• 정보처리학회논문지B
• /
• 제18B권5호
• /
• pp.265-270
• /
• 2011

본 논문에서는 이진화기반 영역분할을 이용한 3D입체영상의 밝기 보정방법을 제안한다. 제안된 방법은 입력된 좌우 3D입체영상 중 우 영상을 이진화를 통한 영역분할을 하고 크기가 작은 영역들은 제거한다. 다음 우 영상의 각 영역들에 대해 대응되는 좌 영상내의 영역을 상관계수(correlation coefficient)를 이용한 정합을 통해 추출한다. 영역단위의 매칭을 할 때 영역들 간의 겹침을 방지하기 위하여 모폴로지 필터로 영역경계에 인접한 일정부분을 제거한다. 그리고 좌우 영상의 영역 간 히스토그램 명세화를 수행함으로써 우 영상의 밝기 보정을 한다. 실험에서 좌 영상으로부터 블록단위 움직임보상으로 우 영상을 생성했을 때 제안한 방법이 블록평균 정합오차가 가장 작은 것을 확인 할 수 있었다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.1205-1206
• /
• 2008

In the conventional floating display system some image distortions might be occurred in the floating image plane, in which a flat screen has been mostly used for providing an adequate input image plane. In this paper, as a new approach to alleviate image distortion problem in a floating display system, a curved screen is suggested by through some computer simulation using an optics design program of Light Tools.

• 한국통신학회논문지
• /
• 제29권4C호
• /
• pp.533-540
• /
• 2004

본 논문에서는 웨이블릿(wavelet) 영역에서 분류 예측, KLT (Karhunen-Loeve transform), 및 3-D SPIHT(three-dimensional set partitioning in hierarchical trees) 알고리즘(algorithm)을 이용하여 인공위성 화상 데이터에 존재하는 대역내 중복성 (intraband redundancy)과 대역간 중복성 (interband redundancy)을 효과적으로 제거하는 새로운 압축 방법을 제안하였다. 대역간 중복성을 제거하기 위해 웨이블린 영역에서의 분류 정보를 이용하여 영역별 대역간 예측을 행한다. 영역별 대역간 예측에 의해 복원되는 화상들은 예측 오차로 인해 원 화상 (original image)과 차 화상 (residual image)을 가진다. 이 차 화상들 간에 존재하는 대역간 중복성을 제거하기 위하여 KLT를 행한다. 웨이블릿 변환 (wavelet transform)과 KLT를 행하여 대역내 및 대역간 크기 순서로 재정렬된 변환 계수들을 3-D SPIHT 알고리즘을 이용하여 부호화 한다. 제안한 방법의 성능 평가를 위해서 다분광 화상 데이터에 대하여 압축 실험을 행하여 제안한 방법이 기존의 방법들 보다 동일한 여러 비트율 (bit rate)에서 평균 PSNR (peak signal-to-noise ratio)이 0.12∼3.83㏈ 향상됨을 확인하였다.

• Journal of International Society for Simulation Surgery
• /
• 제1권2호
• /
• pp.99-102
• /
• 2014

The skull defect can be made after the trauma, oncologic problems or neurosurgery. The skull reconstruction has been the challenging issue in craniofacial fields for a long time. So far the skull reconstruction with autogenous bone would be the standard. Although the autogenous bone would be the ideal one for skull reconstruction, donor site morbidity would be the inevitable problem in many cases. Meanwhile various types of allogenic and alloplastic materials have been also used. However, skull reconstruction with many alloplastic material have produced no less complications including infection, exposure, and delayed wound healing. Because the 3D printing technique evolved so fast that 3D printed titanium implant were possible recently. The aim of this trial is to try to restore the original skull anatomy as possible using the 3D printed titanium implant, based on the mirrored three dimensional CT images based on the computer simulation. Preoperative computed tomography (CT) data were processed for the patient and a rapid prototyping (RP) model was produced. At the same time, the uninjured side was mirrored and superimposed onto the traumatized side, to create a mirror-image of the RP model. And we fabricated Titanium implant to reconstruct three-dimensional orbital structure in advance, using the 3D printer. This prefabricated Titanium-implant was then inserted onto the defected skull and fixed. Three dimensional printing technique of titanium material based on the computer simulation turned out to be very successful in this patient. Individualized approach for each patient could be an ideal way to manage the traumatic patients in near future.

• Journal of International Society for Simulation Surgery
• /
• 제3권1호
• /
• pp.16-21
• /
• 2016

Computed tomography (CT) can completely digitize the interior and the exterior of nearly any object without any destruction. Generally, the resolution for industrial CT is below a few microns. The industrial CT scanning, however, has a limitation because it requires long measuring and processing time. Whereas, 2D X-ray imaging is fast. In this paper, we propose a novel concept of 3D non-destructive inspection technique using the advantages of both micro-CT and dual X-ray images. After registering the master object’s CT data and the sample objects’ dual X-ray images, 3D non-destructive inspection is possible by analyzing the matching results. Calculation for the registration is accelerated by parallel computing using graphics processing unit (GPU).

• 정보처리학회논문지A
• /
• 제13A권4호
• /
• pp.371-380
• /
• 2006

본 논문은 패션 디자인 분야에서 완성된 의상의 모델 사진을 활용해 다양한 원단(직물)을 직접 Draping함으로써 새로운 디자인을 창출할 수 있고 직접 샘플이나 시제품을 제작하지 않고도 시뮬레이션만으로 의상 작품을 확인 할 수 있다. 또한 모델과 원단 이미지에 대한 데이터베이스를 구축하여 실시간으로 Mapping 결과를 확인할 수 있는 시스템을 구현하였다. 그리고 여기에서 추출되는 시제품을 3D 모델에 입혀 시뮬레이션 할 수 있도록 하기 위한 과정으로 우선 여러 옷감 조각들을 이용하여 가상의 3D 인체 모델에 옷을 입히기 위한 의복 시뮬레이션 시스템을 제안한다. 제안된 시스템은 3D 인체 모델 파일과 2D 재단 패턴 파일을 읽어 들인 다음에 mass-spring model에 기반한 물리적 시뮬레이션에 의해 의복을 착용한 3D 모델을 생성한다. 본 논문의 시스템은 사실적인 시뮬레이션을 위하여 인체 모델을 구성하는 삼각형과 의복을 구성하는 삼각형 사이의 충돌을 검사하고 반응 처리를 수행하였다. 인체를 구성하는 삼각형의 수가 매우 많으므로, 이러한 충돌 검사 빛 반응 처리는 많은 시간을 필요로 한다. 이 문제를 해결하기 위하여, 본 논문에서는 Octree 공간 분할 기법을 이용하여 충돌 검사 및 반응 처리 수를 줄이는 방법을 이용하여 사실적인 영상을 생성할 수 있었고, 수초 이내에 가상 인체 모델에 의복을 입힐 수 있었다.

• 한국의류산업학회지
• /
• 제7권1호
• /
• pp.56-62
• /
• 2005

Fancy Yarn has developed diverse textures in fabrics, reducing the time in yarn and fabric production or apparel making in order to develop creative goods. In this study aimed to propose the use of a 4D box system to make fancy yarn shapes with loops, knops and spirals and the like. The change in texture was analysed and simulated to produce a suitable fabric image by using the fancy yarns fabric. The results are as follows. The plain weave, 2/2 basket weave, 2/2 twill weave, 2/2 2 complete broken weaves, and 5 harness sateen weaves were woven and a fabric image formed. In the case of the loop and the knop yarns fabric image, compared to the twisted fabric image the surface was covered by loops or some parts became partially black. In the case of the spiral shape it showed pattern continuity in spiral shapes 1, 2 and 3. The more twisted spirals produced a diamond shaped pattern or a twill line and a herring bone shaped twill line. An evenly distributed black fabric image appeared in 5 harness sateen weave. For the loop shape the broken weave or 5 harness sateen weave was produced; basket weave and broken weave for the knop yarn 1 or knop yarn 2; and for the spiral shape a plain fabric or 5 harness sateen weave were produced much similar to the fabric image. The surface texture of the mapped image compared to the twisted fabric image produces fancy yarn fabric images covered with loops or irregular spots caused by the knop and the spiral. Therefore it is appropriate or suitable for the simulation of tweed or woolen wool fabrics. The fabric image which produced consistent and continuous lines is therefore more suitable for simulations of twill or herringbone fabric images.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2009년도 춘계 종합학술대회 논문집
• /
• pp.157-162
• /
• 2009

컴퓨터의 성능 향상 및 정보 통신 기술의 발달은 출판 산업에도 영향을 주어 전자 자원의 한 형태인 e-Book 시스템이 출현하게 되었다. 이는 텍스트 및 2D 이미지 삽화를 이용한 방식으로, 고품질의 콘텐츠를 원하는 사용자들이 증가하고 있으며, 3D를 활용한 어류도감 등의 다양한 콘텐츠를 원하고 있다. 본 논문에서는 현재의 e-Book 시스템에 3D 애니메이션 객체를 삽입하여 텍스트의 이해도 및 상세 정보의 가독성을 높이고, 몰입감을 증가시키기 위해 e-Book 기법을 적용한 3D 어류 시뮬레이션 시스템을 설계하고 구현한다.

• 한국의류산업학회지
• /
• 제23권2호
• /
• pp.247-260
• /
• 2021

While it is an important element of clothing construction, research has so far been very limited on the similarities between virtual and real clothing in terms of the type of neckline. The purpose of this study is to verify the similarity, accuracy of virtualization, and actuality of neckline, which all play an important role in individual impressions and image formation, and require considerable modification when fitting real samples. A total of 5 neckline models were selected through the analysis of dress composition textbooks. The selected designs were then planned and manufactured in muslin. The specimen clothes were then tested on a female model in her 20s. 2 kinds of virtual bodies were created in order to compare the real and the virtual dressing. The first virtual body was made through an Artec 3D Eva scan of the model, and the other was made by entering the model's measurements in a CLO 3D program. A visual image of the front, side, and back image of both the real and virtual dressing were subsequently collected. The collected images were then evaluated by 20 professional fashion workers who checked the similarity between the real and the virtual versions. The current study found that the similarity between the actual and virtual wearing of the five neckline designs with reality appeared higher with the virtual wearing image using the 3D-scanned body. The results of this study could provide further information on the selection of appropriate avatars to clothing companies that check the fit of clothing by utilizing 3D virtualized programs.

• 로봇학회논문지
• /
• 제4권1호
• /
• pp.74-80
• /
• 2009

This paper presents a remote monitoring and simulation system for a building cleaning mobile robot. It provides a tool of convenient 3D graphical map construction including network camera image viewer and status information of the robot. The 3D map is reconstructed from existing 2D building CAD data with DXF format using OpenGL graphic API. Through this system, it is possible to monitor and control the cleaning mobile robot from remote place. A practical experiment is performed to show the reliability and convenience of the monitoring system. The proposed system is expected to give efficient way of control and monitoring to building cleaning mobile robot.