• 대한기계학회논문집A
• /
• 제33권4호
• /
• pp.409-416
• /
• 2009

Standard procedures for a fracture toughness testing require very severe restrictions for the specimen geometry to eliminate a size effect on the measured properties. Therefore, the used standard fracture toughness data results in the integrity assessment being irrationally conservative. However, a realistic fracture in general structures, such as in nuclear power plants, may develop under the low constraint condition of a large scale yielding with a shallow surface crack. In this paper, cleavage fracture toughness tests have been made on side-grooved PCVN (precracked charpy V-notch) type specimens (10 by 10 by 55 mm) with various crack depths. The constraint effects on the crack depth ratios were evaluated quantitatively by the developed scaling method using the 3-D finite element method. After the fracture toughness correction from scaling model, the statistical size effects were also corrected according to the standard ASTM E 1921 procedure. The results were evaluated through a comparison with the $T_0$ of the standard CT specimen. The corrected $T_0$ for all of the PCVN specimens showed a good agreement to within $5.4^{\circ}C$ regardless of the crack depth, while the averaged PCVN $T_0$ was $13.4^{\circ}C$ higher than the real CT test results.

• 대한의용생체공학회:의공학회지
• /
• 제25권2호
• /
• pp.103-109
• /
• 2004

가상 관절경은 무릎, 어깨 둥 관절에 대한 단층촬영 영상으로부터 관절 내부의 해부학적 구조를 3차원으로 재구성함으로써 광학 관절경을 모사 하는 기법이다. 이 논문에서는 볼륨 렌더링 기법의 일종인 등위면 광선투사법을 이용하여 3차원 영상을 신속하게 생성하는 가상 관절경 기법을 제안한다 여기서 제안하는 등위면 광선투사법은 최대-최소맵을 이용하여 전처리 과정 없이도 실시간에 가까운 속도로 고화질의 영상을 얻을 수 있다. 또한 물리 기반 카메라 제어 모델을 이용함으로써 사용자가 복잡한 해부구조를 가진 관절강 내부에서 가상 카메라를 자유롭게 이동시킬 수 있다. 이러한 고속 렌더링 방법과 현실감 있는 카메라 제어기법을 이용하여 대화식 가상 관절경을 개발하였다.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2006년도 춘계학술발표회 논문집
• /
• pp.369-373
• /
• 2006

본 연구는 3차원 도시 모델링을 위해 라이브러리 기반의 texture mapping 기법을 사용하여 건물 모델을 제작하였다. 이 기법은 건물의 종류 및 특성에 따라 라이브러리 형태로 구축되어있는 texture map을 선택, 출력하여 3차원 건물 프레임에 mapping하는 과정으로 이루어진다. 이 기법의 효과적인 적용을 위해 LiDAR 데이터를 이용하여 건물을 자동적으로 분류하였고, LiDAR 데이터와 수치지도를 이용하여 단위 모델 구현을 위한 건물의 3차원 프레임을 제작하였다. 또한 사실감 있는 건물 texture를 구현하기 위해 실제 건물의 지상사진을 이용하여 texture map 라이브러리를 구축하였다.

• 대한원격탐사학회지
• /
• 제8권2호
• /
• pp.131-145
• /
• 1992

A low cost personal computer and image processing S/W were empolyed to derive Digtal Elevation Model(DEM) of tidal flat from multitemporal LANDSAT TM images, and to create three-dimensional(3D) perspective views of the tidel flat on Komso bay in west coasts of Korea. The method for generation of Digital Elevation Model(DEM) in tidal flat was considered by overlapping techniques of multitemporal LANDSAT TM images and interpolations. The boundary maps of tidal flat extracted from multitemporal images with different water high were digitally combined in x, y, z space with tide in formation and used as an inputcontour data to obtain an elevation model by interpolation using spline function. Elevation errors of less than $\pm$0.1m were achived using overlapping techniques and a spline interpolation approach, respectively. The derived DEM allows for the generation of a perspective grid and drape on the satellite image values to create a realistic terrain visualization model so that the tidal flat may be viewed from and desired direction. As the result of this study, we obtained elevation model of tidal flats which contribute to characterize of topography and monitoring of morphological evolution of tidal flats. Moreover, the modal generated here can be used for simulation of innudation according to tide and support other studies as a supplementary data set.

• Wind and Structures
• /
• 제38권6호
• /
• pp.445-459
• /
• 2024

To model the aeroelasticity in vortex-induced vibrations (VIV) of slender tubular towers, this paper presents an approach where the aerodynamic damping distribution along the height of the structure is calculated not only as a function of the normalized lateral oscillation but also considering the local incoming wind velocity ratio to the critical velocity (velocity ratio). The three-dimensionality of aerodynamic damping depending on the tower's displacement and the velocity ratio has been observed in recent studies. A contour map model of aerodynamic damping is generated based on the forced vibration tests. A sectional calculation procedure based on the spectral method is developed by defining the aerodynamic damping locally at each increment of height. The proposed contour map model of aerodynamic damping and the sectional calculation procedure are validated with full-scale measurement data sets of a rotorless wind turbine tower, where good agreement between the prediction and measured values is obtained. The prediction of cross-wind response of the wind turbine tower is performed over a range of wind speeds which allows the estimation of resulting fatigue damage. The proposed model gives more realistic prediction in comparison to the approach included in current standards.

• 한국위성정보통신학회논문지
• /
• 제11권4호
• /
• pp.102-106
• /
• 2016

스마트 폰의 대중화와 고속 무선 통신 기술의 도움으로 고품질 멀티미디어 콘텐츠가 모바일 기기에서 보편화되고 있다. 특히, Oculus Rift의 출시는 소비자 시장에서 가상현실 기술의 새로운 시대를 열고 있다. 또한 컴퓨터 게임을 보다 사실적 구동을 위한 3D 오디오 기술은 곧 차세대 모바일 기기에 적용될 것이며, 시각적인 것보다 더 광범위한 사실적 경험을 제공 할 것으로 예상된다. 따라서 이 논문에서는 가상현실 기반의 응용 프로그램에서 3D 사운드 모델링을 위한 개념, 알고리즘 및 시스템에 대하여 기술하고자 하며 특히 기하학적 음향 기술 기반의 알고리즘에 초점을 맞추었다. 이를 위하여 먼저, 사운드 전파를 모델링하기 위해 물리적 기반의 기하학적 알고리즘과 다중 채널 기술 중심으로 오디오 렌더링을 위한 중요한 설계 원칙 소개와 오디오 렌더링 파이프 라인을 씬 그래프 기반의 가상 현실 시스템 및 최신 하드웨어 구조 소개를 포함한다.

• Structural Engineering and Mechanics
• /
• 제64권5호
• /
• pp.653-660
• /
• 2017

The aim of this study is to accurately estimate seismic damage and the collapse mechanism of the historical stone masonry minaret "Hafsa Sultan", which was built in 1522. Surveying measurements and material tests were conducted to obtain a 3D solid model and the mechanical properties of the components of the minaret. The initial Finite Element (FE) model is analyzed and numerical dynamic characteristics of the minaret are obtained. The Operational Modal Analysis (OMA) method is conducted to obtain the experimental dynamic characteristics of the minaret and the initial FE model is calibrated by using the experimental results. Then, linear time history (LTH) and nonlinear time history (NLTH) analyses are carried out on the calibrated FE model by using two different ground motions. Iron clamps which used as connection element between the stones of the minaret considerably increase the tensile strength of the masonry system. The Concrete Damage Plasticity (CDP) model is selected in the nonlinear analyses in ABAQUS. The analyses conducted indicate that the results of the linear analyses are not as realistic as the nonlinear analysis results when compared with existing damage.

• Advances in biomechanics and applications
• /
• 제1권1호
• /
• pp.1-14
• /
• 2014

In this paper, a simple and accurate finite element model coupled to quasi-brittle damage law able to describe the multiple cracks initiation and their progressive propagation is developed in order to predict the complete force-displacement curve and the fracture pattern of human proximal femur under quasi-static load. The motivation of this work was to propose a simple and practical FE model with a good compromise between complexity and accuracy of the simulation considering a limited number of model parameters that can predict proximal femur fracture more accurately and physically than the fracture criteria based models. Different damage laws for cortical and trabecular bone are proposed based on experimental results to describe the inelastic damage accumulation under the excessive load. When the damage parameter reaches its critical value inside an element of the mesh, its stiffness matrix is set to zero leading to the redistribution of the stress state in the vicinity of the fractured zone (crack initiation). Once a crack is initiated, the propagation direction is simulated by the propagation of the broken elements of the mesh. To illustrate the potential of the proposed approach, the left femur of a male (age 61) previously investigated by Keyak and Falkinstein, 2003 (Model B: male, age 61) was simulated till complete fracture under one-legged stance quasi-static load. The proposed finite element model leads to more realistic and precise results concerning the shape of the force-displacement curve (yielding and fracturing) and the profile of the fractured edge.

• Steel and Composite Structures
• /
• 제24권4호
• /
• pp.499-512
• /
• 2017

This paper deals with nonlinear dynamic stability of embedded piezoelectric nano-composite separators conveying pulsating fluid. For presenting a realistic model, the material properties of structure are assumed viscoelastic based on Kelvin-Voigt model. The separator is reinforced with single-walled carbon nanotubes (SWCNTs) which the equivalent material properties are obtained by mixture rule. The separator is surrounded by elastic medium modeled by nonlinear orthotropic visco Pasternak foundation. The separator is subjected to 3D electric and 2D magnetic fields. For mathematical modeling of structure, three theories of classical shell theory (CST), first order shear deformation theory (FSDT) and sinusoidal shear deformation theory (SSDT) are applied. The differential quadrature method (DQM) in conjunction with Bolotin method is employed for calculating the dynamic instability region (DIR). The detailed parametric study is conducted, focusing on the combined effects of the external voltage, magnetic field, visco-Pasternak foundation, structural damping and volume percent of SWCNTs on the dynamic instability of structure. The numerical results are validated with other published works as well as comparing results obtained by three theories. Numerical results indicate that the magnetic and electric fields as well as SWCNTs as reinforcer are very important in dynamic instability analysis of structure.

• 한국컴퓨터그래픽스학회논문지
• /
• 제8권3호
• /
• pp.35-42
• /
• 2002

기존의 페인팅 소프트웨어들은 결과적인 면에서 실제 그림과 유사한 결과를 추구할 뿐, 실제 붓의 움직임이나 터치를 사실적으로 재현하려고 하지는 않았다. 이 논문에서는 수묵화를 그리는데 중요한 두 가지 요소 용묵법(用墨法)과 운필법(運筆法)중에서 붓을 운용하는 방법인 운필법(運筆法)을 컴퓨터 그래픽을 통해서 사실적으로 재현하고자 하였다. 이를 위해서 붓을 운용하는데 필요한 수묵 운필의 모든 동작을 캡쳐할 수 있는 5개의 자유도를 가지는 타블렛을 이용하였다. 손으로부터 붓으로, 붓으로부터 물과 먹을 매개로, 종이에 먹이 전달되는 전체 과정을 재현할 수 있는 모델을 설정하고, 이에 따라 사실적인 수묵화 필법을 구현하기 위해 3차원의 붓의 모델, 3차원의 변형 모델, 붓의 털 모델, 교차면 모델), 먹물의 침전 모델 (Ink Deposition Model)로 설정하였고, 이를 통해 실제 수묵화를 그리는 과정과 동일한 제작과정을 통해서 사실적인 붓의 움직임과 번짐이 구현된 수묵화와 유사한 결과물을 얻어낼 수 있었다. 또한 종이에 전달되는 먹과 물의 양을 정확하게 조절하기 위해서 붓의 털과, 교차지점 그리고 종이 모델을 제작하였고, 이들을 통해서 실제 수묵화의 필법을 사실적으로 시뮬레이션 하였다.