• 방송공학회논문지
• /
• 제23권2호
• /
• pp.302-315
• /
• 2018

지각 양자기 광전 변환 함수의 생략 Taylor 급수를 이용한 선형 근사는 휘도 조절 기법의 하드웨어 구현에 적합한 폐쇄형 솔루션을 제공할 수 있지만, 600~3,900 cd/m2 구간의 선형 영역 광 신호에 대해 상대적으로 큰 근사 오차를 유발한다. 이러한 비-선형 광전 변환 함수의 근사 오차 개선을 위해, 본 논문에서는 새로운 선형 모델을 제안한다. 제안된 선형 근사 모델은 그 근사 범위를 고려한 직선의 위치 교정 및 기울기 산출을 수행한다. 제안 모델의 성능 검증을 위해, 다양한 고-휘도 실험 시퀀스를 대상으로 모의실험을 수행하였고, 이를 통해 채도가 높은 색상을 포함하는 시퀀스에 대해서는, Taylor 급수를 기반으로 한 기존의 선형 모델에 비해, 휘도 신호의 t-PSNR을 4.65dB 만큼 개선할 수 있는 높은 성능 향상을 확인하였다.

• Bulletin of the Korean Chemical Society
• /
• 제23권2호
• /
• pp.229-240
• /
• 2002

Quantum mechanical calculation is performed for the $O(^1D)$ + HCl ${\rightarrow}$OH + Cl reaction using Reactive Infinite Order Sudden Approximation. Shifting approximation is also employed for the l ${\neq}$ 0 partial wave contributions. Various dynamical quantities are calculated and compared with available experimental results and quasiclassical trajectory results. Vibrational distributions agree well with experimental results i.e. product states mostly populated at $v_f$ = 3, 4. Our results also show small peak at $v_f$ = 0, which indicates bimodal vibrational distribution. The results show two significant broad peaks in ${\gamma}_i$ dependence of the cross section, one is at ${\gamma}_i$ = $15^{\circ}-35^{\circ}$ and the another is at ${\gamma}_i$= $55^{\circ}-75^{\circ}$ which can be explained as steric effects. At smaller gi, the distribution is peaked only at higher state ($v_f$ = 3, 4) while at the larger gi, both lower state ($v_f$ = 0) and higher state ($v_f$ = 3, 4) are significantly populated. Such two competing contributions (smaller and larger ${\gamma}_i$) result in the bimodal distribution. From these points we suggest two mechanisms underlying in current reaction system: one is that reaction occurs in a direct way, while the another is that reaction occurs in a indirect way.

• 한국음향학회지
• /
• 제36권1호
• /
• pp.1-11
• /
• 2017

본 연구에서는 두 변수 유리함수 근사법에 기반한 3차원 음향 포물선 방정식의 제곱근 연산자의 새로운 근사식을 제안한다. 이 근사식은 기존의 제곱근 연산자에 대한 근사 연구와 비교해서 두 가지의 장점을 가진다. 첫 번째는 광대역 각도 능력이다. 제안된 식은 방위각 $45^{\circ}$에서 3차원 음향 포물선 방정식의 거리 축으로부터 $62^{\circ}$까지 넓은 각도에 대해 정확도를 가지는데, 이 값은 기존에 연구된 3차원 음향 포물선 방정식 알고리즘의 각도 한계의 약 세 배이다. 두 번째로는 본 근사식의 분모는 수심과 횡 거리에 대한 연산자의 곱으로 표현된다는 점이다. 이러한 분할 형태는 3차원 포물선 방정식을 손쉽게 삼중대각행렬 방정식으로 변환할 수 있다는 점에서 수치해석에서 선호된다. 제안된 식의 성능을 검증하기 위해 위상 오차분석을 통해 타 근사법과의 비교 연구가 수행되었고, 제안된 방법은 가장 우수한 성능을 보였다.

• Journal of Mechanical Science and Technology
• /
• 제16권7호
• /
• pp.896-901
• /
• 2002

This paper presents a nonlinear modeling method for dynamic analysis of flexible structures undergoing overall motions that employs the mode approximation method. This method, different from the naive nonlinear method that approximates only Cartesian deformation variables, approximates not only deformation variables but also strain variables. Geometric constraint relations between the strain variables and the deformation variables are introduced and incorporated into the formulation. Two numerical examples are solved and the reliability and the accuracy of the proposed formulation are examined through the numerical study.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 춘계학술대회 논문집
• /
• pp.19-22
• /
• 2004

A scheme of shape optimization by new approximation approach is applied to design of a flow guide in three-dimensional extrusion processes. The optimization scheme is presented to reduce computation time fur the optimization process and applied to an H-section extrusion problem for verifying the efficiency and the usefulness. The object of optimization is to minimize the deviation of exit velocity and control points of a Bezier curve describing the shape of the flow guide are regarded as design variables. The effectiveness of the proposed scheme is then demonstrated through the applied example.

• The Journal of the Acoustical Society of Korea
• /
• 제25권1E호
• /
• pp.1-7
• /
• 2006

This study examines the reflection characteristic of a thin transition layer of the ocean bottom showing variability with respect to depth. In order to model the surficial sediment simply, we reduce the Biot model to the depth dependent wave equation for the pseudo fluid using the fluid approximation (weak frame approximation). From the reduced equation, the difference between the inherent frequency dependency of the reflection and the frequency dependency resulting from a thin transition layer is investigated. Using Tang's depth porosity profile model of the surficial sediment [D. Tang et al., IEEE J. Oceanic Eng., vol.27(3), 546-560(2002)], we numerically simulated the reflection loss and investigated the contribution from both frequency dependencies. In addition, the effects of different sediment type and varying depth structure of the sediment are discussed.

• 천문학회지
• /
• 제49권1호
• /
• pp.1-8
• /
• 2016

The aim of this study is to describe the physical processes taking place in the solar photosphere. Based on 3D hydrodynamic simulations including a detailed radiation transfer scheme, we investigate thermodynamic structures and radiation fields in solar surface convection. As a starting model, the initial stratification in the outer envelope calculated using the solar calibrations in the context of the standard stellar theory. When the numerical fluid becomes thermally relaxed, the thermodynamic structure of the steady-state turbulent flow was explicitly collected. Particularly, a non-grey radiative transfer incorporating the opacity distribution function was considered in our calculations. In addition, we evaluate the classical approximations that are usually adopted in the onedimensional stellar structure models. We numerically reconfirm that radiation fields are well represented by the asymptotic characteristics of the Eddington approximation (the diffusion limit and the streaming limit). However, this classical approximation underestimates radiation energy in the shallow layers near the surface, which implies that a reliable treatment of the non-grey line opacities is crucial for the accurate description of the photospheric convection phenomenon.

• 한국정밀공학회지
• /
• 제16권5호통권98호
• /
• pp.160-168
• /
• 1999

This paper describes one method of reverse engineering that machines a free form shape without descriptive model. A portable five-axes 3D CMM was used to digitize point data from physical model. After approximation by rational B-spline curve from digitized point data of a geometric shape, a surface was constructed by the skinning method of the cross-sectional design technique. Since a surface patch was segmented by fifteen part, surface merging was also implemented to assure the surface boundary continuity. Finally, composite surface was transferred to commercial CAD/CAM system through IFES translation in order to machine the modeled geometric shape.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1990년도 하계학술대회 논문집
• /
• pp.542-545
• /
• 1990

Texture provides an important source of information about the local orientation of visible surfaces. In this study the 3D shape of a textured surface is recovered from its perspective projection image on the assumption that the texture is homogeneously distributed. To recover 3D structure, the distorting effects of the perspective projection must be distinguished from properties of the texture. In this study, paraperspective projection, approximation of perspective projection, has employed.

• 소성∙가공
• /
• 제10권1호
• /
• pp.23-29
• /
• 2001

In this study, the optimized initial hole shape for T-branch forming was proposed to obtain effective welding region. Design variables were determined by approximation analysis using volume constant condition. We performed 3D elastic-plastic FEM(Finite Element Method) analysis to simulate T-branch forming process. The variation of height and thickness of T-branch with various hole shapes was investigated. The optimized initial hole shape equation was obtained by using results for the numerical analysis.