• 한국환경과학회지
• /
• 제24권1호
• /
• pp.1-7
• /
• 2015

The solid-phase extractant PS-D2EHPA/TBP was prepared by immobilizing two extractants D2EHPA and TBP in polysulfone (PS). The prepared PS-D2EHPA/TBP was characterized by using fourier transform infrared spectrometer (FTIR) and scanning electron microscopy (SEM). The removal of Cu(II) from aqueous solution was investigated in batch system. The experiment data were obeyed the pseudo-second-order kinetic model. Equilibrium data were well fitted by Langmuir model and the removal capacity of Cu(II) by solid extractant PS-D2EHPA/TBP obtained from Langmuir model was 3.11 mg/g at 288 K. The removal capacity of Cu(II) was increased according to increasing pH from 2 to 6, but the removal capacity was decreased below pH 3 remarkably.

• 한국콘텐츠학회논문지
• /
• 제8권12호
• /
• pp.10-19
• /
• 2008

본 논문에서는 문화재의 실측된 3D 스캔(scan) 데이터로부터 내부문양 및 실루엣(silhouette)을 효과적으로 추출할 수 있는 자동화된 실루엣 추출 방법을 제안한다. 제안한 방법에서는 먼저 3D 벡터 데이터의 에지리스트(edge list)를 생성하고, 시점에 따라 윤곽 에지(contour edge)와 주름 에지(crease edge)를 결정한다. 다음으로 주름 에지에서 인접면들의 벡터 변화량을 검사하여 표면 실루엣을 추출한 후, 최종적으로 문화재의 도면(blueprint) 생성을 위한 윤곽 실루엣과 표면 실루엣을 추출한다. 제안한 실루엣 추출 방법의 성능 평가를 위하여 전통 기와, 자동차 및 석탑 데이터를 이용한 실루엣 추출 실험을 진행하였다. 제안한 방법은 기존의 임계값을 이용한 실루엣 추출 방법에서 불필요한 에지까지도 실루엣을 형성하는 것을 보완하여, 잡음과 같은 의미 없는 에지들을 효과적으로 제거함으로써 더욱 선명하고 깨끗한 실루엣 및 내부 문양을 추출하였다.

• 지구물리
• /
• 제9권1호
• /
• pp.7-19
• /
• 2006

Laser scanning is a new technology for obtaining Digital Surface Models(DSM) of the earth surface.It is a fast method for sampling the earth surface with high density and high point accuracy. This paper is for buildings extraction from LiDAR points data. The core part of building construction is based on a parameters filter for distinguishing between terrain and non-terrain laser points. The 3D geometrical properties of the building facades are obtained based on plane fitting using least-squares adjustment. The reconstruction part of the procedure is based on the adjacency among the roof facades. Primitive extraction and facade intersections are used for building reconstruction. For overcome the difficulty just reconstruct of laser points data used with digital camera images. Also, 3D buildings of city area reconstructed using digital map. Finally, In this paper show 3D building Modeling using digital map and LiDAR data.

• 한국CDE학회논문집
• /
• 제19권4호
• /
• pp.434-442
• /
• 2014

Most manufacturing enterprises create CAD data as a result of the product/part design process; however, the CAD data is being utilized only for production activities. Besides the processes directly related to manufacturing such as design and production, the CAD data is an important resource that can be used in variety of services (e.g., catalog production and production manuals) for manufacturing enterprises. This study proposes a software platform that can support a wide range of services for manufacturing companies in an efficient and productive way. The software platform was designed based on the functions identified by requirement analysis. The platform consists of four layers: data model layer to manage relevant data; library layer and common function layer to configure services; and application layer to install and run the software. Finally, this study evaluates the validity of the proposed platform architecture by applying it to the digital catalog system.

• 한국CDE학회논문집
• /
• 제7권2호
• /
• pp.81-88
• /
• 2002

Transmission of 3D shape model through Internet has become one of the hottest issues in these days. Presented in this paper is a new approach for the rapid transmission of the geometry data of the shape model. By analyzing the important three factors, the shape fidelity, the file size, and the decompression time, for the compression, we point out the potential problems of previous approaches of using the deltas between consecutive vertices and propose an alternative of directly using the position values of vertices of the model. It turns out that the proposed approach has smaller file size, has lesser distortion in the model, and the decompression is faster.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2009년도 춘계 종합학술대회 논문집
• /
• pp.816-821
• /
• 2009

본 논문에서는 건조물 문화재의 대용량 3D 데이터를 시점거리 기준으로 사용자에게 적합한 정보를 제공하기 위하여, 계층적 구조를 기반으로 한 단계별 상세정보 브라우징 기법을 제안하고자 한다. 대용량 건조물 문화재의 단계별 상세정보는 크게 계층적 구조를 생성하는 전처리 과정과 사용자의 시점 거리를 고려하여, 적합한 계층정보를 결정하는 상세정보 브라우징 과정을 통하여 제공한다. 전처리 과정에서는 3D 데이터를 최적화된 공간구조로 분류하여 관리하고, 공간 내 표면들 간의 관계도를 검사하여 메시(mesh) 구조에 홀이나 왜곡이 발생하지 않도록 표면을 재구성한 후 단계별 상세정보 데이터를 생성한다. 상세정보 브라우징 과정에서는 모델과 사용자 간의 시점 거리를 검사하고, 이에 적합한 단계의 데이터를 브라우징 함으로써, 관찰 시점 위치에 따라 사용자에게 적합한 계층 모델 데이터를 제공할 수 있었다.

• 한국철도학회논문집
• /
• 제10권4호
• /
• pp.373-380
• /
• 2007

Recently, various 4D CAD systems for visualizing construction schedule data are being developed. Specially, in case of railway project, the numerical information of progress data should be changed with visualized data by long construction section because the railway project consists of long length in construction site. This study suggests a case study of development of 4D CAD system for visualizing schedule information and the major functions of developed system are verified by railway project. The detailed application procedure of 4D CAD system including input data for a railway project is described in the study. The practical application of 4D CAD system can be improved in railway project by these demonstration researches.

• 한국의류산업학회지
• /
• 제15권2호
• /
• pp.247-255
• /
• 2013

This study develops size sections and specifications for females 7-18 years old. The specifications will contribute to the development of precise virtual models that represent basic data for the size alteration of 3D virtual models. A total of 33 items from the $5^{th}$ Size Korea data set were adopted and analyzed. Two representative factors (Obesity and Height Factors) were identified through a factor analysis of the 33 items. Waist circumference and stature were selected as representative variables for Obesity and Height Factors, respectively, and conducted cross tabulations between waist circumference and height for the age groups of 7-12 and 13-18 year-olds. Size sections were developed for the development of 3D models based on the results. A regression analysis then developed size specifications for each section with independent variables of waist circumference and height as well as dependent variables of reference body size. Subsequently, Obesity Factors were better explained by waist circumference and Height Factors were better explained by stature. Finally, size specifications for each section were developed.

• 한국의류학회지
• /
• 제30권8호
• /
• pp.1242-1252
• /
• 2006

Many applications in computer graphics require complex, highly detailed models. However, to control processing time, it is often desirable to use approximations in place of excessively detailed models. Therefore, we have developed the notion of an optimal matrix to simplify the model surface which can then rapidly obtain high quality 2D patterns by flattening the 3D surface. Firstly, the woman's 3D body was modeled based on Size Korea data. Secondly, the 3D model was divided by shell and block for the pattern draft. Thirdly, each block was flattened by the grid and bridge method. Finally, we select the optimal matrix and demonstrate it's efficiency and quality. The proposed approach accommodates surfaces with darts, which are commonly utilized in the clothing industry to reduce the deformation of surface forming and flattening. The resulting optimal matrix could be an initiation of standardization for pattern flattening. This can facilitate much better approximations, in both efficiency and exactness.

• Nuclear Engineering and Technology
• /
• 제56권5호
• /
• pp.1902-1912
• /
• 2024

This paper presents results from system-level modeling of a water-based reactor cavity cooling system using RELAP5-3D. The computational model is benchmarked with experimental data from a half-scale RCCS test facility at Argonne National Laboratory. The model prediction is first compared with a two-phase oscillatory baseline experimental case where mixed accuracy is obtained. The model shows reasonable prediction of mass flow rate, pressure, and temperature but significant overprediction of void fraction. The model prediction is then compared with a fault case where the inlet of the risers is gradually reduced using a throttling valve. As the valve is closed, the model is able to predict some major flow phenomena observed in the experiment such as the dampening of oscillations, the reintroduction of oscillations, as well as boiling, flashing, and geysering in the risers. However, the timeline of these events are not well captured by the model. The model is also used to investigate the evolution of flow regime in the chimney. This work highlights that the semi-empirical constitutive relations used in RELAP-3D could have a strong influence on the accuracy of the model in two-phase oscillatory flows.