• Korean Journal of Construction Engineering and Management
• /
• v.23 no.2
• /
• pp.33-44
• /
• 2022

The simulation function by the 4D system is a representative BIM function in the construction stage. For the 4D simulation, schedule information for each activity must be created and then linked with the 3D model. Since the 3D model created in the design stage does not consider schedule information, there are practical difficulties in the process of creating schedule information for application to the construction stage and linking the 3D model. In this study, after extracting the schedule information of the construction stage using the HDBSCAN algorithm from the 3D model in the design stage, authors propose a methodology for automatically generating schedule information by identifying precedence and sequencing relationships by applying the topological alignment algorithm. Since the generated schedule information is created based on the 3D model, it can be used as information that is automatically linked by the common parameters between the schedule and the 3D model in the 4D system, and the practical utility of the 4D system can be increased. The proposed methodology was applied to the four bridge projects to confirm the schedule information generation, and applied to the 4D system to confirm the simplification of the link process between schedule and 3D model.

• The Journal of Advanced Prosthodontics
• /
• v.10 no.5
• /
• pp.367-373
• /
• 2018

PURPOSE. To evaluate the fit of a crown produced based on a 3D printed model and to investigate its clinical applicability. MATERIALS AND METHODS. A master die was fabricated with epoxy. Stone dies were fabricated from conventional impressions (Conventional stone die group: CS, n=10). Digital virtual dies were fabricated by making digital impressions (Digital Virtual die group: VD, n=10). 3D data obtained from the digital impression was used to fabricate 3D printed models (DLP die group: DD, n=10, PolyJet die group: PD, n=10). A total of 40 crowns were fabricated with a milling machine, based on CS, VD, DD and PD. The inner surface of all crowns was superimposed with the master die files by the "Best-fit alignment" method using the analysis software. One-way and 2-way ANOVA were performed to identify significant differences among the groups and areas and their interactive effects (${\alpha}=.05$). Tukey's HSD was used for post-hoc analysis. RESULTS. One-way ANOVA results revealed a significantly higher RMS value in the 3D printed models (DD and PD) than in the CS and DV. The RMS values of PD were the largest among the four groups. Statistically significant differences among groups (P<.001) and between areas (P<.001) were further revealed by 2-way ANOVA. CONCLUSION. Although the fit of crowns fabricated based on the 3D printed models (DD and PD) was inferior to that of crowns prepared with CS and DV, the values of all four groups were within the clinically acceptable range (<$120{\mu}m$).

• Fashion & Textile Research Journal
• /
• v.26 no.1
• /
• pp.78-87
• /
• 2024

This study aimed to propose an innovative teaching pedagogy using a half-scale body form in apparel design education and evaluate its effectiveness in augmenting students' understanding of ergonomic patterns. Constructed in alignment with Phoenix's (2018) study, which used 3D body scanning and digital editing software, the half-scale body form was created through a five-step process, encompassing body measurement, 3D body modeling, fabrication of a physical half-scale body form, pattern making, and evaluation. Implemented in an undergraduate patternmaking course offered at a 4-year university in the metropolitan Seoul, this instructional approach's effectiveness was gauged through students' course projects and exit interviews. The results underscored the positive impact of the proposed teaching pedagogy on students' grasp of ergonomic pattern development, fostering a keen understanding of diverse body shapes and sizes and the relationship between the human body and garments. Furthermore, it played a role in cultivating positive body image and self-endorsement among students. The research contributes meaningfully by presenting a fresh perspective in apparel design education, seamlessly integrating advanced anthropometric and technological tools into a conventional patternmaking classroom. It offers a novel learning experience for students majoring in apparel, creating a fun and interactive teaching environment.

• Journal of Broadcast Engineering
• /
• v.11 no.2 s.31
• /
• pp.164-173
• /
• 2006

The data structure of the concentric mosaic can be regarded as a video sequence with a slowly panning camera. We take a concentric mosaic with match or alignment of video sequences. Also the concentric mosaic required for huge memory. Thus, compressing is essential in order to use the concentric mosaic. Therefore we need the algorithm that compressed data structure was maintained and the scene was decoded. In this paper, we used 3D lifting transform to compress concentric mosaic. Lifting transform has a merit of wavelet transform and reduces computation quantities and memory. Because each frame has high correlation, the complexity which a scene is detected form 3D transformed bitstream is increased. Thus, in order to have higher performance and decrease the complexity of detecting of a scene we executed 3D lifting and then transformed data set was sequently compressed with each frame unit. Each frame has a flexible bit rate. Also, we proposed the algorithm that compressed data structure was maintained and the scene was decoded by using property of lifting structure.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.11
• /
• pp.2739-2748
• /
• 2009

Hologram and three dimensional quantitative structure activity relationship (3D QSAR) studies for a series of anilinobipyridine JNK3 inhibitors were performed using various alignment-based comparative molecular field analysis (COMFA) and comparative molecular similarity indices analysis (CoMSIA). The in vitro JNK3 inhibitory activity exhibited a strong correlation with steric and electrostatic factors of the molecules. Using four different types of alignments, the best model was selected based on the statistical significance of CoMFA ($q_2\;=\;0.728,\;r_2\;=\;0.865$), CoMSIA ($q_2\;=\;0.706,\;r_2\;=\;0.960$) and Hologram QSAR (HQSAR: $q_2\;=\;0.838,\;r_2\;=\;0.935$). The graphical analysis of produced CoMFA and CoMSIA contour maps in the active site indicated that steric and electrostatic interactions with key residues are crucial for potency and selectivity of JNK3 inhibitors. The HQSAR analysis showed a similar qualitative conclusion. We believe these findings could be utilized for further development of more potent and selective JNK3 inhibitors.

• Korean Journal of Optics and Photonics
• /
• v.11 no.3
• /
• pp.179-186
• /
• 2000

Optical coupling coefficients and misalignment tolerance of 155 Mbps optical transmitter module of passive alignment technology, to be usable in ATM system, B-NT (Broadband Network Termination) system, and 10 G transmission system for information super-highway networks, were calculated, compaired with it's engineer samples, and discussed. These engineer samples of -4.5 dBm maximum output power were packaged in the method of butt coupling of flat-fiber and tested reliability evaluation. Hence the cheap packaging method of optical transmitter module was researched. rched.

• Journal of Species Research
• /
• v.13 no.1
• /
• pp.100-104
• /
• 2024

The purpose of this study was to isolate and identify wild yeasts from soil samples collected in Daegu and Cheongju city, Republic of Korea. To identify the wild yeast strains, pairwise sequence comparisons of D1/D2 region of the 26S rRNA gene sequence were done using Basic Local Alignment Search Tool (BLAST). The cell morphologies were observed by phase contrast microscope and assimilation test are done using API 20C AUX kit. All strains were assigned to the phylum Basidiomycota. Among 13 strains, 11 strains were previously reported, but two strains were unreported from the Republic of Korea. The two unrecorded yeast strains, GW1-3 and PG1-1-10C, belong to the genus Solicoccozyma (family Piskurozymaceae, order Filobasidiales, class Tremellomycetes). The two strains had oval-shaped and polar budding cells. This research showed the morphological and biochemical properties of the two unreported yeast species that had not officially reported in Korea.

• Journal of Species Research
• /
• v.13 no.2
• /
• pp.142-146
• /
• 2024

The purpose of this study was to isolate and identify wild yeasts from soil collected in Daegu City and Cheongyang County, Republic of Korea. Among 11 strains isolated in this study, nine strains were previously reported and two strains were unreported in Republic of Korea. To identify wild yeast strains, pairwise sequence comparisons of the D1/D2 region of the 26S rRNA gene sequence were done using Basic Local Alignment Search Tool (BLAST). The cell morphologies were observed by phase contrast microscope and assimilation test are done using API 20C AUX kit. All strains were assigned to the phylum Basidiomycota. Of the two unrecorded yeast strains, CY-9-10C belongs to the genus Mrakia (family Mrakiaceae, order Cystofilobasidiales, class Tremellomycetes) and PG3-4-10C belongs to the genus Slooffia (family Chrysozymaceae, order Microbotryomycetes incertae sedis, class Microbotryomycetes). Both strains had oval-shaped and polar budding cells. This research described the morphological and biochemical properties of the two unreported yeast species that had not officially reported in Korea.

• Journal of Magnetics
• /
• v.20 no.1
• /
• pp.91-96
• /
• 2015

As many researchers are relentlessly trying to improve the power generation schemes from the power grid, to meet the constantly increasing electricity demand. In this paper, the results of a finite element analysis are carried out to study on a design optimization of an asymmetric air-gap structure in 3-phase Permanent Magnet Brushless DC Motors. To achieve a high efficiency for a 3-phase PM BLDC motor, the asymmetric air-gap structure is proposed considering the rotation direction of a motor. Generally, a single-phase BLDC motor is applied asymmetric air-gap structure for starting. This is because the asymmetric air-gap structure causes reluctance variation so the motor can utilize reluctance torque toward a rotation direction. In this paper, the asymmetric air-gap is applied to 3-phase BLDC SPM motor so it utilizes reluctance torque with alignment torque. A proposed model is designed by 2-D FE analysis and the results are verified by experimental test.

• Journal of Microbiology and Biotechnology
• /
• v.11 no.1
• /
• pp.29-34
• /
• 2001

The mutant enzymes of N-carbamyl-D-amino aicd amidohydrolase (N-carbamylase) from Agrobacterium radiobacter NRRL B11291, showing a negligible activity, were selected from the library generated by random mutagenesis. From the sequence analysis, these mutants were found to contain the amino acids substitutions at Cys172, Glu47, and Glu146. Previously, Cys172 was reported to be necessary for the enzyme catalysis. The chemical modification of the N-carbamylase by carboxyl group specific chemical reagent, 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide(EDC), resulted in a loss of activity. The replacement of glutamic acids with glutamines by site-directed mutagenesis led to aggregation of the enzymes. Mutant enzymes fused with maltose binding protein (MBP) were expressed in soluble form, but were inactive. These results indicate that two glutamic acid residues play an important role in structure and function of the N-carbamylase. Multiple sequence alignment of the related enzymes revealed that Glu47 and Glu146 are rigidly conserved, which suggests that tese residues are crucial for the structure and function of the functionally related C-N hydrolases.