• The Korea Journal of Herbology
• /
• v.25 no.2
• /
• pp.71-79
• /
• 2010

Objectives : In this study, the neuroprotective effects of modified Boyanghwano-Tang (mBHT) and the major medicinal plants, Astragali Radix(AR) and Salviae Miltiorrhizae Radix(SMR) were investigated in transient middle cerebral artery occlusion (tMCAO)-induced ischemic stroke of rats. Methods : mBHT(400 mg/kg) and AR(154 mg/kg) or SMR(62 mg/kg) water extract orally injected in rats after 90 min occlusion of MCA and then allow reperfusion to 24 h. Brain infarction was measured by TTC staining and the expressions of NOS isoforms and apoptotic molecules were determined in ischemic brain by Western blot. Results : The results showed that mBHT has stronger neuropreotective property through inhibitions of the PARP cleaved and caspase-3 activation in ischemic rats, and could reduced infarction volumes comparison of those of AR or SMR, respectively. While, AR extract has an angiogenic property through increasing the expressions of eNOS and VEGF, and SMR extract has a strong anti-inflammatory effects through inhibition of iNOS expression in ischemic brains. Conclusions : These results suggest that mBHT has multifactorial therapeutic advantages through anti-apoptosis, anti-inflammation and angiogenesis for ischemic stroke based on a synergistic combination of ingradients rather than monotherapy.

• Tunnel and Underground Space
• /
• v.17 no.6
• /
• pp.438-447
• /
• 2007

This technical report is to introduce the research on SRM (Synthetic Rock Mass) which was presented in 2007 ISRM Congress at Lisbon by Prof, Fairhurst who speak with emphasis on its importance and potential in rock engineering. The Synthetic Rock Mass approach to jointed rock mass characterization (Pierce et al. 2007) is reviewed relative to existing empirical approaches and current understanding of jointed rock mass behaviour. The review illustrates how the key factors affecting the mechanical behaviour of jointed rock masses may be considered and demonstrates that the SRM approach constitutes a significant step forward in this field. This technique, based on two well-established methods, Bonded Particle Modelling in PFC-3D (Potyondy and Cundall, 2004) and Discrete Fracture Network simulation, employs a new sliding joint model that allows for large rock volumes containing thousands of pre-existing joints to be subjected to any non-trivial stress path. Output from SRM testing includes rock mass brittleness and strength, evolution of the full compliance matrix and primary fragmentation.

• Natural Product Sciences
• /
• v.23 no.1
• /
• pp.35-39
• /
• 2017

D-chiro-inositol (DCI) is a secondary messenger in insulin signal transduction. It is produced in vivo from myo-inositol via action of epimerase. In this study, we evaluated antitumor activity of DCI against human breast cancer both in vitro and in vivo. In order to determine the inhibitory effects of DCI on growth of human breast cancer cells (MDA-MB-231), two different assessment methods were implemented: MTT assay and mouse xenograft assay. MTT assay demonstrated downturn in cell proliferation by DCI treatment (1, 5, 10, 20 and 40 mM) groups by 18.3% (p < 0.05), 17.2% (p < 0.05), 17.5% (p < 0.05), 18.4% (p < 0.05), and 24.9% (p < 0.01), respectively. Also, inhibition of tumor growth was investigated in mouse xenograft model. DCI was administered orally at the dose of 500 mg/kg and 1000 mg/kg body weight to treat nude mouse for 45 consecutive days. On the 45th day, tumor growth of DCI (500 mg/kg and 1000 mg/kg) groups was suppressed by 22.1% and 67.6% as mean tumor volumes were $9313.8{\pm}474.1mm^3$ and $3879.1{\pm}1044.1mm^3$, respectively. Furthermore, breast cancer stem cell (CSC) phenotype ($CD44^+/C24^-$) was measured using flow cytometry. On the 46th day, CSC ratios of DCI (500 mg/kg) and co-treatment with doxorubicin (4 mg/kg) and DCI (500 mg/kg) group decreased by 24.7% and 53.9% (p < 0.01), respectively. Finally, from tumor recurrence assay, delay of 5 days in the co-treatment group compared to doxorubicin (4 mg/kg) alone group was observed. Based on these findings, we propose that DCI holds potential as an anti-cancer drug for treatment of breast cancer.

• Korean Journal of Radiology
• /
• v.22 no.7
• /
• pp.1054-1065
• /
• 2021

Objective: We implemented a novel resectable myocardial model for mock myectomy using a hybrid method of three-dimensional (3D) printing and silicone molding for patients with apical hypertrophic cardiomyopathy (ApHCM). Materials and Methods: From January 2019 through May 2020, 3D models from three patients with ApHCM were generated using the end-diastolic cardiac CT phase image. After computer-aided designing of measures to prevent structural deformation during silicone injection into molding, 3D printing was performed to reproduce anatomic details and molds for the left ventricular (LV) myocardial mass. We compared the myocardial thickness of each cardiac segment and the LV myocardial mass and cavity volumes between the myocardial model images and cardiac CT images. The surgeon performed mock surgery, and we compared the volume and weight of the resected silicone and myocardium. Results: During the mock surgery, the surgeon could determine an ideal site for the incision and the optimal extent of myocardial resection. The mean differences in the measured myocardial thickness of the model (0.3, 1.0, 6.9, and 7.3 mm in the basal, midventricular, apical segments, and apex, respectively) and volume of the LV myocardial mass and chamber (36.9 mL and 14.8 mL, 2.9 mL and -9.4 mL, and 6.0 mL and -3.0 mL in basal, mid-ventricular and apical segments, respectively) were consistent with cardiac CT. The volume and weight of the resected silicone were similar to those of the resected myocardium (6 mL [6.2 g] of silicone and 5 mL [5.3 g] of the myocardium in patient 2; 12 mL [12.5 g] of silicone and 11.2 mL [11.8 g] of the myocardium in patient 3). Conclusion: Our 3D model created using hybrid 3D printing and silicone molding may be useful for determining the extent of surgery and planning surgery guided by a rehearsal platform for ApHCM.

• Archives of Pharmacal Research
• /
• v.11 no.3
• /
• pp.203-212
• /
• 1988

To find antitumor components from the higher fungi of Korea, the mycelia of Favolus alveolarius (Fr.) Quelet were cultured in a liquid medium. The cultured mycelia were extracted with hot water twice, and a high molecular weight fraction was obtained by adding two volumes of ethanol to the extract. Two grams of Fraction A were obtained by dialyzing it. It was further separated into four fractions by gel filtration with Sepharose CL-4B, and they were designated Fractions B, C, D, and E. The results of the antitumor test showed that Fractions A, B, C, D and E had tumor inhibition ratios of 92.3, 78.5, 59.6, 77.4 and 62.2%, respectively. Anthrone test was carried out to determine the contents of total polysaccharide of the five fractions, and they had 46.3, 27.3, 65.3, 64.6, and 46.1%, respectively. The contents of the total protein of the five fractions were 29.4, 13.9, 14.3, 14.3, and 29.1%, respectively. Monosaccharide subunits of each fraction were analyzed with gas chromatography, and glucose, xylose, mannose, galactose and fucose were identified. Fraction A was examined for immunological effects. It increased the count of hemolytic plaque forming cells 12.8 times to that of the control group, and the population of macrophage in peritoneal cavity 3.2 times to that of the control group.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.7
• /
• pp.2205-2212
• /
• 1996

In order to move the body of a walking robot translationally, and step over the obstacles, the walking robot must have at least 3 degrees of freedom for each leg. Therefore each leg of the general walking robots can be composed of 3-link system with 3 revolute joints. In this paper, the colsed form of inverse kinimatic solutions is shown for this general 3R linkage. Moreover, in order to have efficient walking volume in rough terrain, the workspace of each log is obtained considering the twist angles and the offsets in D-H parameters. When we design a walking robot, the information of the walking volume is needed for planning desired trajectories of the feet effectively. Appropriate knowledge of the walking volume can also be used to maximize linear or angular velocity of minimize power of stress. However, since it is impossible to obrain the information of walking volume in 3-D space directly from the kinematic equations, the walking volume can be searched through the edge detection algorithm using the triangle tracer with closed from inverse kinematic solutions. In this study, we present the closed form inverse kinematic solutions for 3R linkage model, and the walking volume of 6 legged walking robot which is modeled after the darking bettle, Eleodes obscura sulcipennis, through the method of edge detection for an arbitrary 2 dimensional shape using triangle tracer.

• Progress in Medical Physics
• /
• v.14 no.1
• /
• pp.34-42
• /
• 2003

In medical imaging, three-dimensional (3D) display using Virtual Reality Modeling Language (VRML) as a portable file format can give intuitive information more efficiently on the World Wide Web (WWW). The web-based 3D visualization of functional images combined with anatomical images has not studied much in systematic ways. The goal of this study was to achieve a simultaneous observation of 3D anatomic and functional models with planar images on the WWW, providing their locational information in 3D space with a measuring implement using VRML. MRI and ictal-interictal SPECT images were obtained from one epileptic patient. Subtraction ictal SPECT co-registered to MRI (SISCOM) was performed to improve identification of a seizure focus. SISCOM image volumes were held by thresholds above one standard deviation (1-SD) and two standard deviations (2-SD). SISCOM foci and boundaries of gray matter, white matter, and cerebrospinal fluid (CSF) in the MRI volume were segmented and rendered to VRML polygonal surfaces by marching cube algorithm. Line profiles of x and y-axis that represent real lengths on an image were acquired and their maximum lengths were the same as 211.67 mm. The real size vs. the rendered VRML surface size was approximately the ratio of 1 to 605.9. A VRML measuring tool was made and merged with previous VRML surfaces. User interface tools were embedded with Java Script routines to display MRI planar images as cross sections of 3D surface models and to set transparencies of 3D surface models. When transparencies of 3D surface models were properly controlled, a fused display of the brain geometry with 3D distributions of focal activated regions provided intuitively spatial correlations among three 3D surface models. The epileptic seizure focus was in the right temporal lobe of the brain. The real position of the seizure focus could be verified by the VRML measuring tool and the anatomy corresponding to the seizure focus could be confirmed by MRI planar images crossing 3D surface models. The VRML application developed in this study may have several advantages. Firstly, 3D fused display and control of anatomic and functional image were achieved on the m. Secondly, the vector analysis of a 3D surface model was defined by the VRML measuring tool based on the real size. Finally, the anatomy corresponding to the seizure focus was intuitively detected by correlations with MRI images. Our web based visualization of 3-D fusion image and its localization will be a help to online research and education in diagnostic radiology, therapeutic radiology, and surgery applications.

• Journal of Environmental Science International
• /
• v.4 no.4
• /
• pp.379-386
• /
• 1995

Permethrin [3-phenox yben zyl(1RS)-cis,tans-3-(2,2-dichloroviny1)-2,2- dimethylcyclopropane carboxylate] insecticides were selected to study adsorption and leaching potentials related to pollution on Commerce silty clay loam soil near Baton Rouge, Louisiana, USA. GLC-ECD chromatogram of permethrin included 32.5 % of cis-pemehin and 67.4 % of trans-permethrin. Extraction efficiencies of is and trmu-pemetun were 92.5 % and 92.3 % in fortified water, respectively and 85.9 % and 88.8 % in fortified soil, respectively. At a 1:10 moi]/water ratio,the Koc values for sis and fan isomers of permethrin were 938 and 877, respectively. Leaching of permethrin was evaluated in soil columns$(5.4 cm i.d. \times 26 cm length)$. Total recoveries of the permethrin applied to the soil column were $84.5\pm3.1%$. When the soil columns were leached with three pore volumes of water, the distributions of cis-permethrin leached were 6.10 % and 0.07 % of amount applied in the untreated zone soil and leachate water, respectively Trans-pemethrin distributions were 5.20 % in the untreated zone soil and 0.05 % in leachate water. Cis and trans-pemethrin was strongly adsorbed to soil. The results of the study showed the strong relationship between adsorption and leaching. Cis and trans-permethrin to be leached into the groundwater in soils with shallow aquifers were suggested a low leaching potential.

• Carbon letters
• /
• v.11 no.3
• /
• pp.192-200
• /
• 2010

Common reed (Fragmites australis), a local invasive grass, was investigated as a possible feedstock for the production of activated carbon. Dried crushed stems were subjected to impregnation with phosphoric acid (30, 40 and 50%) followed by pyrolysis at $400{\sim}500^{\circ}C$ with final washing and drying. Obtained carbons were characterized by determining: carbon yield, ash content, slurry pH, textural properties and capacity to remove color bodies from factory-grade sugar liquor. Produced carbons possessed surface area up to 700 $m^2/g$, total pore volumes up to 0.37 $cm^3/g$, and proved to be microporous in nature. Decolorization of hot sugar liquor at $80^{\circ}C$ showed degrees of color removal of 60 up to 77% from initial color of 1100~1300 ICU, at a carbon dose of 1.0 g/100 ml liquor. No correlation seems to hold between synthesis conditions and % R but depends on the degree of microporosity. A commercial activated carbon N showed a comparative better color removal capacity of 91%. Common reed proved to be a viable carbon precursor for production of good adsorbing carbon suitable for decolorization in the sugar industry, as well as in other environmental remediation processes.

• Journal of Microbiology and Biotechnology
• /
• v.16 no.1
• /
• pp.25-31
• /
• 2006

Changes of CP4 5-enolpyruvylshikimate-3-phosphate synthase (CP4 EPSPS) in the glyphosate-tolerant Roundup Ready soybean were examined using purified CP4 EPSPS produced in cloned Escherichia coli as a control. CP4 EPSPS in genetically modified soybean was detected by twodimensional gel electrophoresis (2-DE) and identified by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) and electrospray ionization tandem mass spectrometry (ESI-MS/MS) with databases. CP4 EPSPS in soybean products was resolved on 2-DE by first isoelectric focusing (IEF) based on its characteristic pI of 5.1, followed by sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) based on its molecular mass of 47.5 kDa. We quantified various percentages of soybean CP4 EPSPS. The quantitative analysis was performed using a 2D software program on artificial gels with spots varying in Gaussian volumes. These results suggested that 2-DE image analysis could be used for quantitative detection of GM soybean, unlike Western blotting.