• The Journal of the Korea Contents Association
• /
• v.18 no.7
• /
• pp.628-634
• /
• 2018

In an examination of the temporomandibular joint disc, MRI(Magnetic Resonance Imaging) is a useful method, and it is necessary to conduct an examination with one's mouth open for a long time to observe the accurate position change of the disc. Thus, this study would produce a TMJ device, using the 3-D printing technology, which would maintain the state of opening the mouth and would evaluate its usefulness as compared to the existing fixed device. As compared to the image using the existing TMJ device, the image taken with the self-produced TMJ device with a 3-D printer showed a somewhat lower SNR, but there was no defect for a clinical use. It is judged that benefits to costs would increase, since it can be customized for the individual patient and can contribute to the production of similar tools by utilizing the 3-D printing technology.

• Industrial Engineering and Management Systems
• /
• v.9 no.3
• /
• pp.251-261
• /
• 2010

This article demonstrated the application of the Fuzzy Data Envelopment Analytical Hierarchy Process (FDEAHP) to evaluate the root causes of critical defect problems occurring in the production of liquid medicine. The methodology of the research began by collecting the defect data by using Check Sheets, and ranking the significant problems by using a Pareto Diagram. Two types of major problems were found to occur, including glass fragments in the medicine and damaged lid threads. The causes of each problem were then analyzed by using Cause and Effect Diagrams. The significant causes were ranked by FDEAHP under three criteria, Severity (S), Occurrence (O) and Detection (D), followed by the framework of the FMEA Technique. Two causes with the highest Final Weight (FW) of each problem were selected to be improved, such as installing auxiliary equipment, using the Poka-Yoke system, setting the scale of the shaft and lathing the bushes of each bottle size. The results demonstrated a reduction in defects from 3.209% to 1.669% and showed that improving a few significant root causes, identified by an experienced decision maker, was sufficient to reduce the defect rate.

• Journal of Yeungnam Medical Science
• /
• v.12 no.1
• /
• pp.105-112
• /
• 1995

During the period of 9.5 years from September, 1985 to March, 1995, 32 cases with spontaneous closure in simple ventricular septal defect(VSD) were observed and evaluated at Yeungnam University Hospital, and those were confirmed by 2D-echocardiogram. The results were as follows: 1. Among these 32 cases, there were 23 cases(71.9%) of perimembranous VSD, 8 cases(25.0%) of muscular VSD and 1 case(3.1%) of subarterial VSD. Septal aneurysms appears to be main mechanism of spontaneous closure of VSD because of the presence of septal aneurysm in all cases with spontaneous closure of a perimembranous VSD. 2. The size of the defect was variable in diameter, but 27 cases(81.2%) were less than 5 mm. 3. The mean age was 12.1 months at spontaneous closure with the range from 1 month old to 72 months. 4. The mean weight was 9.0 kg at spontaneous closure. 5. Among these 32 cases, 3 cases had the clinical evidence of cardimegaly or congestive hert failure during infancy. 6. Male to female sex ratio was 1.5:1.

• Journal of the Korean Ceramic Society
• /
• v.47 no.2
• /
• pp.99-105
• /
• 2010

The electrical transport properties of mayenite ($Ca_{12}Al_{14}O_{33}$ or $12CaO{\cdot}7Al_2O_3$; mostly abbreviated as $C_{12}A_7$) can be controlled in a wide range by varying the oxygen deficiency: At high temperatures mayenite becomes either an oxygen solid electrolyte, a mixed ionic/electronic conductor or an inorganic electride with metal-like properties upon chemical reduction (removing oxygen). The underlying defect chemistry can be understood on the basis of a relatively simple model-despite the complex cage structure: A point defect model based on the assumption that the framework $[Ca_{12}Al_{14}O_{32}]^{2+}$ acts as a pseudo-donor describes well the high temperature transport properties. It accounts for the observed conductivity plateau at higher oxygen activities and also describes the experimentally observed oxygen activity dependence of the electronic conductivity with -1/4 slope at temperatures between 800 and $1000^{\circ}C$. Doping effects in mayenite are still not well explored, and we review briefly the existing data on doping by different elements. Hydration of mayenite plays a crucial role, as Mayenite is hygroscopic, which may be a major obstacle for technical applications.

• Archives of Plastic Surgery
• /
• v.38 no.3
• /
• pp.222-227
• /
• 2011

Purpose: Autogenous particulate bone grafting is a type of autogenous bone graft that consists of small particles of cortical and cancellous bone. Autogenous particulate bone grafting has been used for calvarial bone defect after calvarial defect of craniosynostosis and prevention of temporal depression after fronto-orbital advancement. The results were followed up and studied for effectiveness of autogenous calvarial particulate bone grafting. Methods: Cranial vault remodeling and fronto-orbital advancement was performed for six craniosynostosis patient from August 2005 to October 2007. Autogenous particulate bone grafting was harvested from endocortex of separated cranial vault and if insufficient, from extocortex of occipital region using Hudson brace & D'Errico craniotomy bit and was grafted on the calvarial bone defect of cranial vault and temporal hollow. Fibrin glues were added to the harvested particulated bone for adherence and shaping of paticles. Results: Autogenous particulate bone grafting was followed-up at least longer than I year. The calvarial bony defects following primary cranial remodeling were successfully covered and postoperative temporal depressions after fronto-orbital advancement were also well prevented by grafted particulated bone. Conclusion: Autogenous calvarial particulate bone graft can be harvested in infants and young children with minimal donor site morbidity. It effectively heals cranial defects in children and during fronto-orbital advancement reduces the prevalence of osseous defects independent of patient age. It's easy and effective method of reconstruction of calvarial defect.

• Archives of Plastic Surgery
• /
• v.35 no.4
• /
• pp.413-418
• /
• 2008

Purpose: When choosing dressing method to treat skin defect by second degree or higher burn, we have to consider method of rapid epithelization and minimization of pain during the treatment. In this study, we used biologic dressing with cultured allogenic keratinocytes for skin defect due to burn. We followed up the degree of epithelization, the degree of pain, and patient satisfaction. Methods: From June 2003 to June 2006, among the patients with skin defect due to burn, 31 cases with second degree burn(moderate to severe) were selected and biological dressing with cultured allogenic keratinocytes were done. 21 cases did not use cultured allogenic keratinocytes. Most of the patients had second degree burn. We applied cultured allogenic keratinocyte by Kaloderm. For wounds that were not deep enough to effect the dermis, escharectomy was done before applying Kaloderm. After the operation, moist wound site was maintained by dressing with saline gauze for 5 - 7 days. We compared the condition of the wound site before and after applying Keloderm by grading epithelization by standardized percentage scoring scale(1 - 5), and degree of pain and patient satisfaction by visual analogue scale(0 - 10). Results: When cultured allogenic keratinocytes were applied for the same period of time, the mean score of epithelization were $3.29{\pm}0.529$(mean ${\pm}$ S.D.). Without the application, the mean score of epithelization were $2.86{\pm}0.655$(mean ${\pm}$ S.D.). The degree of pain was $7.71{\pm}1.419$(mean ${\pm}$ S.D.) and $2.35{\pm}0.950$(mean ${\pm}$ S.D.) before and after the application, respectively. The patients' satisfaction score was $6.45{\pm}0.850$(mean ${\pm}$ S.D.) and $8.45{\pm}0.961$(mean ${\pm}$ S.D.) before and after the application, respectively. Conclusion: Applying biological dressing with cultured allogenic keratinocyte to skin defect due to second degree burn showed satisfactory results in the degree of the epithelization, degree of pain and patients' satisfaction.

• Journal of Chest Surgery
• /
• v.18 no.2
• /
• pp.139-150
• /
• 1985

From 1977 through 1984, 97 patients of V.S.D. were treated surgically at Department of Thoracic and Cardiovascular Surgery, Korea University college of Medicine. Among 97 patients, 3 patients were treated by PDA ligation, 3 patients were treated by PDA ligation and subclavian flap aortoplasty, 1 patient were treated by pulmonary artery banding. All of the above patients were analyzed clinically. The results were as follows; 1. Of the patients, 52 patients were male [55.5%] and 45 patients were female [44.5%]. Their age ranged from 7 days to 32 year, and the mean age was 9 year of age and 28.9% of patients were between 4 and 8 year of age. 2. The most common clinical symptoms were frequent U.R.l. and D.O.E.. 3. The most common chest PA findings were cardiomegaly and increased pulmonary vascularity. 4. Associated anomaly was founded in 27 cases and PDA was most common associated anomaly and others were A.S.D., pulmonary stenosis, aortic regurgitation, D.C.R.V.. 5. Pulmonary hypertension was founded in 37 patients and it`s incidence was increased by patient age and shunt amount. 6. On Kirklin`s anatomical classification, type 11 defect was most common [45.5%], and type 1 was 35.5%, and type 111 was 4.4%, and type 1V was 4.4%. 7. Mean E.C.C. time was 69.1 min. and varied by closing method and associated anomaly as in case of simple closure; 47.8 min., in case of patch closure; 77.2 min., in cases with associated anomaly; 92.7 min.. 8. Mean postoperative ventilatory assisted time was 7.3 hour and varied by preoperative pulmonary artery pressure and E.C.C. time, as the group with pulmonary hypertension; 10.5 hour, the group without pulmonary hypertension; 5.5 hour, the group of short E.C.C time [within 1 hour]; 4.4 hour, the group of long E.C.C. time [over 1 hour]; 8.4 hour. 9. Overall operative mortality was 9.3% [9 cases].

• Applied Microscopy
• /
• v.39 no.4
• /
• pp.349-354
• /
• 2009

In this paper we have constructed three dimensional images and examined structural failure on thin film transistor (TFT) liquid crystal display (LCD) by using dual-beam focused ion beam (FIB) and IMOD software. Specimen was sectioned with dual-beam focused ion beam. Series of two dimensional images were obtained by scanning electron microscopy. Three dimensional reconstruction was constructed from them by using IMOD software. The short defect between Gate layer and Data layer was found from the result of three dimensional reconstruction. That phenomena made the function of the gate lost and data signal supplied to the electrode though the Drain continuously. That signal made continuous line defect. The result of the three dimensional reconstruction, serial section, SEM imaging by using the FIB will be the foundation of the next advanced study.

• Journal of Korean Vacuum Science & Technology
• /
• v.3 no.1
• /
• pp.1-9
• /
• 1999

This paper presents a newly enhanced damage model in Monte Carlo (MC) simulation for the accurate prediction of 3-Dimensional (3D) as-implanted impurity and point defect profiles induced by ion implantation in (100) crystal silicon. An empirical electronic energy loss model for B, BF2, As, P and Si self implant over the wide energy range has been proposed for the ULSI device technology and development. Our model shows very good agreement with the SIMS data over the wide energy range. In the damage accumulation, we considered the self-annealing effects by introducing our proposed non-linear recomvination probability function of each point defect for the computational efficiency. For the damage profiles, we compared the published RBS/channeling data with our results of phosphorus implants. Our damage model shows very reasonable agreement with the experiments for phosphorus implants.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.10a
• /
• pp.124-127
• /
• 2007

In this study, we focused on investigation of governing parameters affected on the fatigue properties in the hyper-eutectoid steel wires used for TBR tires. Steel wires are fabricated under different drawing strain from 3.36 to 3.80. Their diameters are 0.21 mm and 0.185mm, respectively. The fatigue properties was measured by hunter rotating beam tester, specially designed thin-sized steel wires. The results showed that the fatigue properites of steel wire, marked as A-1, were greater than the others, due to the low value of residual stress. In order to elucidate the variations of fatigue properties, the microstructure, surface defect and residual stress were observed and measured by useful analysis technique, such as TEM, 3D profiler and FIB.