• Journal of Fashion Business
• /
• v.17 no.6
• /
• pp.141-157
• /
• 2013

In this study, we analyzed the figure type and lower-body size of Shanghai and Hong Kong adult women in their early twenties using the data obtained from 3D whole body scanners. We also provided concrete information related to women's lower bodies, in terms of crotch width, crotch length, inseam, outseam, slope of waist, etc., among women in Shanghai and Hong Kong. The result may be useful to the Chinese apparel industry when designing trouser pants for adult women. According to the results of the factor analysis for categorizing the body shape of the lower half, 5 factors were obtained: obesity of the lower half factor, height of the lower half factor, length from waist to the crotch factor, factor related to legs, and shape of the abdomen factor. After performing a cluster analysis according to the factor analysis, three clusters were set: Cluster 1 was represented as the lower half growth type, which has a high value in height of the lower half factor and grows in the abdomen part. Cluster 2 was represented as thin legs type, which has a low value in most part compared to the length of leg bones and factors about legs that have high value. Cluster 3 was represented as the obesity type having a high value in the obesity of the lower half factor. Overall, thin legs type achieved a high rate in Shanghai adult women and obesity type received a high rate in adult women living in Hong Kong.

• Journal of Fashion Business
• /
• v.19 no.3
• /
• pp.130-143
• /
• 2015

By studying 3-D virtual human modeling, motion-capturing and clothing simulation for easier and safer work clothes development, this research aimed (1) to categorize heavy manufacturing work motions; (2) to generate a 3-D virtual male model and establish painting work motions within a 3-D virtual clothing simulation system through computerized body scanning and motion-capturing; and finally (3) to suggest simulated clothing images of painting work clothes developed based on virtual male avatar body measurements by implementing the work motions defined in the 3-D virtual clothing simulation system. For this, a male subject's body was 3-D scanned and also directly measured. The procedures to edit a 3-D virtual model required the total body shape to be 3-D scanned into a digital format, which was revised using 3-D Studio MAX and Maya rendering tools. In addition, heavy industry workers' work motions were observed and recorded by video camera at manufacturing sites and analyzed to categorize the painting work motions. This analysis resulted in 4 categories of motions: standing, bending, kneeling and walking. Besides, each work motion category was divided into more detailed motions according to sub-work posture factors: arm angle, arm direction, elbow bending angle, waist bending angle, waist bending direction and knee bending angle. Finally, the implementation of the painting work motions within the 3-D clothing simulation system presented the virtual painting work clothes images simulated in a dynamic mode.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.13 no.4
• /
• pp.79-91
• /
• 2011

This study divided school age by considering a change in the stage of body growth by age in elementary schoolgirls with the use of body scan data, and considered by comparing body size characteristics by school age. Elementary schoolgirls' body shape cannot be divided clearly. However, ages 7-10 were bound into the same group for the majority of girth, width, and thickness items. 7-8 years old, 9-10 years old, and 11-12 years old were bound into the same group in most items except ages 9 and 10 for the height item. Thus, significant difference was indicated between groups. Accordingly, this study divided the school age into three periods such as early stage(ages 7-8), middle stage(ages 9-10), and late stage(ages 11-12) in consideration of the stages for elementary schoolgirls' body-shape growth. As a result of analyzing body size according to division of school age, the higher school age leads to continuous growth. The notable growth was indicated especially in the middle stage and late stage. Examining centering on typical items related to the clothing construction, there was notable increase in waist thickness and hip thickness between early and middle stages and in height, weight, breast girth, waist circumference, back length, breast width, and waist width between middle and late stages. On the other hand, hip circumference, hip width, breast thickness, and length between shoulder edges were indicated to grow relatively and evenly among early, middle, and late stages. The lateral form was shown a clear difference in the forms of early, middle, and late stages in height and length of the whole body shape and in side thickness. The early and middle stages belong to body shape that abdomen is projected to be curved. The late stage showed right body shape which is straight and stable form in posture.

• Journal of Fashion Business
• /
• v.22 no.2
• /
• pp.27-39
• /
• 2018

This study analyzed the body shape of women over 70 years and classified their body shapes in order to provide basic data for the development of pants patterns that can complement the weakness of the body shape of elderly women. It were analyzed using SPSS Ver. 20.0. Five factors were extracted from the lower body: obesity and thigh thickness, lower body length, under knee thickness, ankle height, and hip sag. In type 1, the lower body was obese and the legs were thick, but the hips were not sagging. It was named 'high-hip obesity figure'. Type 2's abdomen, hip, and waist were obese, but the legs were thin and the hip were not sagging. Thus, 'bird-leg middle obesity figure' was the name. Type 3 had a long and slender lower body, but legs were thick and the hips were saggy, it was named 'strong-leg low-hip slender figure'. The elderly women showed less difference in waist, abdomen, and hip circumference. The abdominal circumference was 2-3cm more than the waist and hip circumference; hence there is a need to differentiate the shape and number of darts in the production of bottom-wear patterns for older women. In addition, the leg circumference is gradually reduced by aging compared to the size of the lower body. Therefore, it would be necessary to search for a method that can effectively design the difference between the hip circumference and the leg circumference in relation to the body shape and the aesthetics of older women.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.3 s.162
• /
• pp.463-474
• /
• 2007

With rapid expansion in e-retailing of apparel business, personalized fitting model service shows the possibility as the differentiated marketing strategy in cyber shopping. According as necessity of personalized fitting model construction rises, it is tried personalized fitting model creation in several fields such as computer engineering, mechanical engineering, information engineering. But, because existent study was concentrated only on human body modeling, it does not reflect average morphological characteristics of human body properly. In this study, we wish to examine if morphing is fit for expressing characteristic of average human body shape and suggest desirable morphing. We used 3-D scan data of 254 Korean middle aged men collected by Size Korea 2004. The result of this study are as follows: Lower body types were categorized by height hip girth and lower drop(hip girth-navel girth) which were main factors of lower body shape. Then each factor was divided into 3 groups respectively, 30% in the middle, over 30%, under 30%. In 27 groups, the group which belonged to 30% in the middle of height, 30% in the middle of hip girth, 30% in the middle of lower drop was selected as a representative group. We tested geometrical figure by differ volume, tilt, position of point. And we created a representative type of men's lower bodies by morphing the representative group and analyzed it's horizontal, vertical sections. A representative type which was created by morphing reflected a real body and changed realistically at the part of hip, crotch, calf muscle and so on. A cross sections of a representative type were similar to average cross sections of the representative group in size and shape. So it was proved that morphing was successful.

• Fashion & Textile Research Journal
• /
• v.20 no.4
• /
• pp.429-438
• /
• 2018

This study analyzed the fit-zone of the neck for females in their 60s. We considered the standard body types of females in their 60s and the four body types from the sixth Size Korea. The results of the study were as follows. We could not determine a pattern formula for the neck based on the changes in the body type of females in their 60s. However, the position of the lateral neck point generally showed a significant difference from that of females in their 20s. In the case of the shoulder angle, the point of the shoulder was angled slightly towards the back in all body types. It was also found that the curve of the neck circumference for both the collar and the bodice should have been smoother than what was shown on the 3D shape. The larger the height difference between the point of the back of the neck and the lateral neck point in the 3D shape, the smoother the design should be at the curve of the circumference at the front of the neck. A larger curvature in the front radius of the 3D shape increased the difference in the shape of the curve between the collar and the basic pattern of the bodice. Hence, a more careful design is required for these parts of the pattern. In addition, the more the front neck is bent, the smoother the circumference curve should be in the pattern design at the front of the neck and the collar.

• Fashion & Textile Research Journal
• /
• v.11 no.2
• /
• pp.308-314
• /
• 2009

In creating an avatar, consumers can find out for themselves their own sizes to be entered. Also, putting in a face creation main-page menu option enables clients to make up their faces and match them to their bodies. Through this process when purchasing clothes through the internet consumers can enter their own body sizes and create avatars that are identical to their body shape. The uniqueness of developed prototype is that it creates an avatar similar to one's body shape according to body size inputs and demonstrates visually to customers the on-line comfort test which was only available off-line traditionally. The avatar follows the movement of mouse from left to right which enables 3 dimensional visualization. Through maximizing the visual effect this research focuses on enabling consumers to feel subjective parts as if they are off-line. This study seeks to provide a type of prototype of an online shopping mall that meets the demand of the consumers using the 3D avatar.

• Journal of the Korea Society of Computer and Information
• /
• v.23 no.7
• /
• pp.63-72
• /
• 2018

The purpose of this study was to compare and analyze the pants pattern of the lower body of 70-85 aged women. I tried to present excellent pants pattern that is convenient and suitable for the activities of elderly women. Through this, I tried to provide basic data necessary for making elderly women 's pants. As a result of evaluating the appearance of the pants pattern according to the body type, the fit of the type 2 was evaluated as the highest in the item except the position of the front waist line. For the objective evaluation of the 3D simulation, the air gap of the pants by the body part analysis showed that there was not much difference in the air gap around the waist circumference, hip circumference, thigh circumference, and knee circumference by applying the same drawing method and body size. However, in type 2, the air gap of thigh and knee circumference parts was larger than that of type 1 and type 3. Because type 2's legs were thin but it used same size of hemline. It was thought that it is necessary to adjust the space of front and back crotch length to 1 inch (2.54 cm) instead of 1.9 cm (3/4 inch) so that the waistline position of all three types can be set up a little to cover the abdomen. This study was conducted to investigate changes in body shape of elderly women and to develop appropriate pants patterns.

• The Research Journal of the Costume Culture
• /
• v.31 no.2
• /
• pp.193-212
• /
• 2023

The purpose of this study is to classify the body types of obese men in their 50-60s and compare them with those of obese middle-aged men in their 30-40s. The 3D anthropometric data of obese men aged 50 to 60 years from the 6th Size Korea. The data are analyzed using SPSS 25.0 for Windows, and descriptive statistics, χ² test, correlation analysis, and cluster analysis are used to classify obese body types. As a result of the study, five factors are extracted to determine body types, which are classified into three obese body types through cluster analysis. 1) a large physique and consequently large circumference and height; 2) A short upper body length, short height, and thick belly; 3) the lowest rate of obesity and relatively flat abdominal curve. For the 30-40s group, Type1 showed the highest rate at 55.6%, whereas for the 50s group, Type3 showed the highest rate at 49.3%, and for 60s group, Type2 showed the highest rate at 41.2%. The classification accuracy of the discriminant function for each type is 94.7%, indicating relatively high accuracy. Furthemore, the recently changed obese body type are analyzed by comparing it with the 3D anthropometric data of 8th Size Korea, which will contribute to the utilization of basic data for manufacturing apparel for obese men.

• Fashion & Textile Research Journal
• /
• v.2 no.3
• /
• pp.239-245
• /
• 2000

The purpose of this study was for analysis of ease about basic bodice pattern, as the first step of the research process for the drawing method of basic bodice for women in their twenties. The five selected basic bodice were made and they were worn by FRP body The garment space of each bodice was measured by analysis of the garment space of each section in figure of polymerization of cross section by a 3-D measuring instrument. The research suggests that this compared analysis is an objective reference. This analysis not only of the area of cross section of garment space and ease but also of the girth of the body shape and wearing shape, using the PAD system and 3-D measuring instrument, can be helpful in making garment patterns.