• 태양에너지
• /
• 제9권3호
• /
• pp.25-36
• /
• 1989

It is necessary to estimate the regression coefficients in order to predict the monthly mean daily global radiation on a horizontal surface. Therefore many different equations have proposed to evaluate them for certain areas. In this work a new correlation has been made to predict the solar radiation for any area over Korea by estimating the regression coefficients taking into account latitude, percentage of possible sunshine, and cloud cover. Particularly, the single linear equation proposed by Page & Garg shows reliable results for estimating the global radiation with average deviation of -1 to 3% from the measured values.

• Journal of Biosystems Engineering
• /
• 제19권1호
• /
• pp.3-8
• /
• 1994

An experiment on the expression and dewatering of chinese cabbage was conducted in order to investigate its dewatering behavior. Chopped cabbage was packed into cylinder and pressed by piston upto the predetermined pressure on Instron-1000. The rates of dewatering were affected domintantly by the applied pressure, but not significantly by the packed amount of cabbage in the cylinder. The pressure effect was increased very abruptly at first, but the increase rate was very low at high pressure greater than 20 MPa, showing great deviation from linear dependence of flow rate on pressure in Darcy's Law. Therefore, water expression from cabbage was not Newtonian flow of water through cell wall. In fact, the squeezed water contained a lot of solid particles, about 3% of solid cabbage particles, showing destruction of cell wall. It appeared that compression and dewatering of vegetable wastes in the low pressure. under 20 MPa, is more desirable for later treatment of the dewater. More researches are needed in order to develop a treatment method for the solid particles in the expressed water before an expeller treatment system can be applied to vegetable wastes.

• Architectural research
• /
• 제20권3호
• /
• pp.75-82
• /
• 2018

The aim of the study is to evaluate the concrete shear strength and structural behavior of two general beams and eight shape memory alloys (SMAs)-reinforced beams under the flexural test. This work compares the existing reference formula for concrete shear strength with test result to provide the basic data for the design of highly intelligent reinforced concrete (hereinafter, HIRC) beams. The evaluation of the concrete shear strength was performed with effective depth (d=65, 70, 80), SMA diameter change (ø=2.0, 2.5) as the main variables of the specimens. For the relationship between the effective depth and the $V_{\exp}/V_{cal}$, the test result shows that the concrete shear strength gradually approaches 1.0 as the effective depth length increase. For the AIJ formula, the specimens are approached evenly for comparison between $V_{\exp}/V_{cal}$ and the by-product (garnet, fly-ash) reinforced specimen; however, other formulas indicate a deviation.

• 태양에너지
• /
• 제20권3호
• /
• pp.21-30
• /
• 2000

It is necessary to estimate the regression coefficients in order to predict the monthly mean daily global radiation on a horizontal surface. Therefore many different equations have proposed to evaluate them for certain areas. In this work, a new correlation has been made to predict the solar radiation for any area over Korea by estimating the regression coefficients taking into account percentage of possible sunshine, and cloud cover. Particularly, the multiple linear regression model proposed shows reliable results for estimating the global radiation with average deviation of -1 to 3 % from the measured values.

• 한국태양에너지학회 논문집
• /
• 제22권3호
• /
• pp.21-30
• /
• 2002

Images taken by geostationary satellite may be used to estimate solar irradiance fluxes at earth's surface. It is based on the empirical correlation between a satellite derived cloud index and the irradiance at the ground. For the validation. estimated solar radiation fluxes are compared with observed solar radiation fluxes at 16 sites over the Korean peninsular from January 1982 to December 2000. Estimated solar radiation fluxes show reliable results for estimating the global radiation with average deviation of -5.6 to +2.8% from the measured values and the yearly averaged horizontal global insolation of Korean peninsula was turned out to be $3.038kcal/m^2.day$.

• 약학회지
• /
• 제28권1호
• /
• pp.21-23
• /
• 1984

High performance amino acid analyzing method has been developed for the routine analysis of taurine in preparations. Ion-exchange resin #2619 Hitachi Custom Ion-Exchange Resin, $2.6(I.D.){\times}150$(length)mm was used as column, buffer I, pH 3.3 as mobile phase. The retention time of taurine was 7 minutes. Calibration curve by peak height for standard taurine was linear from 2.5ppm to 25ppm. The reproducibility showed relative standard deviation $\pm$1.9% when analyzed 10 times for standard solution. The samples could be continuously analyzed without regenerating the resin between samples. Five samples were applied to column every 12 min. and then the resin was regenerated for 30 min. during one analyzing cycle time, 90 min. The automatic amino acid analyzer has made it possible to assay multiple samples in a relatively short period of time using the analytical magnetic program card. The high sensitivity and specificity of the analytical column of the automatic amino acid analyzer permits the routine analysis of taurine in preparations.

• 한국정밀공학회지
• /
• 제12권4호
• /
• pp.119-126
• /
• 1995

This paper presents a non-contact measuring system using one point measuring method to measure surface profiles of dies and clay models for practical use in the field of production engineering. The system has a laser beam probe similar to a measuring probe in a contact measuring system and CCD linear sensor used to detect 300mm measurement range, displacement of measured surfaces, from an origin. There is no mechanical interference between this measuring system and a measured surface in this system. In this measuring system, it was needed 500-600ms including data processing time to measure one point. The experiments showed that the standard deviation was 800 .mu.m and the reproducibility was also 100-210 .mu. m.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제31권2호
• /
• pp.143-149
• /
• 2005

Objects : With the advancement of tissue engineering techniques, the effort to develop bioartificial mucosa have been actively delivered. The problem we met with this technique is the lack of mechanical strength between kerationocyte layer and dermal layer, where in the normal skin and mucosa, they are tightly bound with rete ridge structure. The purpose of this study is to understand the 2D and 3D structure of rete ridge of mucosa and skin paddle for rendering more biomimetic structure to the artificial mucosa. Materials and Methods : Oral mucosa and skin from the patients who received the oral surgery and maxillofacial reconstruction were harvested. The epidermis was separated from the dermis after treating with dispase for 12-16 hours. H&E staining was performed for 2D(dimensional) structure study and confocal LASER and SEM study were performed for 3D structure. Mean height(Sc) and arithmetic mean deviation(Sa) of all surface height were calculated. Results : The average height of rete ridge of skin flap was between $67.14{\mu}m$ and $194.55{\mu}m$. That of oral mucosa was between $146.26{\mu}m$ and $167.51{\mu}m$. Pressure bearing area and attached gingiva of oral mucosa showed deeper rete ridges. Conclusion : To obtain the adequate strength of artificially cultured keratinocyte skin and mucosa flap, it is necessary to imitate the original skin and mucosa structure, especially rete ridge. Through this study, 2D and 3D rete ridge structure of normal mucosa and skin was obtained. These results can be used as basis for substrate morphology for keratinocytes culture.

• Radiation Oncology Journal
• /
• 제18권2호
• /
• pp.107-113
• /
• 2000

목적 : 간암의 3차원 입체조형치료계획시 electronic portal imaging device (EPID)를 이용한 검증영상으로 경계여유 결정에 필요한 객관적 기초자료를 얻으므로써 방사선치료의 정확성을 높이고 본 기기를 이용하여 방사선치료의 정도관리 측면에서의 유용성을 알아보고자 하였다. 대상 및 방법: 10명의 간암 환자에서 EPID를 이용하여 1회 방사선 치료 중 약 4극회의 검증영상을 획득하였고 총 10회 분할 치료기간 동안 반복하여 시행하였다. 방사선치료 자세 고정시 발생할 수 있는 각 개인의 자세 오차를 구하여 치료간 발생하는 환자의 위치 이동을 분석하였고, 호흡으로 인한 간의 상하 움직임의 정도를 측정하여 계획용표적체적(Planning Target Volume, PTV)의 결정시 필요한 적정 경계 여유를 구하였다. 결과 : 검증영상 분석 결과 간암의 치료시 자세이동에 의한 자세 오차는 x축으로 3.0 mm, 표준편차는 1.70 mm 였고 y축으로 3.7 mm, 표준편차 1.88 mm 였다. 따라서 각 축을 중심으로 5 mm 이내였다. 또한 호흡에 의한 간의 상하 운동 범위는 평균 8.63 mm이었고 표준편차는 1.48 mm 였다. 따라서 계획용표적체적 결정시 종양에 적어도 15 mm의 경계여유가 더 필요하다 결론 : EPID는 3차원 입체조형치료계획시 종양의 경계여유 결정에 매우 유용하며 나아가서 방사선치료의 정도관리에도 크게 기여할 것이다

• 한국의학물리학회지:의학물리
• /
• 제14권1호
• /
• pp.34-42
• /
• 2003

World Wide Web (WWW)에서 Virtual Reality Modeling Language (VRML)를 이용하는 3차원 (3D) 디스플레이는 사용자에게 직관적인 정보를 더 효과적으로 제공해 준다. 웹을 기반으로 하는 해부학적 영상과 융합되는 기능적 영상의 3D 가시화는 아직까지 체계적인 방식으로 연구가 활발히 진행되지 않았다. 이 연구의 목적은 2D 영상들과 함께 웹에서 VRML을 이용하여 구현되는 3D 해부학적 표면 영상들과 기능적 표면 영상들을 동시적으로 관찰할 수 있게 하고 VRML을 통해 만들어진 거리 측정 도구를 가지고 관심영역의 공간적인 위치 정보를 제공하는 것이다. 본 연구에서는 한 명의 간질 환자로부터 Magnetic Resonance (MR) 축면 영상과 발작기 및 발작간기 Single Photon Emission Computed Tomography (SPECT) 축면 영상들을 각각 획득하였다. 발작 진원지의 확인을 향상시키기 위해서 subtractionictal SPECT coregistered to MRI (SISCOM)을 수행하였다 SISCOM 결과로 나타난 각 2D 영상들은 모든 voxel들의 평균값 위로 1-표준편차와 2-표준편차에 해당하는 문턱 이상의 영상 값을 갖도록 하였다. SISCOM으로 나타나는 간질 발작 진원지들과 MRI 영상에서 회색질, 백색질 및 뇌척수액의 경계들을 각각 분할하고 marching cube 알고리즘에 의해 VRML 표면 영상들로 나타내었다. 축면 영상에서 실제 거리를 나타내는 x, y축의 길이를 획득하고 z축선의 길이를 계산하였다. VRML을 이용한 거리 측정도구를 만들어 이전의 VRML 표면 영상들과 융합하였다. MRI 영상을 이용하여 3D 표면 영상들의 단면을 나타내고 3D 표면 영상들의 투명도를 설정하기 위해 Java Script 루틴을 사용자 인터페이스 도구로서 삽입하였다 웹 페이지에서 구현되는 3D 표면 영상들의 투명도와 관찰 위치를 조절함에 따라 모델들 사이의 공간적인 정보를 직관적으로 알 수 있었다. 간질 발작 진원지에 대응하는 해부학적 구조를 3D 표면 영상들을 가로지르는 MRI 평면 영상들을 통해서 확인하였다 간질 발작 진원지는 뇌의 오른쪽 측두엽에서 나타났고 공간적으로 발작 진원지의 실제 위치를 VRML 거리 측정 도구에 의해 알 수 있었다. 결론적으로 본 연구에서 제시하는 웹에 근거한 3D 융합 영상의 가시화와 위치 측정은 진단 및 치료 방사선학과 외과학 등의 분야에서 온라인 방식의 연구와 교육에 있어 많은 도움을 줄 것이다.