and secondary explosives. The use of semiconductor devices to replace “hot-wire” resistance heating elements in automotive safety systems pyrotechnic devices has been under development for several years. In a typical 1 amp/1 watt electroexplosive devices, ignition takes place a few milliseconds after a current pulse of at least 25 mJ is applied to the bridgewire. In contrast, as for a SCB devices, ignition takes place in a few tens of microseconds and only require approximately one-tenth the input energy of a conventional electroexplosive devices. Typically, when SCB device is driven by a short (20 $\mu\textrm{s}$), low energy pulse (less than 5 mJ), the SCB produces a hot plasma that ignites explosive materials. The advantages and disadvantages of this technology are strongly dependent upon the particular technology selected. To date, three distinct technologies have evolved, each of which utilizes a hot, silicon plasma as the pyrotechnic initiation element. These technologies are 1.) Heavily doped silicon as the resistive heating initiation mechanism, 2.) Tungsten enhanced silicon which utilizes a chemically vapor deposited layer of tungsten as the initiation element, and 3.) a junction diode, fabricated with standard CMOS processes, which creates the initial thermal environment by avalanche breakdown of the diode. This paper describes the three technologies, discusses the advantages and disadvantages of each as they apply to electroexplosive devises, and recommends a methodology for selection of the best device for a particular system environment. The important parameters in this analysis are: All-Fire energy, All-Fire voltage, response time, ease of integration with other semiconductor devices, cost (overall system cost), and reliability. The potential for significant cost savings by integrating several safety functions into the initiator makes this technology worthy of attention by the safety system designer.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2017년도 춘계학술대회
• /
• pp.205-206
• /
• 2017

2016년 7000만 달러를 투자해 스마트폰 기반 캐주얼 게임을 각색한 3D 애니메이션 영화 <앵그리버드>가 상영된 후 전 세계적으로 누적 흥행 수입 5.14억 달러를 초과하는 등 큰 성공을 이루었다. 게임을 각색한 영화에서 입소문과 흥행 성적이 모두 좋았던 성공 사례는 매우 드물다. 구체적인 이야기 줄거리, 캐릭터 그리고 세계관이 없는 스마트폰 기반 캐쥬얼 게임을 어떻게 대중들의 사랑을 한 몸에 받는 상업 영화로 각색할 수 있었는지가 본 연구 목적이다. 본 연구는 먼저 스마트폰 기반 캐쥬얼 게임 <앵그리 버드>와 대형 온라인 게임 <와우>에 대해 비교를 진행하여 각색함에 있어서 장단점을 비교하고자 한다. 다음 <앵그리 버드>의 게임과 영화를 비교하여 두 매체 속에 존재하는 핵심요인 간 차이를 분석하고 설문조사를 통한 관객 평가 결과를 참조하여 가장 관객들의 인정을 받는 영화의 요소와 이런 종류의 영화에 대한 관객의 태도는 어떠한지를 알아보고자 한다.

• 대한의용생체공학회:의공학회지
• /
• 제32권2호
• /
• pp.79-84
• /
• 2011

The purpose of this study was to investigate the relevance of the prediction equations derived from the relationship between metabolic energy expenditure and kinetic energy, for different speeds of walking and running over the treadmill. Seven male subjects participated in this study. A tri-axial accelerometer was attached on between the left and right posterior superior iliac spines. Kinetic energy was calculated by the integration of acceleration data and compared with the metabolic energy measured by a gas analyzer. Correlation coefficients were determined to find a relationship between the kinetic energy and the metabolic energy expenditure. Also, the difference between measured and predicted values was used to find the relevance for individual and group equations. Results showed a relatively good correlation between the measured metabolic energy and the calculated kinetic energy. In addition, a dramatic increase in kinetic energy was observed at the transition speed of walking and running (6 km/h). There was no difference in how to predict the kinetic energy expenditure for individual and group even though people have different physical characteristics. This study would be useful to predict metabolic energy expenditures by the regression analysis with acceleration data.

• 수산해양기술연구
• /
• 제34권1호
• /
• pp.52-61
• /
• 1998

We studied behaviour pattern of anchovy (Engraulis japonicus) shoal by a method of shoal echo integration and tested species identification by a method of artificial neural network using the acoustic data collected in the East China Sea in March 1994 and in the southern coastal waters of the East Sea of Korea in March 1995. Between areas, frequency distribution of 10 shoal descriptors was different, which showed characteristics of shoal behaviour in size, bathymetric position and acoustic strength. The range and mean of shoal size distribution in length and height was wider and bigger in the southern coastal waters of the East Sea than in the East China Sea. Relative shoal size of China Sea. Fractal dimension of shoal was almost same in both areas. Mean volume reverbration index of shoal was 3 dB higher in the southern coastal waters of the East Sea than in the East China Sea. The depth layer of shoal distribution was related to bottom depth in the southern coastal waters of the East Sea, while it was between near surface and central layer in the East China Sea. Principal component analysis of shoal descriptors showed the correlation between shoal size and acoustic strength which was higher in the southern coastal waters of the East Sea, than in the East China Sea. Correlation was also found among the bathymetric positions of shoal to some degree higher in the southern coastal waters of the East Sea than in the East China Sea. The anchovy shoal of two areas was identified by artificial neural network. The contribution factor index (Cio) of the shoal descriptors between two areas were almost identical feature. The shoal volume reverberation index (Rv) was showed the highest contribution to the species identification, while shoal length and shoal height showed relatively high negative contribution to the species identification.

• 한국해양공학회지
• /
• 제33권5호
• /
• pp.400-410
• /
• 2019

In this study, the numerical code for the 3D nonlinear dynamic analysis of an SLWR (Steel Lazy Wave Riser) was developed using the lumped mass line model in a FORTRAN environment. Because the lumped mass line model is an explicit method, there is no matrix operation. Thus, the numerical algorithm is simple and fast. In the lumped mass line model, the equations of motion for the riser were derived by applying the various forces acting on each node of the line. The applied forces at the node of the riser consisted of the tension, shear force due to the bending moment, gravitational force, buoyancy force, riser/ground contact force, and hydrodynamic force based on the Morison equation. Time integration was carried out using a Runge-Kutta fourth-order method, which is known to be stable and accurate. To validate the accuracy of the developed numerical code, simulations using the commercial software OrcaFlex were carried out simultaneously and compared with the results of the developed numerical code. To understand the nonlinear dynamic characteristics of an SLWR, dynamic simulations of SLWRs excited at the hang-off point and of SLWRs in regular waves were carried out. From the results of these dynamic simulations, the displacements at the maximum bending moments at important points of the design, like the hang-off point, sagging point, hogging points, and touch-down point, were observed and analyzed.

• 복식문화연구
• /
• 제29권1호
• /
• pp.134-151
• /
• 2021

The aim of this research is to develop a clothing and textiles studio course for preservice home economics teachers applying principles of Project-Based Learning (PBL) and maker education to equip future teachers with the ability to nurture creativity among adolescents. The studio course was developed in the following stages: analysis, design, development, implementation, and evaluation. We concluded that the resulting course met the following objectives extracted from the 2015 revised curriculum of home economics subjects: to promote creative and environmentally-friendly fashion design and styling abilities, gain the ability to use makerspace tools, understand flat pattern making and sewing processes, and develop creative thinking, aesthetic sense, and communication skills. Furthermore, the educational effects of PBL and maker education were confirmed through student comments on the course. Students mentioned the practicality of the material in their actual lives along with their enhanced integration of the subject material, self-directedness, aesthetic sense, ability to learn through trial and error, collaboration and communication, and sharing. Based on results from the implementation and evaluation stages, a clothing and textiles studio course should include the following modules: introduction of terms and tools, submission and sharing of clothing reformation and upcycling techniques, introduction to hand sewing, pouch making, heat-transfer printing, 3D printing, mask making, hat making, vest making, and the final team project on fashion styling. It is important for instructors to provide detailed guidelines on selecting personas for styling, looking for available materials, and selecting materials online.

• Design & Manufacturing
• /
• 제15권4호
• /
• pp.65-71
• /
• 2021

In the early days of laser invention, it was simply used as a measuring tool, but as lasers became more common, they became an indispensable processing tool in the industry. Short-wavelength lasers are used to make patterns on wafers used in semiconductors depending on the wavelength, such as CO2 laser, YAG laser, green laser, and UV laser. At first, the hole of the PCB board mainly used for electronic parts was not thin and the hole size was large, so a mechanical drill was used. However, in order to realize product miniaturization and high integration, small hole processing lasers have become essential, and pattern exposure for small hole sizes has become essential. This paper intends to analyze the characteristics through patterns by exposing the PCB substrate through DMD and polygon scanner, which are different optical systems. Since the optical systems are different, the size of the patterns was made the same, and exposure was performed under the optimal conditions for each system. Pattern characteristics were analyzed through a 3D profiler. As a result of the analysis, there was no significant difference in line width between the two systems. However, it was confirmed that dmd had better pattern precision and polygon scanner had better productivity.

• Safety and Health at Work
• /
• 제11권4호
• /
• pp.537-542
• /
• 2020

Background: Personal protective equipment (PPE) has been designed in such a way to reduce accident rates. Unfortunately, existing PPE is rather ineffective as it is not able to provide warning signals when hazard is around. The integration of intelligent systems is envisaged to increase the efficiency of existing PPE. Methods: This project designed a safety vest incorporated with metal detectors which can provide immediate warning to the field workers when there is metal hazard around. This product has greater freedom of design via smart manufacturing as it involves the assembly of few commercially available parts into a single entity. Briefly, the metal detector is a do it yourself (DIY) kit, and the safety vest is purchasable from any local market. The DIY kit was connected to a copper coil and being sewed into the safety vest. Results: The metal detector induces beeping sound when there is metal hazard around. A total of 121 engineering students were introduced to the prototype before being requested to answer a survey associated with the design. Respondents have rated >3.00/5.00 for the design simplicity, ease of usage, and light weight. Meanwhile, respondents suggested that the design should be further improved by increasing the metal detection range. Conclusion: It is envisaged that the introduction of this smart safety vest will allow the workers to carry out their duties securely by reducing the accident rates. Particularly, such design is expected to reduce workplace accident especially during night time at construction sites where the visibility is low.

• 국제학술발표논문집
• /
• The 3th International Conference on Construction Engineering and Project Management
• /
• pp.276-284
• /
• 2009

As an on-going research project, Zero Net Energy Test Home (ZNETH) project investigates effective approaches to achieve whole-house environmental and energy goals. The main research objectives are (1) to identify energy saving solutions for designs, materials, and construction methods for the ZNETH house and (2) to verify whether ZNETH house can produce more energy than the house uses by utilizing Building Information Modeling (BIM) and energy analysis tools. The initial project analysis is conducted using building information modeling (BIM) and energy analysis tools. The BIM-driven research approach incorporates architectural and construction engineering methods for improving whole-building performance while minimizing increases in overall building cost. This paper discusses about advantages/disadvantages of using BIM integrated energy analysis, related interoperability issues between BIM software and energy analysis software, and results of energy analysis for ZNETH. Although this investigation is in its early stage, several dramatic outcomes have already been observed. Utilizing BIM for energy analysis is an obvious benefit because of the ease by which the 3D model is transferred, and the speed that an energy model can be analyzed and interpreted to improve design. The research will continue to use the ZNETH project as a testing bed for the integration of sustainable design into the BIM process.