• The Korean Journal of Nuclear Medicine Technology
• /
• v.15 no.1
• /
• pp.65-69
• /
• 2011

Purpose: Normal pancreas has low uptake rate in $^{18}F$-FDG PET scan. However, it is possible to diagnose malignancy of pancreatic cancer which has high uptake rate. Many studies approve a high prevalence of diabetes in pancreatic cancer and if the blood glucose level (BGL) is over the normal range, FDG uptake will be decreased and there will be inconvenience for patients from the delay time to reduce the high BGL or could cause difficulty to arrange the schedule. Therefore, we studied the relation of BGL and image quality in pancreatic cancer on PET. Materials and Methods: A hundred patients had PET scan. The prevalence of pancreatic cancer and diabetes were evaluated using SPSS ver. 17. The fasting BGL of patients were examined and sorted as diabetes mellitus (DM) group and Non-DM group. For the evaluation, patients were divided into 3 groups (Non-DM, DM; BGL${\geq}7.0mmol/L$, and DM; BGL<7.0 mmol/L). The ROI was drown on Liver and Lung for the PET imaging analysis. Results: Fifty three male and forty seven female were in the patients. The average age was $60.1{\pm}13.5$. There were 36 patients (male: 22, female: 14, 36%) who had pancreatic cancer with DM. There were 15 patients who showed over 7.0 mmol/L in their fasting BGL and 85 patients who showed under 7.0 mmol/L in their fasting BGL. Among the Non-DM, DM; BGL${\geq}7.0mmol/L$, and DM; BGL<7.0 mmol/L, there was not a statistical significance (p>0.05). Conclusion: The prevalence of pancreatic cancer was comparatively high in this study. If the fasting BGL was slightly over the normal BGL, we believe it will not give a severe disturbance when the patients have PET scan. Furthermore, the examination schedule doesn't need to change and the inconvenience from the delay of patients preparation will be reduced.

• Food Science of Animal Resources
• /
• v.26 no.1
• /
• pp.49-57
• /
• 2006

A total of 120 pigs were used to investigate the effect of feeding probiotics on quality properties of pork. About 6 kg pigs were randomly alloted into one or three experimental diet groups (C: commercial diet feed; T1: 0.1% KBC1121 feed; T2: 0.1% YC2000+0.1% KBC1121 feed). Pigs were slaughtered at approximately 110 kg live weight and chemical composition and physico-chemical characteristics were measured in pork loin. Moisture, crude protein and crude ash were not differences among the treatments. However, crude fat content of T2 was significantly higher than that of other treatments. All of dietary probiotic groups showed significantly higher pH than control. WHC was significantly higher in T1 than other treatments. Cooking loss, shear force value and cholesterol content were not differences among the treatments. In meat color, $L^*$ value was not difference among the treatments, but $a^*\;and\;b^*$ value were lower in T1 than other treatments. In textrure properties of cooked meat, brittleness, hardness, gumminess and chewiness value were significantly higher in T1 than other treatments. Sensory evaluation was not difference among the treatments. The myristic, stearic and oleic acid content of T2 were significantly higher than those of other treatments. Whereas linoleic acid was significantly lower than other treatments. Unsaturated fatty acid (UFA) was significantly higher in T1 than T2. Essential fatty acid (EFA) and EFA/UFA were higher in the order of T1 > C > T2. In amino acid composition, total and essential amino acid, aspartic acid, threonine, serine, glutamic acid, valine, isoleucine, leucine and lysine level were lower in T2 than other treatments.

• Korean Journal of Environmental Agriculture
• /
• v.25 no.2
• /
• pp.138-146
• /
• 2006

To understand the status of water quality and work out a suitable countermeasures in Seonakdong watershed which has poor agro- environmental condition because of severe point and non-point source pollution by popularized city and near sea, we investigated the pollution sources and water quality from '03 and '05 and the result were mapped with GIS and RS for end-users's convenient comprehense and conjunction of water quality and geological data. The most degraded tributary was Hogeo stream which was affected directly by highly popularized Gimhae city, the main pollution source of the watershed. The pollution of tributaries in watershed increased the T-N of main body that reached over 4 mg/L during dry season. Pyeonggang stream and the lower part of main water way were suffered from high salt contents induced near sea and the EC value of those area were increased to 2.25 dS/m. The delivered loads of T-N and T-P were largest in Joman river as 56% and 61% of total delivered loads 1mm tributaries because of lots of stream flow. When Management mandate for irrigation water in Seonakdong river watershed was mapped for estimating integrated water quality as the basis of classification of EC and T-N contents in water, Hogeo and Shineo catchments were showed the requiring countermeasures none against nutrients hazard and Pyeonggang catchment was the vulnerable zone against nutrients and salts hazard. As the result, Seonakdong watershed had very various status of water quality by characteristics of catchments and countermeasures for improving water quality and crop productivity safely should changed depend on that.

• Journal of Biomedical Engineering Research
• /
• v.25 no.5
• /
• pp.421-430
• /
• 2004

Clinically, it is almost impossible for a physician to distinguish subtle changes of frequency spectrum by using a stethoscope alone especially in the early stage of thrombus formation. Considering that reliability of mechanical valve is paramount because the failure might end up with patient death, early detection of valve thrombus using noninvasive technique is important. Thus the study was designed to provide a tool for early noninvasive detection of valve thrombus by observing shift of frequency spectrum of acoustic signals with computer aid diagnosis system. A thrombus model was constructed on commercialized mechanical valves using polyurethane or silicon. Polyurethane coating was made on the valve surface, and silicon coating on the sewing ring of the valve. To simulate pannus formation, which is fibrous tissue overgrowth obstructing the valve orifice, the degree of silicone coating on the sewing ring varied from 20％, 40％, 60％ of orifice obstruction. In experiment system, acoustic signals from the valve were measured using microphone and amplifier. The microphone was attached to a coupler to remove environmental noise. Acoustic signals were sampled by an AID converter, frequency spectrum was obtained by the algorithm of spectral analysis. To quantitatively distinguish the frequency peak of the normal valve from that of the thrombosed valves, analysis using a neural network was employed. A return map was applied to evaluate continuous monitoring of valve motion cycle. The in-vivo data also obtained from animals with mechanical valves in circulatory devices as well as patients with mechanical valve replacement for 1 year or longer before. Each spectrum wave showed a primary and secondary peak. The secondary peak showed changes according to the thrombus model. In the mock as well as the animal study, both spectral analysis and 3-layer neural network could differentiate the normal valves from thrombosed valves. In the human study, one of 10 patients showed shift of frequency spectrum, however the presence of valve thrombus was yet to be determined. Conclusively, acoustic signal measurement can be of suggestive as a noninvasive diagnostic tool in early detection of mechanical valve thrombosis.

• Sleep Medicine and Psychophysiology
• /
• v.9 no.2
• /
• pp.106-114
• /
• 2002

Objectives: Daytime sleepiness is a common symptom and is associated with sleep behavior, sleep deprivation, and night shift, etc. It is also one of the most important symptoms of sleep disorders like obstructive sleep apnea (OSA). According to our survey on Korean literature, a few studies have dealt with daytime sleepiness, and we have not been able to locate any study comparing normal subjects with polysomnography-proven sleep disorder patients regarding daytime sleepiness. We aimed at comparing daytime sleepiness among normal healthy daytime workers, medical students being expected to have daytime sleepiness due to chronic sleep deprivation, and patients having sleep disorders diagnosed with polysomnography. We also studied the association between subjective daytime sleepiness and objective polysomnographic findings in patients with sleep disorders. Methods: One hundred three hospital workers, 137 medical students, and patients with sleep disorders were studied. Sleep disorders included OSA, periodic limb movements in sleep (PLMS), insomnia, and narcolepsy. The degree of subjective sleepiness in each group was measured by the Korean version of Epworth sleepiness scale and compared. The relationship between polysomnographic findings reflecting severity of sleep disorder in each patient group and subjective sleepiness was analyzed. As for patients with narcolepsy, the relationship between the mean sleep latency and subjective sleepiness was studied. Results: There was a significant difference of ESS score (F=68.190, dF=5.752, p<0.001) among daytime workers, medical students, and sleep disorder patients. In OSA patient group, the degree of the sleepiness had no significant correlation either with mean O2 satuaration (p=0.062) or with RDI (p=0.807). In PLMS patient group, there was no correlation between periodic limb movement index (PLMI) and subjective sleepiness (p=0.761). In narcolepsy patient group, the subjective sleepiness had no correlation with mean sleep latency measured with MSLT (p=0.055). Conclusion: We found a significant difference of subjective sleepiness among daytime workers, medical students, and patients with sleep disorders. However, no consistent correlation was found between severity of subjective sleepiness and objective polysomnographic findings reflecting severity of each sleep disorder. This research confirms that the evaluation of subjective sleepiness is important clinically, but it cannot substitute the objective measures such as nocturnal polysomnography and MSLT.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1993.06a
• /
• pp.975-976
• /
• 1993

This talk presents the overview of the author's research and development activities on fuzzy inference hardware. We involved it with two distinct approaches. The first approach is to use application specific integrated circuits (ASIC) technology. The fuzzy inference method is directly implemented in silicon. The second approach, which is in its preliminary stage, is to use more conventional microprocessor architecture. Here, we use a quantitative technique used by designer of reduced instruction set computer (RISC) to modify an architecture of a microprocessor. In the ASIC approach, we implemented the most widely used fuzzy inference mechanism directly on silicon. The mechanism is beaded on a max-min compositional rule of inference, and Mandami's method of fuzzy implication. The two VLSI fuzzy inference chips are designed, fabricated, and fully tested. Both used a full-custom CMOS technology. The second and more claborate chip was designed at the University of North Carolina(U C) in cooperation with MCNC. Both VLSI chips had muliple datapaths for rule digital fuzzy inference chips had multiple datapaths for rule evaluation, and they executed multiple fuzzy if-then rules in parallel. The AT & T chip is the first digital fuzzy inference chip in the world. It ran with a 20 MHz clock cycle and achieved an approximately 80.000 Fuzzy Logical inferences Per Second (FLIPS). It stored and executed 16 fuzzy if-then rules. Since it was designed as a proof of concept prototype chip, it had minimal amount of peripheral logic for system integration. UNC/MCNC chip consists of 688,131 transistors of which 476,160 are used for RAM memory. It ran with a 10 MHz clock cycle. The chip has a 3-staged pipeline and initiates a computation of new inference every 64 cycle. This chip achieved an approximately 160,000 FLIPS. The new architecture have the following important improvements from the AT & T chip: Programmable rule set memory (RAM). On-chip fuzzification operation by a table lookup method. On-chip defuzzification operation by a centroid method. Reconfigurable architecture for processing two rule formats. RAM/datapath redundancy for higher yield It can store and execute 51 if-then rule of the following format: IF A and B and C and D Then Do E, and Then Do F. With this format, the chip takes four inputs and produces two outputs. By software reconfiguration, it can store and execute 102 if-then rules of the following simpler format using the same datapath: IF A and B Then Do E. With this format the chip takes two inputs and produces one outputs. We have built two VME-bus board systems based on this chip for Oak Ridge National Laboratory (ORNL). The board is now installed in a robot at ORNL. Researchers uses this board for experiment in autonomous robot navigation. The Fuzzy Logic system board places the Fuzzy chip into a VMEbus environment. High level C language functions hide the operational details of the board from the applications programme . The programmer treats rule memories and fuzzification function memories as local structures passed as parameters to the C functions. ASIC fuzzy inference hardware is extremely fast, but they are limited in generality. Many aspects of the design are limited or fixed. We have proposed to designing a are limited or fixed. We have proposed to designing a fuzzy information processor as an application specific processor using a quantitative approach. The quantitative approach was developed by RISC designers. In effect, we are interested in evaluating the effectiveness of a specialized RISC processor for fuzzy information processing. As the first step, we measured the possible speed-up of a fuzzy inference program based on if-then rules by an introduction of specialized instructions, i.e., min and max instructions. The minimum and maximum operations are heavily used in fuzzy logic applications as fuzzy intersection and union. We performed measurements using a MIPS R3000 as a base micropro essor. The initial result is encouraging. We can achieve as high as a 2.5 increase in inference speed if the R3000 had min and max instructions. Also, they are useful for speeding up other fuzzy operations such as bounded product and bounded sum. The embedded processor's main task is to control some device or process. It usually runs a single or a embedded processer to create an embedded processor for fuzzy control is very effective. Table I shows the measured speed of the inference by a MIPS R3000 microprocessor, a fictitious MIPS R3000 microprocessor with min and max instructions, and a UNC/MCNC ASIC fuzzy inference chip. The software that used on microprocessors is a simulator of the ASIC chip. The first row is the computation time in seconds of 6000 inferences using 51 rules where each fuzzy set is represented by an array of 64 elements. The second row is the time required to perform a single inference. The last row is the fuzzy logical inferences per second (FLIPS) measured for ach device. There is a large gap in run time between the ASIC and software approaches even if we resort to a specialized fuzzy microprocessor. As for design time and cost, these two approaches represent two extremes. An ASIC approach is extremely expensive. It is, therefore, an important research topic to design a specialized computing architecture for fuzzy applications that falls between these two extremes both in run time and design time/cost. TABLEI INFERENCE TIME BY 51 RULES {{{{Time }}{{MIPS R3000 }}{{ASIC }}{{Regular }}{{With min/mix }}{{6000 inference 1 inference FLIPS }}{{125s 20.8ms 48 }}{{49s 8.2ms 122 }}{{0.0038s 6.4㎲ 156,250 }} }}

• Korean Journal of Food Science and Technology
• /
• v.42 no.6
• /
• pp.721-726
• /
• 2010

The objective of this study was to evaluate several varieties of aseptic-packaged cooked rice including Juanbyeo. Quality evaluations, such as by amylose, setback, toyo values and amylograms, were significantly higher in the Juanbyeo as compared to other samples. In addition, the Juanbyeo aseptic-packeged cooked rice showed significantly higher palatability characteristics and had a greater water absorption ratio than the other samples. For cold cooked rice, the relationship between palatability and texture was significantly high (p<0.01). Ilpumbyeo showed high scores for taste as a hot cooked rice, but as a cold cooked rice taste scores were lower than other samples. In the case of Juanbyeo cold cooked rice flavor was improved. When the Juanbyeo aseptic-packaged cooked rice was reheated in a microwave oven, it had better palatability than other varieties. Thus, the results of this study suggested that Juanbyeo can be effectively utilized as aseptic-packaged cooked rice.

• Journal of Yeungnam Medical Science
• /
• v.12 no.2
• /
• pp.210-225
• /
• 1995

The expression of $p62^{c-myc}$ and $p21^{ras}$ can be seen in many solid tumor, but the pattern and incidence of expression were different according to organ, countries, and examiners, thus it is not definitely defined. Total 67 colorectal carcinoma in paraffin sections are analysed by immunohistochemically for evaluation of the $p62^{c-myc}$ and $p21^{ras}$ expression according to the age, sex, chief complaints, location, differentiation, modified Dukes stage, using the specific monoclonal antibodies. The results were summarized as follows : The age of patients ranged from 32 years to 82 years. The mean age was 57.6 years. The expression of $p62^{c-myc}$ and $p21^{ras}$ was not correlated with age. Male was 29 cases(43.3%) and female was 38 cases(56.7%). The male to female ratio was 1:1.31. The expression of $p21^{ras}$ was increased in female(p<0.05). Abdominal pain(43.7%) was the most frequent chief complaint. The most frequent tumor location was rectum(44.8%). The expression of $p62^{c-myc}$ was increased in the rectum(p<0.05). The 65 cases(97.0%) out of 67 cases showed positive reaction of $p62^{c-myc}$ in the nucleus, cytoplasmic membrane, and cytoplasm. The 62 cases(92.5%) out of 67 cases showed positive reaction of $p21^{ras}$ in the cytoplasmic membrane and cytoplasm. The positive rate of $p62^{c-myc}$ and $p21^{ras}$ was 97.0% and 91.4% in well differentiated adenocarcinoma, 100.0% and 95.0% in moderately differentiated adenocarcinoma, 90.0% and 90.0% in poorly differentiated adenocarcinoma, 100.0% and 100.0% in mucinous carcinoma. The positive rate of $p62^{c-myc}$ and $p21^{ras}$ was 94.1% and 88.2% in Dukes stage $B_1$, 96.0% and 96.0% in Dukes stage $B_2$, 100.0% and 100.0% in Dukes stage $C_1$, 100.0% and 88.9% in Dukes stage $C_2$, and 100.0% and 100.0% in Dukes stage D. The expression of $p62^{c-myc}$ in metastatic colorectal carcinoma showed diffuse and strongly positive reaction than primary colorectal carcinoma. The expression of $p21^{ras}$ in primary colorectal carcinoma showed diffuse and strongly positive reaction than metastatic colorectal carcinoma.

• Journal of the Korean Geotechnical Society
• /
• v.38 no.10
• /
• pp.61-74
• /
• 2022

Considering that the number of cases in which a structure foundation is located on weathered rock has been increasing recently, for adequate design bearing capacity of a foundation on weathered rock, allowable bearing capacities of such foundations in geotechnical investigation reports were studied. With reference to the study results, the allowable bearing capacity of a foundation on weathered rock was approximately 400-700 kN/m², with a large variation, and was considered a conservative value. Because the allowable bearing capacity of the foundation ground is an important index in determining the foundation type in the early design stage, it can have a significant influence on the construction cost and period according to the initial decision. Thus, in this study, six large-scale plate-bearing tests were conducted on weathered rock, and the bearing capacity and settlement characteristics were analyzed. According to the test results, the bearing capacities from the six tests exceeded 1,500 kN/m², and it shows that the results are similar with the one of bearing capacity formula by Pressuremeter tests when compared with the various bearing capacity formula. In addition, the elastic modulus determined by the inverse calculation of the load-settlement behavior from the large-scale plate-bearing tests was appropriate for applying the elastic modulus of the Pressuremeter tests. With consideration of the large-scale plate-bearing tests in this study and other results of plate-bearing tests on weathered rock in Korea, the allowable bearing capacity of weathered rock is evaluated to be over 1,000 kN/m². However, because the settlement of the foundation increases as the foundation size increases, the allowable bearing capacity should be restrained by the allowable settlement criteria of an upper structure. Therefore, in this study, the anticipated foundation settlements along the foundation size and the thickness of weathered rocks have been evaluated by numerical analysis, and the foundation size and ground conditions, with an allowable bearing capacity of over 1,000 kN/m², have been proposed as a table. These findings are considered useful in determining the foundation type in the early foundation design.

• Korean Journal of Remote Sensing
• /
• v.39 no.6_1
• /
• pp.1353-1369
• /
• 2023

In the event of a disaster accident at sea, the scale of damage will vary due to weather effects such as wind, currents, and tidal waves, and it is obligatory to minimize the scale of damage by establishing appropriate control plans through quick on-site identification. In particular, it is difficult to identify pollutants that exist in a thin film at sea surface due to their relatively low viscosity and surface tension among pollutants discharged into the sea. Therefore, this study aims to develop an algorithm to detect suspended pollutants on the sea surface in RGB images using imaging equipment that can be easily used in the field, and to evaluate the performance of the algorithm using input data obtained from actual waters. The developed algorithm uses image enhancement techniques to improve the contrast between the intensity values of pollutants and general sea surfaces, and through histogram analysis, the background threshold is found,suspended solids other than pollutants are removed, and finally pollutants are classified. In this study, a real sea test using substitute materials was performed to evaluate the performance of the developed algorithm, and most of the suspended marine pollutants were detected, but the false detection area occurred in places with strong waves. However, the detection results are about three times better than the detection method using a single threshold in the existing algorithm. Through the results of this R&D, it is expected to be useful for on-site control response activities by detecting suspended marine pollutants that were difficult to identify with the naked eye at existing sites.