• 대한전자공학회논문지SD
• /
• 제45권4호
• /
• pp.131-136
• /
• 2008

[ $0.18-{\mu}m$ ] CMOS공정을 이용하여 근거리 무선통신(22-29 GHz)에서 응용할 수 있는 전력증폭기를 설계하였다. 전도성 기판에 의한 손실을 줄이기 위해서 기판 차폐된 두 가지 형태의 전송선로를 설계하고, 40 GHz 까지 측정 및 모델링하였다. 기판 차폐 microstrip line (MSL) 전송선로의 경우 27 GHz에서 약 0.5 dB/mm의 삽입손실을 나타내었다. 기판 차폐 MSL 구조를 이용한 전력증폭기는 0.83$mm^2$의 비교적 작은 면적을 차지하면서도 27 GHz에서 14.7 dB의 소신호 이득과 14.5 dBm의 출력을 나타내었다. 기판 차폐 coplanar waveguide (CPW) 전송선로의 경우 27 GHz에서 약 1.0 dB/mm 삽입손실을 나타내었으며, 이를 이용한 전력증폭기는 26.5 GHz에서 12 dB의 소신호 이득과 12.5 dBm의 출력을 나타내었다. 본 논문의 결과는 $0.18-{\mu}m$ CMOS공정을 이용한 저가격의 근거리 무선통신 시스템을 구현할 수 있는 가능성을 제시한다.

• 한국의류학회지
• /
• 제37권8호
• /
• pp.1075-1094
• /
• 2013

This study analyzed the lower body type of women aged 20 to 30 to understand their respective characteristics. The research method was restricted to the use of direct measurements data and 3D measurements data of the Sixth Size Korea. Factor analysis, cluster analysis, ANOVA, Duncan's test, discriminant analysis, t-test, and ${\chi}^2$-test were performed for the statistical analysis of the data using SPSS Win 20.0 program. The results of this study are as follows. Lower body type based on 3D measurements were classified into 3 types (obese lower body, long lower body, and small lower body). Lower body type based on direct measurements were classified into 3 types (obese lower body, thick and long lower body, and small lower body). Lower body type based on the direct measurement of sitting pose were classified into 3 types (obese lower body, long and thin lower body, and short lower body). The age differences in the lower body types could be analyzed by an evaluation of the 3D simulation of the lower body.

• 한국의상디자인학회지
• /
• 제26권1호
• /
• pp.17-31
• /
• 2024

The purpose of this study is to propose a modern use of traditional culture by developing creative fashion designs that combine modern and traditional styles based on an analysis of traditional costumes of women in the Tang Dynasty of China. The characteristics of the Tang Dynasty women's costume are as follows. The Tang Dynasty women's costume consists of a short coat (衫, Shan), skirt (裙, Qun), half-arm shawl (半臂, Banbi), and short embroidered cape (帔, Pei). The colors are succinct and elegant, commonly red, yellow, green and navy blue in its entirety. It may be classified by pattern that blend plant patterns, animal patterns, geometric patterns, and two or more mixed patterns. On the basis of the characteristics for traditional women's costume during the Tang Dynasty, the CLO 3D program is employed to develop digital fashion design for four pairs of 3D digital clothing and the production of two pairs of work product. The results are as follows. First, the development of fashion design reflecting the design characteristics of traditional women's clothing in the Tang Dynasty of China could be expressed as fashion design reflecting unique values while connecting tradition and modernity. Second, the 3D virtual clothing program displays an extremely important effect in design deployment and pattern arrangement by having efficiency and convenience in clothing production. The CLO 3D program is closely combined with the 2D design and 3D effect and heightened efficiency while being appropriate to realize sustainability while saving processing time and energy for the sample products. Third, the production of an actual product by facilitating the 3D virtual clothing design may lead to time savings and an effective economy and may allow for the comparison of digital fashion design and actual products as well as confirming the effects of digital fashion design.

• Molecules and Cells
• /
• 제26권6호
• /
• pp.576-582
• /
• 2008

Nervous system development takes place after positional information has been established along the dorsal-ventral (D/V) axis. The initial subdivision provided by a gradient of nuclear dorsal protein is maintained by the zygotic genes expressed along the D/V axis. In this study, an investigation was conducted to determine the range of Dpp function in repressing the expression of eagle (eg) that is present in intermediate neuroblasts defective (ind) and muscle specific homeobox (msh) gene domain. eg is expressed in neuroblast (NB) 2-4, 3-3 and 6-4 of the msh domain, and NB7-3 of the ind domain at the embryonic stage 11. In decapentaplegic (dpp) loss-of-function mutant embryos, eg was ectopically expressed in the dorsal region, while in dpp gain-of-function mutants produced by sog or sca-GAL4/UAS-dpp, eg was repressed by Dpp. It is worthy of note that Dpp produced from sim;;dpp embryos showed that Dpp could function at long range. However, Dpp produced from en-GAL4/UAS-dpp or wg-GAL4/UAS-dpp primarily acted at short-range. This result demonstrated that this discrepancy seems to be due to the repression of Dpp to EGFR signaling in sim;;dpp embryos. Taken together, these results suggest that Dpp signaling works at short-range, but can function indirectly at long-range by way of repression of EGFR signaling during embryonic neurogenesis.

• 한국가축번식학회지
• /
• 제15권1호
• /
• pp.59-66
• /
• 1991

在來山羊의 發情週期와 發情持續期間을 조사하고자 정관 절제 시술한 시정모 산양을 이용하여 90두의 암산양으로부터 3년간에 걸쳐 총 148회의 방정주기를 관찰하였다. 총 481회의 발정주기의 평균기간은 18.1${\pm}$0.5이었고, 11일 이하의 短發情週期가 143회(30%), 12일에서 16일의 中發情週期가 15회(3%), 17일에서 24일의 正常發情週期가 268회(56%) 및 25일 이상의 長發情週期가 55회(11%)로 나타났다. 短發情週期의 발생율은 자연발정후(27%)보다 유기발정후(15.2${\pm}$0.8)일에 유의적(P<0.01)으로 짧았다. 短發情週期에 있어서는 143회중 6일의 기간을 가지는 빈도가 92회로 가장 많았다. 발정지속 시간의 평균은 34.0${\pm}$0.5시간이었는데, 발정지속시간에 있어서는 자연발정과 유기발정간에 유의적인 차이가 없었다. 이상의 결과로 在來山羊의 發情週期는 自然發情後에 있어서 보다 誘起發情間에 차이가 없음을 알 수 있다.

• Design & Manufacturing
• /
• 제13권3호
• /
• pp.29-34
• /
• 2019

Cell phone injection is characterized by its small size and thinness. In addition, the product has a short cycle time, requiring a very short production schedule. To produce more accurate products faster, data from experience in producing similar products is required. In this study, two mobile phone models are presented. In this study, the quality problems caused by molding analysis and actual injection molding were analyzed and made into a database. As a result, it was considered that all the defects in the molding analysis do not affect the product in some cases, rather than appear as defects in the actual product. All defects shown in the molding analysis can be made into a database, and based on this data, it will be possible to obtain an effect that can predict more accurately whether it will cause problems after injection.

• 대한가정학회지
• /
• 제28권4호
• /
• pp.1.1-13
• /
• 1990

Authors have performed the sensory evaluation tests according to each given items after selecting various lines in order to assess the visual effects by the lines in cloth designing. The evaluations were done by means of ranking tests followed by paired comparison tests. The results obtained were as follows : 1. In the item in than "Shoulder width looks wide", the design C3 showed the best visual effect, and then B1, F8, and A5 comes in order. In "Shoulder width looks narrow", they were A2, F5, F7, and B2 in order. 2. In "Bust looks big", the effect was best in F9, and then B1, F5, C3, and A5 and order. "Bust looks small" item showed A3, C1, and F1 in order. 3. In "Waist looks thick", they were B2, D1, and F7 while in "Waist looks thin", they were B3, F8, and D6 in order. 4. In the item in that "Hip looks big", the best effect was in F9, and then E3, C2, and B4 in order. In "Hip looks small", the best one was C1, and then comes. E1, F6, and F8. 5. In "Upper body looks thick", they were D2, D4, F8, C3 and A5 in order whild in "Upper body looks thin", they were A1, F5, and D7 in order. 6. In the item "Lower body lookds thick", they were F9, C2, E3, B3, and D3 in order. In "Lower body looks thin", the best one was C1, and then D1, E2, F6, and F8 comes in order. 7. In "whole body looks thick", they were F9, F3, D3, and A5, and in "Whole body looks thin", they were F5, A1, C1, and D6 in order. 8. In "Height looks tall", the effects were in order of A4, D6, E1, and F7 while in "Height looks short", they were E3, F9, B4, D2, and D1. 8. In "Height looks tall", the effects were in order of A4, D6, E1, and F7 while in "Height looks short", they were E3, F9, B4, D2, and D1. F9, B4, D2, and D1.

• International Journal of Internet, Broadcasting and Communication
• /
• 제15권4호
• /
• pp.178-184
• /
• 2023

AI image generation technology has become a popular research direction in the field of AI, which is widely used in the field of digital art and conceptual design, and can also be used in the process of 3D texture mapping. This paper introduces the production process of 3D texture mapping using AI image technology, and discusses whether it can be used as a new way of 3D texture mapping to enrich the 3D texture mapping production process. Two AI deep learning models, Stable Diffusion and Midjourney, were combined to generate high-quality AI textures. Finally, the lmage to material function of substance 3D Sampler was used to convert the AI-generated textures into PBR 3D texture maps. And applied in 3D environment. This study shows that 3D texture maps generated by AI image generation technology can be used in 3D environment, which not only has short production time and high production efficiency, but also has rich changes in map styles, which can be quickly adjusted and modified according to the design scheme. However, some AI texture maps need to be manually modified before they can be used. With the continuous development of AI technology, there will be great potential for further development and innovation of AI-generated image technology in the 3D content production process in the future.

• 대한수학회지
• /
• 제60권1호
• /
• pp.91-113
• /
• 2023

The polytope of tristochastic tensors of degree three, the Latin polytope, has two kinds of extreme points. Those that are at a maximum distance from the barycenter of the polytope correspond to Latin squares. The remaining extreme points are said to be short. The aim of the paper is to determine the geometry of these short extreme points, as they relate to the Latin squares. The paper adapts the Latin square notion of an intercalate to yield the new concept of a cross-intercalate between two Latin squares. Cross-intercalates of pairs of orthogonal Latin squares of degree three are used to produce the short extreme points of the degree three Latin polytope. The pairs of orthogonal Latin squares fall into two classes, described as parallel and reversed, each forming an orbit under the isotopy group. In the inverse direction, we show that each short extreme point of the Latin polytope determines four pairs of orthogonal Latin squares, two parallel and two reversed.

• 한국초전도ㆍ저온공학회논문지
• /
• 제14권3호
• /
• pp.13-17
• /
• 2012

KEPCO Research Institute has been researching a Superconducting Fault Current Limiter (SFCL) which is considered one of solutions of fault current problems with Korea Institute of Machinery & Materials (KIMM) and Hanyang University since 2011. In this paper, we fabricated a current limiting module and conducted electrical short circuit tests for checking the validity of the transmission level SFCL design. Based on the short circuit characteristics of the second generation High Temperature Superconductor (HTS), we analyzed the short circuit characteristics of 3 parallel connected superconducting wires. The structure of the HTS wire is as follows: the stainless steel stabilizer of $100{\mu}m$ is laminated on the superconductor layer and under the substrate, both of which are electrically jointed with solder. We fabricated the current limiting module which has 40 series and 6 parallel connections and studied the short circuit characteristics of the module under various voltage levels.