• ETRI Journal
• /
• 제36권6호
• /
• pp.924-930
• /
• 2014

This paper presents a $0.13{\mu}m$ CMOS 3-level envelope delta-sigma modulation (EDSM) RF signal generator, which synthesizes a 2.6 GHz-centered fully symmetrical 3-level EDSM signal for high-efficiency power amplifier architectures. It consists of an I-Q phase modulator, a Class B wideband buffer, an up-conversion mixer, a D2S, and a Class AB wideband drive amplifier. To preserve fast phase transition in the 3-state envelope level, the wideband buffer has an RLC load and the driver amplifier uses a second-order BPF as its load to provide enough bandwidth. To achieve an accurate 3-state envelope level in the up-mixer output, the LO bias level is optimized. The I-Q phase modulator adopts a modified quadrature passive mixer topology and mitigates the I-Q crosstalk problem using a 50% duty cycle in LO clocks. The fabricated chip provides an average output power of -1.5 dBm and an error vector magnitude (EVM) of 3.89% for 3GPP LTE 64 QAM input signals with a channel bandwidth of 10/20 MHz, as well as consuming 60 mW for both channels from a 1.2 V/2.5 V supply voltage.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2011년도 춘계학술발표대회
• /
• pp.325-326
• /
• 2011

선박관제를 위한 3 차원 GIS 엔진의 설계연구에서 가장 큰 연구성과는 3 차원 구조화, 3 차원 topology 묘사등에 관한 관련 지식과 방안을 제공하고 e-Navigation 을 위한 3 차원 GIS 의 발전방향등을 제시했다는데 의의를 찾을수 있다. 대용량 데이터 및 렌더링 처리에서의 보다나은 성능 구현등에 관한 연구는 향후 추가적인 연구를 위한 과제로 남겨놓았다.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제51권3호
• /
• pp.100-107
• /
• 2002

In this paper, we propose an expert system for electronic interlocking which enhances the safty, efficiency and expanability of the existing system by designing real-time interlocking control based on the interlocking table automatically generated using artificial intelligence approach. The expert system consists of two parts; an interlocking table generation part and a real-time interlocking control part. The former generates automatically the interlocking relationship of all possible routes by searching dynamically the station topology which is obtained from station database. On the other hand, the latter controls the status of station facilities in real-time by applying the generated interlocking relationship to the signal facilities such as signal devices, points, track circuits for a given route. The expert system is implemented in C language which is suitable to implement the interlocking table generation part using the dynamic memory allocation technique. Finally, the effectiveness of the expert system is proved by simulating for the typical station model.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2010년 춘계학술대회논문집
• /
• pp.129-130
• /
• 2010

Design of turbo-compressors has been considered to be a high-tech which only a few early industrialized countries could do efficiently since it requires not only deep understanding of high level gas dynamics and complex fluid dynamics but also accumulation of experiences in the feedback of expensive manufacturing and difficult testing to the design theory and empirical design coefficients. CFturbo is the turbomachinery design software which incorporates traditional well formulated German design technology and latest software technology of 3-dimensional graphics. Fine/Turbo is a powerful tubomachinery-oriented CFD package with quality structured grid topology templates for almost all the tubomachinery configurations for easy, fast and accurate CFD analysis. Rapid and effcient process off turbo-compressor R&D is setup with the combination of CFturbo and Fine/Turbo.

• 대한기계학회논문집A
• /
• 제27권12호
• /
• pp.2101-2109
• /
• 2003

Structural shape optimization offers engineers with numerous advantages in designing shapes of structures. However, excessive relocation of nodes often cause distortion of elements and eventually result in degrade of accuracy and even halts of processes. To overcome these problems, an effective method, Selective Element Method(SEM), has been developed. This paper describes the basic concept of SEM and processes to implement into real-world problem. 2-D and 3-D shape optimization problems have been chosen to show the performance of the method. Though some limitations have been found, it was concluded that SEM can be useful in general shape optimization and even in some special cases such as decision of optimal weld line location.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제53권5호
• /
• pp.368-373
• /
• 2004

Surface visualization can be useful, particularly for internet-based education and simulation system. Since the mesh data size directly affects the downloading and operational performance, the problem that should be solved for efficient surface visualization is to reduce the total number of polygons, constituting the surface geometry as much as Possible. In this paper, an efficient polygon reduction algorithm based on Stokes＇ theorem, and topology preservation to delete several adjacent vertices simultaneously for past polygon reduction is proposed. The algorithm is irrespective of the shape of polygon, and the number of the polygon. It can also reduce the number of polygons to the minimum number at one time. The performance and the usefulness for medical imaging application was demonstrated using synthesized geometrical objects including plane. cube. cylinder. and sphere. as well as a real human data.

• Journal of Electrical Engineering and Technology
• /
• 제9권4호
• /
• pp.1290-1295
• /
• 2014

In this paper, various configurations of octagonal wound transformer core topology, which has previously proved advantages on conventional wound cores, are studied. Each configuration has different joint types and different placement of joint zones on the core. Magnetic flux distributions and power losses of each configuration are analyzed and compared. Comparisons are based on both 2D&3D finite element simulations and experimental studies. The results show that, joint types and their placements on the core cause local flux accumulations and dramatically affect power loss of the core.

• 대한전자공학회논문지SP
• /
• 제46권6호
• /
• pp.43-57
• /
• 2009

여러 시점에서 계측한 3차원 데이터를 통합하는 기술은 3차원 모델링에 매우 중요한 기술이다. 기존의 표면(Surface)통합 방법들은 정합오차와 잡음에 민감하다. 본 논문에서는 표면의 지역적 지형을 이용하는 표면통합 알고리즘을 제안한다. 제안하는 알고리즘은 먼저 인접한 표면 사이에서 일정 지형적 조건을 만족하는 외곽정점의 쌍, 즉 대응정점을 찾아 표면 사이의 지역을 여러 지역으로 구분한다. 다음으로 주성분 분석(PCA)을 통해 각 지역에 대한 최접합 평면(Best Pitting Plane)을 계산하여 표면 사이에 삽입될 삼각형의 생성에 이용한다. 제안하는 알고리즘은 지역적 단위로 지형을 이용하여 인접한 표면을 통합하기 때문에 정합오차와 잡음에 강건하다. 본 논문에서는 또한 변수화(Parameterization)기술을 이용하는 질감(Texture)통합 방법을 제안한다. 제안하는 방법은 통합된 표면을 각 표면의 초기시점으로 변환하고 해당 시점의 질감영상을 투영한다. 투영된 질감영상들을 통합된 표면의 2차원 변수화 표면에 할당하여 표면들이 통합된 이음새를 따라 통합한다. 실험을 통해 제안하는 방법이 얼굴모델링에 효율적임을 보인다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2012년도 전력전자학술대회 논문집
• /
• pp.546-547
• /
• 2012

In the three-phase power system using the three-phase load, when any one-phase is open-phase, the unbalanced current flows and the single-phase power supplied by power supply produces over-current. As a result, the enormous damage and electrical fire can be given to the power system. In order to improve these problems, this paper is proposed a new control circuit topology for open-phase protection using semiconductor devices. Therefore, the proposed open-phase protection device (OPPD) enhances the sensing speed and precision, and has the advantage of simple fitting in the three-phase distribution panel in the field, as it manufactures into small size and light weight. As a result, the proposed OPPD minimizes the electrical fire from open-phase, and contributes for the stable driving of the power system.

• 전자공학회논문지
• /
• 제51권12호
• /
• pp.83-89
• /
• 2014

본 논문에서는 상호 교차결합 차동(complementary cross-coupled differential)구조를 기반으로 조절 주파수 범위가 넓은 광대역 Ku-band 전압 제어 발진기를 $0.18-{\mu}m$ CMOS 공정 기술을 바탕으로 설계 후 제작하여 주파수 조절 범위와 출력 스펙트럼, 위상잡음 등을 측정하여 분석하였다. PMOS와 NMOS가 캐스코드의 push-pull 구조로 연결되어 상호 교차된 차동발진기 구조에 주파수 제어용으로 MOS varactor를 사용한 본 전압 제어 발진기는 발진주파수 14.5GHz의 20%인 2.24GHz 의 매우 넓은 광대역의 주파수 제어를 달성하였음을 측정으로 확인하였다. 3.3V 전원으로부터 18mA의 DC 전류를 공급하였을 때 발진 출력전력은 -1.66dBm으로 측정되었으며, 5V 전원으로부터 47mA의 DC 전류를 공급하였을 때 발진 출력전력은 0.84dBm으로 측정되었다. 위상잡음은 100kHz offset 주파수에서 -74.5dBc/Hz로 측정되었다. 본 논문의 칩은 패드를 포함하여 $1.02mm{\times}0.66mm$의 면적을 갖는다.