• Advances in materials Research
• /
• 제8권2호
• /
• pp.117-135
• /
• 2019

The lifetime of a gas turbine combustor is typically limited by the durability of its liner, the structure that encloses the high-temperature combustion products. The primary objective of the combustor thermal design process is to ensure that the liner temperatures do not exceed a maximum value set by material limits. Liner temperatures exceeding these limits hasten the onset of cracking which increase the frequency of unscheduled engine removals and cause the maintenance and repair costs of the engine to increase. Hot gas temperature prediction can be considered a preliminary step for combustor liner temperature prediction which can make a suitable view of combustion chamber conditions. In this study, the temperature distribution of ceramic panels for a V94.2 gas turbine combustor subjected to realistic operation conditions is presented using three-dimensional finite difference method. A simplified model of alumina ceramic is used to obtain the temperature distribution. The external thermal loads consist of convection and radiation heat transfers are considered that these loads are applied to flat segmented panel on hot side and forced convection cooling on the other side. First the temperatures of hot and cold sides of ceramic are calculated. Then, the thermal boundary conditions of all other ceramic sides are estimated by the field observations. Finally, the temperature distributions of ceramic panels for a V94.2 gas turbine combustor are computed by MATLAB software. The results show that the gas emissivity for diffusion mode is more than premix therefore the radiation heat flux and temperature will be more. The results of this work are validated by ANSYS and ABAQUS softwares. It is showed that there is a good agreement between all results.

• 한국수학교육학회지시리즈D:수학교육연구
• /
• 제26권3호
• /
• pp.167-202
• /
• 2023

A central problem of mathematics teaching worldwide is probably the insufficient adaptive handling of tasks-especially in computational practice phases and modeling tasks. All students in a classroom must often work on the same tasks. In the process, the high-achieving students are often underchallenged, and the low-achieving ones are overchallenged. This publication uses different modeling of the tennis serve as an example to show a possible solution to the problem and develops and discusses one adaptive task each for middle school, high school, and college using three mathematical models of the tennis serve each time. From model to model within the task, the complexity of the modeling increases, the mathematical or physical demands on the students increase, and the new modeling leads to more realistic results. The proposed models offer the possibility to address heterogeneous learning groups by their arrangement in the surface structure of the so-called parallel adaptive task and to stimulate adaptive mathematics teaching on the instructional topic of mathematical modeling. Models A through C are suitable for middle school instruction, models C through E for high school, and models E through G for college. The models are classified in the specific modeling cycle and its extension by a digital tool model, and individual modeling steps are explained. The advantages of the presented models regarding teaching and learning mathematical modeling are elaborated. In addition, we report our first teaching experiences with the developed parallel adaptive tasks.

• Spatial Information Research
• /
• 제18권5호
• /
• pp.133-142
• /
• 2010

실내 화재와 같은 재난, 재해시의 보행자의 행태를 모델링하거나 건축물의 구조를 분석하기 위해 지난 수십 년간 다양한 보행모델, 또는 화재대피모델들이 연구되어 왔다. 그러나 최근까지 개발된 모델은 대피 시 구조물들에 의해 보행자의 시야가 제한되는 것을 고려하고 있지 않다. 보행자의 시야는 대피에 영향을 미치는 중요한 요인 중 하나이므로, 이를 고려해야 현실적인 시뮬레이션 결과를 도출할 수 있다. 대피시뮬레이션에서 보행자의 시야에 대한 영향을 고려하는 방법은 시야의 제한 정도에 따라서 보행자의 대피 속도를 다르게 하는 것이다. 본 연구에서는 보행자의 시야에 따라 서로 다른 대피 속도를 갖게 하기 위해서 cellular automata를 이용한 floor field 모델을 기반으로 개선된 알고리즘을 제시하였다. 공간구문론(space syntax)을 활용하여 시야에 따라 공간을 분할하고, 동시다발적인 움직임 대신 분할된 공간별로 다른 이동속도를 갖게 하는 개선된 알고리즘을 구현하여 대피의 행태를 적절하게 모델링할 수 있게 하였다. 또한, 본 연구에서는 추후 실내 센서와의 연동을 통한 실시간 시뮬레이션 시스템으로의 개발을 위하여 공간DBMS를 이용한 3차원 보행자 시뮬레이터의 구현과정을 예시하였다. 캠퍼스 건물을 대상으로 개선된 알고리즘의 시뮬레이션 테스트를 수행하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(4)
• /
• pp.33-36
• /
• 2000

To create a more realistic soccer game derived from TV images, we are developing an image synthesis system that generates 3D image sequence from TV images. We propose the method for the team and the pose recognition of players in TV images. The representation includes camera calibration method, team recognition method and pose recognition method. To find the location of a player on the field, a field model is constructed and a player's field position is transformed by 4-feature points. To recognize the team information of players, we compute RGB mean values and standard deviations of a player in TV images. Finally, to recognize pose of a player, this system computes the velocity and the ratio of player(height/width). Experimental results are included to evaluate the performance of the team and the pose recognition.

• Computers and Concrete
• /
• 제2권3호
• /
• pp.215-238
• /
• 2005

This work is based on a nonlinear finite-element model with proven capacity for yielding realistic predictions of the response of reinforced-concrete structures under static monotonically-increasing loading. In it, the material description relies essentially on the two key properties of triaxiality and brittleness and, thus, is simpler than those of most other material models in use. In this article, the finite-element program is successfully used in investigating the behaviour of a series of RC walls under static cyclic loading. This type of loading offers a more strenuous test of the validity of the proposed program since cracks continuously form and close during each load cycle. Such a test is considered to be essential before attempting to use the program for the analysis of concrete structures under seismic excitation in order to ensure that the solution procedure adopted is numerically stable and can accurately predict the behaviour of RC structures under such earthquake-loading conditions. This is achieved through a comparative study between the numerical predictions obtained presently from the program and available experimental data.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.955-960
• /
• 2004

In this study, three dimensional FE analysis of concrete slab track has been performed in order to develop the realistic design of precast concrete slab track. The precast slab track system including the precast concrete slab panel and the grout layer is modeled using the three dimensional solid element with crack softening effect. The input load is computed from the one dimensional beam element model constituting the rail and several discrete springs. To investigate the effect of the longitudinal connection of slab panels, two different systems-continuous and discrete systems - are modeled. The analytical results show that the stresses of both the slab panel and the grout layer are in the range of linear elastic, and, at the interface between two adjacent panels, the primary stresses of the grout layer of the discrete system are higher than those of the continuous system. However, The overall stress levels of the grout layer are very low relative to the strength of th grout.

• Journal of information and communication convergence engineering
• /
• 제13권3호
• /
• pp.189-196
• /
• 2015

In this paper, we present a rotating auto-zeroing offset cancellation technique, which can improve the performance of touch screen sensing circuits. Our target touch screen detection method employs multiple continuous sine waves to achieve a high speed for large touch screens. While conventional auto-zeroing schemes cannot handle such continuous signals properly, the proposed scheme does not suffer from switching noise and provides effective offset cancellation for continuous signals. Experimental results show that the proposed technique improves the signal-to-noise ratio by 14 dB compared to a conventional offset cancellation scheme. For the realistic simulation results, we used Cadence SPECTRE with an accurate TSP model and noise source. We also applied an asymmetric device size (10% MOS size mismatch) to the OP Amp design in order to measure the effectiveness of offset cancellation. We implemented the proposed circuit as part of a touch screen controller system-on-chip by using a Magnachip/SK Hynix 0.18-µm complementary metal-oxide semiconductor (CMOS) process.

• Structural Engineering and Mechanics
• /
• 제3권5호
• /
• pp.475-495
• /
• 1995

In the past, physical models have been proposed, in compliance with the concept of the compressive-force path, for the realistic design of various statically determinate structural concrete members. The present work extends these models so as to encompass indeterminate RC structural forms. Pilot tests conducted on continuous beams and fixed-ended portal frames have revealed that designing such members to present-day concepts may lead to brittle types of failure. On the other hand, similar members designed on the basis of the proposed physical models attained very ductile failures. It appears that, unlike current design approaches, the compressive-force path concept is capable of identifying those areas where failure is most likely to be triggered, and ensures better load redistribution, thus improving ductility. The beneficial effect of proper detailing at the point of contraflexure in an indeterminate RC member is to be noted.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표대회 논문집(III)
• /
• pp.701-705
• /
• 1998

The objective of this study is to develop the practical program which can check the constructible possibility of prestressed concrete box girder bridges for design. Checking constructible possibility is defined as checking the interference of each elements in a PSC box girder bridge and computing the distances of each elements. To check the constructible possibility of a PSC box girder bride, bridge must be modelled using solid in three dimension. By using a 3 dimensional solid modeling system, engineers can get the photo realistic 3D viewing images of the bridge and produce FEM analytic model of it. Users can manipulate their drawings easier and take off quantity of the whole structure and its elements as well as check the constructible possibility of their PSC box girder bridges.

• 대한교통학회지
• /
• 제20권3호
• /
• pp.149-158
• /
• 2002

동적 통행배정모형에서 주로 사용되는 링크 통행비용함수가 현실상황을 제대로 표현하지 못함에 따라, 최근 교통류의 특성을 현실적으로 묘사할 수 있는 여러 형태의 교통류모형(Traffic model)들이 제시되고 있다. 현재까지 개발된 모형들을 차량의 동적 움직임을 표현하는 가장 특징적인 요소인 교통류 전파(flow propagation) 과정에 따라 구분하면 교통량-통행시간(Flow-travel time)간의 관계를 명시적인 함수 형태로 사용하는 경우 (Functional approach)와 Cell transmission model이나 개별차량 또는 몇 개의 차량을 1개의 그룹으로 묶은 미시적인 패킷(package)에 기초한 시뮬레이션 형태로 표현하는 경우로(Non-functional approach) 나눌 수 있다. 그러나 함수형태의 비용함수는 여러 연구에서 실제 차량의 행태를 묘사하는 데에는 한계가 있음을 보여주고 있다. 따라서, 본 연구에서는 차량의 통행시간을 패킷기초의 시뮬레이션으로 묘사하는 기법을 개발하는 데, 수직형 대기행렬모형(Vertical queue model 또는 Point Queue model)으로 개발한다. 개발된 모형의 동적 교통류 표현능력을 검토하기 위하여 교통류의 전파를 시간 종속적으로 재현하는 시뮬레이션 부하기법(Simulation loading algorithm)을 개발하고 개발된 모형을 상용 프로그램과 비교한다. 본 연구에서는 교통류의 기본 변수인 교통량-속도-밀도간의 관계와 통행시간간의 관계를 살펴본다. 분석결과, 미시적모형에 비해 상대적으로 간단한 전파규칙(propagation rule)을 사용함에도 불구하고 현실적인 교통류에서 나타나는 중요한 특성들을 모두 확인할 수 있었다.FA비율에 있어서 D$_2$, D$_3$, D$_{6}$이 D$_1$에 비해 유의적으로 높게 나타났지만 D$_1$, D$_4$, D$_{5}$, D$_{7}$, 실험구간 그리고 D$_2$-D$_{7}$, 실험구간 사이에서는 각각 유의적인 차이가 없었다(P<0.05). DHA/EPA의 비율에 있어서 D$_{7}$이 유의적으로 높았으며, D$_{5}$가 유의적으로 낮았다(P<0.05). 상기의 결과를 토대로, 성장과 전어체내 지방산조성에 있어서 뱀장어 치어의 사료내 EPA와 DHA의 첨가효과 미약한 것으로 판단되며, 사료내 LNA (n-3)와 LA(n-6) HUFA을 각각 0.35%, 0.65% 첨가했을 때 WG, SGR, FE, PER이 가장 높았으나, 이전의 실험(Takeuchi, 1980)과 동일한 수준인 n-3와 n-6를 각각 0.5%씩 첨가한 실험구와는 유의적인 차이를 보이지 않았다. 이렇게 볼 때, 뱀장어 치어의 필수지방산은 LNA (n-3), LA (n-6)이고, 그 적정수준은 각각 0.35-0.5%, 0.5-0.65%임을 보여준다.George W, Bush)가 새로운 지도자로 취임하여 얼마 되지 않은 2001년 9월 11일 사상 초유로 본토에서 알 카에다 테러리스트 조직에 의해 공격받게 되었다. 뉴욕의 세계무역센터 빌딩 2개가 완전히 붕괴되고, 펜타곤에 민간 여객기가 충돌하여 많은 사람이 살상 당하고, 전체적으로 세계 80여 개국으로부터의 6천여 명이 살상되었다. 전 세계와 미국은