• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2002.10a
• /
• pp.89-92
• /
• 2002

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2003.04a
• /
• pp.365-368
• /
• 2003

In this study, we get a digital imagery about the objective road and visualize it as three dimensional so called 3D. That is to say that we manage the road trough computerized data or 3D and we can expect to get efficiency of the human resources and economical, timely efficiency which is needed to maintain and manage the road.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2003.10a
• /
• pp.219-224
• /
• 2003

Recently, the number of the use of Digital Photogrammetry is increasing, the Digital Photogrammetry is used for the acquisition of images, remote sensing and three dimension location. Especially, the three dimension location is more activated to use digital camera for the Digital Photogrammetry. The reason is that it is cheap and easy to use and also it has high confidence. Using non-metric digital camera not metric camera, in this research, to get images and apply the images to the Direct Liner Transformation which is one of the techniques in Digital Photogrammetry to get three dimensional location of a point. Ⅰ programmed the procedure with Visual C++ to get the position of points speedly and I tested possibility whether it can analyze the displacement and the existence of structure with measurement system which is structured by a inexpensive non-metric digital camera.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2003.11a
• /
• pp.526-528
• /
• 2003

There are some reports which are about measuring the discontinuity from 3D model of rock surface. To generate 3D model is mainly based on remote sensing technique like laser scanning and digital stereo photogrammetry. It is obtained the DEM of the rock slope using above techniques in this study, and examined a suitability and improvement of the photogrammetry for the rock slope by overlap the DEM. It seems that accuracy of DEM generated by photogrammetry technique is influenced by the geometry of rock and type of joint.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.11a
• /
• pp.137-142
• /
• 2004

Recently. the number of the use of Digital Photogrammetry is increasing, and photogrammetry instruments are developing rapidly and the pression is improving continuously. In this study, using the Rollei d7 metric that is a measurement digital camera which has capacity of keeping numerial value by itself and easy carrying, we analyze the 3 dimensional hydraulic experiment model. First, we calculated RMSE by carrying out bundle adjustment. Second, we try to find a effective 3D DEM with the Kriging Interpolation, Third make a comparative study the DEM of the Triangulation with the DEM of the close-range digital photogrammetry.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.20 no.2
• /
• pp.191-197
• /
• 2002

Recently, with the eye-opening progress in the related field of computer, the development of high resolution digital camera enables more precise positioning in digital photogrammetry, and a lot of interest has been concentrated on its application. In this study, the algorithm and system which enable the measurement of 3D point more easily was developed by image pointing method using digital image, when the digital map of the Cultural Properties of Architectures in Modern Ages is drawn by photogrammetry. As a result, we can reduce the limitation of surveying control point, exposure condition, and construct the digital map and 3D model of architecture more efficiently.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.4D
• /
• pp.545-553
• /
• 2009

This paper describes the result of study on measurement of displacement of structure by means of non-contacting method, close-range digital photogrammetry using digital camera. To apply close-range digital photogrammetry to displacement measurement of structure, correction of lens distortion that interferes geometrical analysis has been carried out and then measuring displacement was performed on load regulated-rahmen. For enhanced applicability of displacement measurement, MIDAS which is a structural analysis program was used for modeling and the result was taken from comparative analysis. As a result of the study, it is showed that close-range digital photogrammetry could supplement several weaknesses of LVDT and cable displacement meter and, especially, economy in the perspective of measuring time could be realized. Close-range digital photogrammetry using digital camera can be applied to the area where requires visual analysis such as 3D modeling of structure, profile replication of measurement of structure as well as measurement of displacement of structure.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2003.04a
• /
• pp.151-159
• /
• 2003

This study presents method for self-calibration of the SEM(Scanning Electron Microscope) stereo image using the standard microprobe with same grid pattern and using parallel and central perspective projection equation. Result showed that parallel projection method is more suitable for standard microprobe. The maximum error of 3D coordinates acquired by this method did not exceed 5 $\mu\textrm{m}$, and DSM(Digital Surface Model) for three dimensional measurement of the rock sample was generated by the digital photogrammetry. This result can be used for quantification of micro scale change of shape and analysis of the micro morphology of rock due to weathering.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.19 no.2
• /
• pp.147-154
• /
• 2001

The development of equipments which are for the collection and processing of digital images in digital photogrammetry is actively performed at the research about practical use. The close-range digital photogrammetry is widely using to determine accurate position, feature, and size of objects. The goal of this study is to judge the precise surveying possibility of a streamline object, like a vehicle, using digital close-range photogrammetry. The standard deviation of the calculated coordinates is respectively ${\sigma}_x$=0.434mm, ${\sigma}_y$=0.619mm, ${\sigma}_z$=0.387mm. The result values is enough to converge an accuracy required for the field of an automobile design. Therefor we suggest that the digital close-range photogrammetry could be use for the majority of industries.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2010.04a
• /
• pp.249-250
• /
• 2010

The study aims to propose a method that shall rapidly acquire 3D spatial information of the frequently changing city areas by using the low altitude aerial images taken by the UAV. The artificial 3D model of the artificial structures was constructed using the aerial image data photographed at the test area, calibration data of the non-metric camera and the results of the ground control point survey. Also, the digital surface model was created for areas that were changed due to a number of civil works. Through the above studies, the possibilities of constructing a 3D virtual city model, renewal of 3D GIS database, abstraction of changed information in geographic features and on-demand updating of the digital map were suggested.