• Journal of the Korean Home Economics Association
• /
• v.28 no.4
• /
• pp.1.1-13
• /
• 1990

Authors have performed the sensory evaluation tests according to each given items after selecting various lines in order to assess the visual effects by the lines in cloth designing. The evaluations were done by means of ranking tests followed by paired comparison tests. The results obtained were as follows : 1. In the item in than "Shoulder width looks wide", the design C3 showed the best visual effect, and then B1, F8, and A5 comes in order. In "Shoulder width looks narrow", they were A2, F5, F7, and B2 in order. 2. In "Bust looks big", the effect was best in F9, and then B1, F5, C3, and A5 and order. "Bust looks small" item showed A3, C1, and F1 in order. 3. In "Waist looks thick", they were B2, D1, and F7 while in "Waist looks thin", they were B3, F8, and D6 in order. 4. In the item in that "Hip looks big", the best effect was in F9, and then E3, C2, and B4 in order. In "Hip looks small", the best one was C1, and then comes. E1, F6, and F8. 5. In "Upper body looks thick", they were D2, D4, F8, C3 and A5 in order whild in "Upper body looks thin", they were A1, F5, and D7 in order. 6. In the item "Lower body lookds thick", they were F9, C2, E3, B3, and D3 in order. In "Lower body looks thin", the best one was C1, and then D1, E2, F6, and F8 comes in order. 7. In "whole body looks thick", they were F9, F3, D3, and A5, and in "Whole body looks thin", they were F5, A1, C1, and D6 in order. 8. In "Height looks tall", the effects were in order of A4, D6, E1, and F7 while in "Height looks short", they were E3, F9, B4, D2, and D1. 8. In "Height looks tall", the effects were in order of A4, D6, E1, and F7 while in "Height looks short", they were E3, F9, B4, D2, and D1. F9, B4, D2, and D1.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.6
• /
• pp.37-45
• /
• 1998

In this paper, we report the first three-dimensional simulation result of the transient enhanced diffusion(TED) of dopants in the ion-implanted silicon by employing our 3D semiconductor process simulator, INPROS system. In order to simulate three-dimensional TED redistribution of dopants in silicon, the dopant distributions after the ion implantation was calculated by Monte Carlo(MC) method, followed by finite element(FE) numerical solver for thermal annealing. Excellent agreement between the simulated 3D profile and the SIMS data has been obtained for ion-implanted arsenic and phosphorus after annealing the boron marker layer at 75$0^{\circ}C$ for 2 hours. Our three-dimensional TED simulation could successfully explain the reverse short channel effect(RSCE) by taking the 3D point defect distribution into account. A coupled TED simulation and device simulation allows reverse short channel effect on threshold to be accurately predicted.

• Advances in Traditional Medicine
• /
• v.9 no.3
• /
• pp.259-267
• /
• 2009

Curcumin (CMN) is known to have beneficial role in anorexia, coryza, cough, diabetic wounds, and hepatic disorders apart from its inherent antioxidant effects. Therefore, the present study was aimed to evaluate antioxidant effect of CMN in prevention of nephrolithiasis in rats-induced by ethylene glycol (EG) and Vitamin D3 (Vit. D3). Male Wistar rats (175 - 200 g) were randomized in groups like control, EG + Vit. D3 induced nephrolithiatiatic rats, CMN treated rats, CMN + EG + Vit. D3 treated rats, Vit. E + EG + Vit. D3 treated rats. Urine was collected weekly throughout the experimental protocol and estimated for calcium oxalate (CaO) count. After completion of experimental protocol serum was estimated for blood urea nitrogen and creatinine. Both the kidneys were excised and used to evaluate levels of biomarkers of oxidative stress and calcium oxalate crystal deposition by histopathological studies. Administration of EG and Vit. D3 to rats resulted in increased oxidative stress, hyperoxaluria and renal deposition of CaO crystals. Supplementation with CMN improves kidney function, reduces elevated oxidative stress, urinary oxalate level and renal deposition of CaO which shows its protective action in nephrolithiasis. The increased deposition of stone in the kidney and stone forming constituents of nephrolithiatic rats were effectively lowered by treatment of CMN.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.17 no.6
• /
• pp.53-60
• /
• 2018

In this paper, the effect of different 3D printing parameters including laminated angle and annealing temperature is observed their effect on FDM conductive 3D printing. In FDM 3D printing, a conductive filament is heated quickly, extruded, and then cooled rapidly. FDM 3D Print conductive filament is a poor heat conductor, it heats and cools unevenly causing the rapid heating and cooling to create internal stress. when the printed conductive specimens this internal stress can be increase electrical resistance and decrease electrical conductivity. Therefore, This experiment would like to use annealing to remove internal stress and increase electrical conductivity. The result of experiment when 3D printing conductive specimen be oven cooling of annealing temperature $120^{\circ}C$ electrical resistance appeared decrease than before annealing. So We have found that 3D printing annealing removes internal stresses and increases the electrical conductivity of printed specimens. These results are very useful for making conductive 3D printing electronic circuit, sensor ect...with electrical conductance suitable for the application.

• Korean Journal of Weed Science
• /
• v.31 no.4
• /
• pp.368-374
• /
• 2011

This experiment was conducted to Investigate the herbicidal activity of naturally developed d-Limonene on the control of Sicyos angulatus L. which is destructive to biodiversity and ecosystem under greenhouse and open field condition. Among the tested concentrations, most efficacy of early foliar application(leaf stage with 1.5 and 3) of d-Limonene was found in $70mg\;mL^{-1}$, followed by $35mg\;mL^{-1}$, $17.5mg\;mL^{-1}$ in that order under greenhouse condition. The higher the d-Limonene concentration, the better the effect in greenhouse condition. In leaf stage with 2, 3 and 5 under open field condition, the higher the d-Limonene concentrations, the higher the weeding effect. The remarkable effect was, particularly, found in d-Limonene with $70mg\;mL^{-1}$ while little was found in the plants with d-Limonene with $35mg\;mL^{-1}$. In the case of 15 leaf stage of S. angulatus L. treated with d-Limonene under outside treatment effect was low. The treatment effect of d-Limonene under open field compared with greenhouse condition was more significant. It can be recommended that d-Limonene with $70mg\;mL^{-1}$ could control S. angulatus L. by 5 leaf stage.

• Journal of the Korean Geotechnical Society
• /
• v.16 no.1
• /
• pp.117-129
• /
• 2000

This paper discusses the lateral behavior of group pile in homogeneous and non- homogeneous (two layered) soil. In the group pile, the model tests were to investigate the effects on spacing-to-diameter ratio of pile, pile array, ratio of pile spacing, constraint condition of pile tip, eccentric load and ground condition. The group efficiency and lateral deflection induced in active piles were found to be highly dependent on the spacing-to-diameter ratio of pile, number of pile. Lateral bearing capacities in the group piles of fixed tip, in the case of 6D spacing and $3\times3$ array, were 40-100% higher than those in the group pile of free tip. Based on the results obtained, a spacing-to-diameter of 6.0 seems to be large enough to eliminate the group effect for the case of relative density of 61.8% and 32.8%, and then each pile in such a case behaves essentially the same as a single pile. However, in the case of dense sand, it can be estimated that a spacing-to-diameter of 8.0 seems to be large enough to eliminate the group effect. In this study the group efficiency is illustrated in experimental function with spacing-to-diameter, S/D, relative density and number of pile. The distribution of shear force in lead row piles, in the case of 3$\times$3 array group pile, was 41.6-52.4% for 3D spacing and 34-40% for 6D spacing, respectively. The shadowing effect for the parallel direction of lateral loading appears to be more significant than the one for the perpendicular direction of lateral loading.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.30 no.3
• /
• pp.321-330
• /
• 2020

Objectives: The purpose of this study was to compare vitamin D levels, sleep quality, and anxiety symptoms between shift workers and daytime workers and analyze the mediating effect of vitamin D and sleep quality between shift work and anxiety symptoms. Methods: The subjects of the study were 6744 people who received a medical examination while working for an electronics manufacturing company in 2016. We evaluated their shift work, vitamin D levels, sleep quality, and anxiety symptoms with blood samples and questionnaires. Chi-square test, t-test and path statistical analysis were performed. Results: The shift workers had significantly higher symptoms of anxiety than the day workers, significantly lower levels of vitamin D in the blood, and significantly poorer quality of sleep. The results of the pathway analysis confirmed that blood vitamin D and sleep quality had a mediating effect between shift work and anxiety symptoms. Conclusions: Shift workers should be constantly paying attention to mental health effects such as anxiety symptoms. Shift workers should also be alerted of the risk of vitamin D deficiency, encouraged about sun exposure and vitamin D intake, and required to undergo training and counseling on sleep hygiene.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.51-54
• /
• 2008

In this paper, we propose a practical method for displaying 2D/True3D mixed contents in real-time. Many companies released their 3D display recently, but the costs of producing True3D contents are still very expensive. Since there are already a lot of 2D contents in the world and it is more effective to mix True3D objects into the 2D contents than making True3D contents directly, people became interested in mixing 2D/True3D contents. Moreover, real-time 2D/True3D mixing is helpful for 3D displays because the scenario of the contents can be easily changed on playback-time by adjusting the 3D effects and the motion of the True3D object interactively. In our system, True3D objects are rendered into multiple view-point images, which are composed with 2D contents by using depth information, and then they are multiplexed with pre-generated view masks. All the processes are performed on a graphics processor. We were still able to play a 2D/True3D mixed contents with Full HD resolution in real-time using a normal graphics processor.

• Proceedings of the SCSK Conference
• /
• 2003.09b
• /
• pp.174-183
• /
• 2003

To obtain effective and safe topical depigmenting agents, we synthesized hydroxybenzoates, alkoxybenzoates, and 3,4,5-trimethoxycinnamate containing a thymol moiety and screened then for high-level inhibitory activity against melanin synthesis. Among them, 5-methyl-2-(methylethyl)phenyl (2Ε)-3-(3,4,5-trimethoxyphenyl)prop-2-enoate (Melasolv)$^{TM}$ 4h, showed the most potent depigmenting effect ($IC_{50}$/ = 10$\mu$M) with low cytotoxicity ($IC_{50}$/ = 200$\mu$M). To find the inhibition mechanism of our candidate, various in vitro tests were performed such as DPPH assay, tyrosinase activity in mushroom or in culture cell and expression of tyrosinase, TRP-l and TRP-2. The result of this study suggested that 4h inhibited melanin synthesis by reducing the expression of tyrosinase and TRP-l at the transcriptional level in melan-a melanocytes.s.

• Nuclear Engineering and Technology
• /
• v.54 no.1
• /
• pp.374-385
• /
• 2022

In order to investigate the application of 3D base-seismic isolation system in nuclear power plants (NPPs), comprehensive analysis of constitution and design theory for 3-dimensional combined isolation bearing (3D-CIB) was presented and derived. Four different vertical stiffness of 3D-CIB was designed to isolate the nuclear island (NI) building. This paper aimed at investigating the isolation effectiveness of 3D-CIB through modal analysis and dynamic time-history analysis. Numerical results in terms of dynamic response of 3D-CIB, relative displacement response, acceleration and floor response spectra (FRS) of the superstructure were compared to validate the reliability of 3D-CIB in mitigating seismic response. The results showed that 3D-CIB can significantly attenuate the horizontal acceleration response, and a fair amount of the vertical acceleration response reduction of the upper structure was still observed. 3D-CIB plays a significant role in reducing the horizontal and vertical FRS, the vertical FRS basically do not vary with the floor height. The smaller the vertical stiffness of 3D-CIB is, the better the vertical isolation effectiveness is, whereas, it will increase the displacement and the rocking effect of superstructure. Although the advantage of 3D-CIB is that the vertical stiffness can be flexibly adjusted, it should be designed by properly accounting for the balance between the isolation effectiveness and displacement control including rocking effect. The results of this study can provide the technical basis and guidance for the application of 3D-CIB to engineering structure.