• Korean Chemical Engineering Research
• /
• v.59 no.4
• /
• pp.639-643
• /
• 2021

In this study, fluorinated ethylene propylene (FEP) nanoparticle as an adhesive for fabricating a three-dimensional multilayered microfluidic device was studied. The formation of evenly distributed FEP nanoparticles layer with 3 ㎛ in thickness on substrates was achieved by simple spin coating of FEP dispersion solution at 1500 rpm for 30 s. It is confirmed that FEP nanoparticles transformed into a hydrophobic thin film after thermal treatment at 300 ℃ for 1 hour, and fabricated polyimide film-based microfluidic device using FEP nanoparticle was endured pressure up to 2250 psi. Finally, a three-dimensional multilayered microfluidic device composed of 16 microreactors, which are difficult to fabricate with conventional photolithography, was successfully realized by simple one-step alignment of FEP coated nine polyimide films. The developed three-dimensional multilayered microfluidic device has the potential to be a powerful tool such as high-throughput screening, mass production, parallelization, and large-scale microfluidic integration for various applications in chemistry and biology.

• Journal of Advanced Navigation Technology
• /
• v.26 no.3
• /
• pp.160-165
• /
• 2022

In this paper, we have proposed a magnetic resonant 6.78MHz WPT(wireless power transfer) technique which can be applied to a fixed transmitter and a receiver of varying relative distance and coil alignment, Power transmission characteristics are studied with the relative distance and misalignment ration of coil area between the transmitting and receiving coils. The coils are designed with the size of 60×80mm² by direct feeding method, and the characteristics are derived with the maximum relative distance of 50mm and horizontal area misalignment state of 0-40mm misalignment of coil center axis in the XY plane. The power transmission characteristics are compared between the 3D EM simulation and the measured data, and the power transmission shows larger than -3dB performance with the vertical distance of up to 30mm and 50% area misalignmment ratio. This work showsthe transmission characteristics according to relative distance and misalignment state between the cols and that direct feeding has advantage for the short relative distance and small misalignment ratio.

• 한국체육학회지인문사회과학편
• /
• v.55 no.6
• /
• pp.749-757
• /
• 2016

The purpose of this study was to investigate the effect of stability on one leg standing posture in yoga practice. Thirteen women college student who have never done yoga participated in this study. In order to collect data before and after yoga practicing for two years, we were used 3D motion capture system and electromyography. The results were as follows. First, ranges of motions for Y axis of left knee joint and X axis of right ankle joint were significantly different in dancer posture(p<.05), and then X axis of right ankle and Y axis of left ankle joint were significantly different in tree posture of pre and post training. Second, the planar alignment angle of trunk-pelvis was not significant difference in dancer and tree posture. Third, CoM-distances of Y, Z directions were significant difference in the tree posture(p<.05). Fourth, Muscle activities of both rectus abdominis, erector spinae and left quadriceps were significant difference in tree posture(p<.05). These findings suggested that yoga training played important roles in stable postures as results of decreasing rotation ankle joint and movement of CoM and enforcing core muscles. This study provides evidence for effectiveness of the stability on standing posture and can get a great effect on posture correction by means of yoga training. Hereafter, study on alignment angle, which is a measurement of postural stabilization will be needed by future yoga training.

• The Korean Journal of Mycology
• /
• v.45 no.4
• /
• pp.259-269
• /
• 2017

In order to investigate the diversity of yeasts from major rivers (the Daejeoncheon, Gapcheon and Yudeungcheon) located in Daejeon city, we isolated wild yeasts by plating diluents of samples collected during the summer and winter of 2016 onto yeast extract-peptone-dextrose (YPD) medium, then identified them using Basic Local Alignment Search Tool (BLAST) analysis to compare the nucleotide sequences of the PCR amplicons for the D1/D2 domain of 26S rDNA. In total, we isolated 191 yeast strains belonging to 104 species from 148 soil or water samples from the rivers and their junctions. Candida spp. (45 strains) including Candida tropicalis (22 strains) were the most abundantly isolated strains from the Daejeoncheon. Candida spp. (16 strains) including Candida vartiovaarae (8 strains) and Candida spp. (18 strains) such as Candida sake (4 strains) were also the dominant isolates from the Gapcheon and Yudeungcheon, respectively. In conclusion, Candida spp. and Cryptococcus spp. were the most dominant strains, corresponding to 42% and 7% of the 191 yeast strains isolated in this study, respectively.

• Journal of Microbiology and Biotechnology
• /
• v.26 no.11
• /
• pp.1908-1917
• /
• 2016

Wild strain L-6 was subjected to combined mutagenesis, including UV irradiation, atmospheric and room temperature plasma, and ion beam implantation, to increase the yield of 1,3-dihydroxyacetone (DHA). With application of a high-throughput screening method, mutant Gluconobacter oxydans I-2-239 with a DHA productivity of 103.5 g/l in flask-shake fermentation was finally obtained with the starting glycerol concentration of 120 g/l, which was 115.7% higher than the wild strain. The cultivation time also decreased from 54 h to 36 h. Compared with the wild strain, a dramatic increase in enzyme activity was observed for the mutant strain, although the increase in biomass was limited. DNA and amino acid sequence alignment revealed 11 nucleotide substitutions and 10 amino acid substitutions between the sldAB of strains L-6 and I-2-239. Simulation of the 3-D structure and prediction of active site residues and PQQ binding site residues suggested that these mutations were mainly related to PQQ binding, which was speculated to be favorable for the catalyzing capacity of glycerol dehydrogenase. RT-qPCR assay indicated that the transcription levels of sldA and sldB in the mutant strain were respectively 4.8-fold and 5.4-fold higher than that in the wild strain, suggesting another possible reason for the increased DHA productivity of the mutant strain.

• Restorative Dentistry and Endodontics
• /
• v.23 no.1
• /
• pp.487-501
• /
• 1998

In the case of CAD/CAM ceramic inlay restorations, if isthmus width is widened too much, it may cause fracture of remaining tooth structure or loss of bonding at the luting interface because of excessive displacement of buccal or lingual cusps under occlusal loads. So to clarify the criterior of widening isthmus width, this study was designed to test the tensile bond strength and bond failure mode between dentin and ceramic cemented with luting composite resin cements. Cylindrical ceramic blocks(Vita Cerec Mark II, d=4mm) were bonded to buccal dentin of 40 freshly extracted third molars with 4 luting composite resin cements(group1 : Scotchbond Resin Cement/Scotchbond Multi-Purpose, group2 : Duolink Resin Cement/ All-Bond 2, group3: Bistite Resin Cement/Ceramics Primer, and group4:Superbond C&B). Tensile bond test was done under universal testing machine using bonding and measuring alignment blocks(${\phi}ilo$ & Urn, 1992). After immersion of fractured samples into 1 % methylene blue for 24 hours, failure mode was analysed under stereomicroscope and SEM. Results: The tensile bond strength of goup 1, 2 & 4 was $13.97{\pm}2.90$ MPa, $16.49{\pm}3.90$ MPa and $16.l7{\pm}4.32$ MPa, respectively. There was no statistical differences(p>0.05). But, group 3 showed significantly lower bond stregnth($5.98{\pm}1.l7$ MPa, p<0.05). In almost all samples, adhesive fractures between dentin and resin cements were observed. But, in group 1, 2 & 4, as bond strength increased, cohesive fracture within resin cement was observed simultaneously. And, in group 3, as bond strength decreased, cohesive fracture between hybrid layer and composite resin cement was also observed. Cohesive fracture within dentin and porcelain adhesive fracture were not observed. In conclusion, although adhesive cements were used in CAD/CAM -fabricated ceramic inlay restorations, the conservative priciples of cavity preparation must be obligated.

• Korean Journal of Microbiology
• /
• v.32 no.4
• /
• pp.264-270
• /
• 1994

A gene coding for a novel putative $\sigma$ factor of RNA polymerase has been identified from Streptomyces coelicolor A3(2) using Escherichia coli rpoS gene fragment as a probe. The 486 bp rpoS gene fragment was amplified from E. coli genomic DNA by PCR with two synthetic oligonucleotides, the sequences of which were deduced from the amino acid sequences in the regions 2.3 and 4.2 conserved among various bacterial factors. When E. coli genomic DNA fragments were hybridized with cloned rpoS probe, only one band corresponding to rpoS gene (3.2 kb PvuII fragment or 2.3 kb KpnI fragment) was detected. In S. coelicolor, however, two bands were detected both in PvuII digested DNA and SalI digested DNA. 3.5 kb PvuII fragment which binds the rpoS gene probe was cloned (pMS1) from the sublibrary, and the nucleotide sequences of 1.0 kb BamH'/HincII subclone (pBH2) was partially determined. The nucleotide sequences revealed extensive similarity to other $\sigma$ factor genes of S. coelicolor (hrdA, hrdB, hrdC, hrdD), S. aureofaciens (hrdA, hrdB, hrdC, hrdD), Synechococcus species, Pseudomonas aeruginosa, Stigmatella aurantiaca, and Anabaena species. The nucleotide sequences in regions 1.2 and 4 were compared with the corresponding regions of 5 known ${\sigma}$ factor genes of S. coelicolor by multiple alignment. It turned out that the cloned gene is most closely related to hrdA showing 88% amino acid similarity in region 1.2 and 75% in region 4.

• Applied Biological Chemistry
• /
• v.51 no.3
• /
• pp.171-176
• /
• 2008

The comparative molecular similarity indices analysis (CoMSIA) models between 3${\beta}$-Hydroxy-12-oleanen-28-oic acid (1-30) analogues as substrate molecule and their inhibitory activities ($pI_{50}$) against protein tyrosine phosphatase (PTP)-1B were derived and discussed quantitatively. Listing in order, the CoMFA>CoMSIA${\geq}$HQSAR>2D-QSAR model, these QSAR models had the better statistical values. The optimized CoMSIA F1 model at grid 3.0${\AA}$ had the best predictability and fitness ($q^2$=0.754 and $r^2$=0.976) by field fit alignment. The order of contribution ratio (%) of CoMSIA fields concerning the inhibitory activities was a H-bond acceptor (48.9%), steric field (25.8%) and hydrophobic field (25.4%), respectively. Therefore, the inhibitory activities of substrate molecules against PTP-1B were dependent upon H-bond acceptor field (A) of $R_4$-group. From the analytical results of CoMSIA contour maps, oleanolic acid derivatives will have better inhibition activities if $R_1$ group has H-bond acceptor disfavor, $R_3$group has steric disfavor and $R_4$ group has steric, hydrophobic, H-bond favor.

• Journal of Technology Innovation
• /
• v.18 no.1
• /
• pp.21-51
• /
• 2010

This paper examines the knowledge transfer effect in Korean venture systems. Existing literature has provided rich evidence of the effect of knowledge transfer, but we do not have micro mechanisms inherent in the process of knowledge transfer. This paper argues that knowledge transfer effects vary depending on the knowledge types, sources, and legacy. This paper also tests role of the two important pillars in knowledge transfer of Korean venture startups; venture capital and government. This paper also examines the role of absorptive capacity in the knowledge transfer process. With 1,862 sample of Korean venture firms, this study employed three methods depending on 3 different types of dependent variables: hierarchical regression, logistic regression, and survival analysis. Main findings include that 1) knowledge characteristic itself and its alignment with industry influence the knowledge transfer effects, 2) government support has a negative effect on financial performance of venture firms, but does not have significant interaction effect on knowledge transfer, and 3) the absorptive capacity of each firm moderates the knowledge transfer effects. The theoretical and practical implications are discussed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.6
• /
• pp.661-667
• /
• 2011

Kinematic contact trigger probes are widely used for feature inspection and measurement on coordinate measurement machines (CMMs) and computer numerically controlled (CNC) machine tools. Recently, the probing accuracy has become one of the most important factors in the improvement of product quality, as the accuracy of such machining centers and measuring machines is increasing. Although high-accuracy probes using strain gauge can achieve this requirement, in this paper we study the universal economic kinematic contact probe to prove its probing mechanism and errors, and to try to make the best use of its performance. Stylus-ball-radius and center-alignment errors are proved, and the probing error mechanism on the 3D measuring coordinate is analyzed using numerical expressions. Macro algorithms are developed for the compensation of these errors, and actual tests and verifications are performed with a kinematic contact trigger probe and reference sphere on a CNC machine tool.