• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2022.06a
• /
• pp.818-820
• /
• 2022

포인트 클라우드 데이터는 자율 주행 기술, 가상 현실 및 증강 현실에서 사용될 3차원 미디어 중 하나로 각광 받고 있다. 국제 표준화 기구인 MPEG(Moving Picture Expert Group)에서는 포인트 클라우드 데이터의 효율적인 압축을 위해 G-PCC(Geometry-based Point Cloud Compression) 및 V-PCC(Video-based Point Cloud Compression)의 표준화를 진행 중에 있다. 그 중, G-PCC는 본래 단일 프레임의 압축을 수행하는 정지 영상 압축 방식이지만, LiDAR(Light Detection And Ranging) 센서를 통해 획득된 동적 포인트 클라우드 프레임에 대한 압축의 필요성이 대두됨에 따라 G-PCC 그룹에서는 Inter-EM(Exploratory Model)을 신설하여 LiDAR 포인트 클라우드 프레임의 압축에 관한 연구를 시작하였다. Inter-EM의 압축 비트스트림은 G-PCC 비트스트림과 마찬가지로 효과적인 전송 및 소비를 위해 미디어 저장 포맷인 ISOBMFF(ISO-based Media File Format)으로 캡슐화될 수 있다. 이때, 포인트 클라우드 프레임들은 자율 주행 등의 서비스에 사용하기 위해 시간 도메인뿐만 아니라 공간 도메인을 기반으로도 소비될 수 있어야 하지만, 공간 도메인을 기반으로 콘텐츠를 임의 접근하여 소비하는 방식은 기존 2D 영상의 시간 도메인 기반 소비방식과 차이로 인해 기존에 논의된 G-PCC 캡슐화 방안만으로는 지원이 제한된다. 이에, 본 논문에서는 G-PCC 콘텐츠를 공간 도메인에 따라 소비하기 위한 ISOBMFF 캡슐화 방안에 대한 파일 포맷을 제안하고자 한다.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.26 no.1
• /
• pp.108-113
• /
• 2017

In this paper, we proposed a three-dimensional(3D) scanning system based on laser vision technique for 3D model reconstruction. The proposed scanning system consists of line laser, camera, and turntable. We implemented the 3D scanning system using low quality elements. Although these are low quality elements, we reduced the 3D data reconstruction errors greatly using two methods. First, we developed a maximum brightness detection algorithm. This algorithm extracts the maximum brightness of the line laser to obtain the shape of the object. Second, we designed a new laser control device. This device helps to adjust the relative position of the turntable and line laser. These two methods greatly reduce the measuring noise. As a result, point cloud data can be obtained without complicated calculations.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.6
• /
• pp.645-653
• /
• 2020

Recently studies on how to use the UAV (Unmanned Aerial Vehicle) are actively being conducted, and the National Geographic Information Institute published the 『Work Guidelines for Public Surveying of Unmanned Aerial Vehicles』. However, the guidelines do not provide the optimum shooting conditions required for each application. In this study, we tried to find the suitable shooting conditions for the production of 3D (Three-dimensional) spatial information and orthophoto. To this end, 45 experiments were conducted by various altitudes, overlaps, and camera angles within an above ground level of 150m. For evaluating the 3D modeling by shooting conditions, point densities of 9 verification areas were analyzed, and to evaluate the orthophotos, 1/1,000 digital maps were compared. Considering the quality of the output and the processing time for precise 3D construction, an altitude of 50m, an overlap of 70~80%, and a camera angle of 80~90° are suitable as shooting conditions, and an altitude of 100m and camera angle of 80~90° are suitable for orthophoto generation.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.18 no.6
• /
• pp.303-310
• /
• 2023

A single vision system limits the ability to accurately understand the spatial constraints and interactions between robots and dynamic workers caused by gantry robots and collaborative robots during production manufacturing. In this paper, we propose a 3D pose registration method for dynamic workers based on a multi-domain vision system for safety monitoring in manufacturing environments. This method uses OpenPose, a deep learning-based posture estimation model, to estimate the worker's dynamic two-dimensional posture in real-time and reconstruct it into three-dimensional coordinates. The 3D coordinates of the reconstructed multi-domain vision system were aligned using the ICP algorithm and then registered to a single 3D coordinate system. The proposed method showed effective performance in a manufacturing process environment with an average registration error of 0.0664 m and an average frame rate of 14.597 per second.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.6
• /
• pp.601-606
• /
• 2013

3D scanning is a technique to measure the 3D shape information of the object. Shape information obtained by 3D scanning is expressed either as point cloud or as polygon mesh type data that can be widely used in various areas such as reverse engineering and quality inspection. 3D scanning should be performed as accurate as possible since the scanned data is highly required to detect the features on an object in order to scan the shape of the object more precisely. In this study, we propose the method on finding the location of feature more accurately, based on the extended Biplane SNAKE with global optimization. In each iteration, we project the feature lines obtained by the extended Biplane SNAKE into each image plane and move the feature lines to the features on each image. We have applied this approach to real models to verify the proposed optimization algorithm.

• Korean Journal of Construction Engineering and Management
• /
• v.17 no.3
• /
• pp.32-42
• /
• 2016

In Korea, the absence of BIM use in existing civil structures and buildings is driving a demand for as-built BIM. As-built BIMs are often created using laser scanners that provide dense 3D point cloud data. Conventional static laser scanning approaches often suffer from limitations in their operability due to the difficulties in moving the equipment, the selection of scanning location, and the requirement of placing targets or extracting tie points for registration of each scanned point cloud. This paper aims at reducing the manual effort using a kinematic 3D laser scanning system based on graph-based simultaneous localization and mapping (SLAM) for continuous indoor mapping. The robotic platform carries three 2D laser scanners: the front scanner is mounted horizontally to compute the robot's trajectory and to build the SLAM graph; the other two scanners are mounted vertically to scan the profiles of surrounding environments. To reduce the accumulated error in the trajectory of the platform through loop closures, the graph-based SLAM system incorporates AdaBoost loop closure approach, which is particularly suitable for the developed multi-scanner system providing more features than the single-scanner system for training. We implemented the proposed method and evaluated it in two indoor test sites. Our experimental results show that the false positive rate was reduced by 13.6% and 7.9% for the two dataset. Finally, the 2D and 3D mapping results of the two test sites confirmed the effectiveness of the proposed graph-based SLAM.

• 한국지형공간정보학회:학술대회논문집
• /
• 2002.03a
• /
• pp.23-26
• /
• 2002

시설물 관리 시스템 또는 GIS의 구축에 있어서 도형 정보는 주로 대상물의 2차원 평면 형상과 위치 정보로 구성되어 있다. 따라서 대상물의 실제 형상적 특성과 주변 환경과의 관계를 입체적으로 규명하기 위해서는 3차원 정보가 필요하다. 3차원 정보는 점, 선, 면으로 구성되는 기존 공간 데이터의 경직성을 탈피하고 현실적 세계를 표현할 수 있는 장점이 있다. 특히 기존의 측정 개념으로 접근 할 수 없는 영역에 대한 정보를 획득할 수 있으며, 복잡하고 다양한 형태의 대상물에 대한 정보의 획득이 용이하다. 본 연구에서는 실험적으로 3D 레이저 스캐닝 시스템을 적용하여 공간 데이터를 획득하고 데이터의 특성을 분석하였으며, point cloud 데이터의 처리 및 관리 시스템과의 연계 방안을 제시하고자 하였다.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.42 no.3 s.303
• /
• pp.39-52
• /
• 2005

In this paper, a registration method is presented to register partial 3D point clouds, acquired from a multi-view camera, for 3D reconstruction of an indoor environment. In general, conventional registration methods require a high computational complexity and much time for registration. Moreover, these methods are not robust for 3D point cloud which has comparatively low precision. To overcome these drawbacks, a projection-based registration method is proposed. First, depth images are refined based on temporal property by excluding 3D points with a large variation, and spatial property by filling up holes referring neighboring 3D points. Second, 3D point clouds acquired from two views are projected onto the same image plane, and two-step integer mapping is applied to enable modified KLT (Kanade-Lucas-Tomasi) to find correspondences. Then, fine registration is carried out through minimizing distance errors based on adaptive search range. Finally, we calculate a final color referring colors of corresponding points and reconstruct an indoor environment by applying the above procedure to consecutive scenes. The proposed method not only reduces computational complexity by searching for correspondences on a 2D image plane, but also enables effective registration even for 3D points which have low precision. Furthermore, only a few color and depth images are needed to reconstruct an indoor environment.

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.667-668
• /
• 2015

While the plant projects grow bigger and global attention to the plant is increasing, efficient space arrangement is not working in plant project because of the complex structure in installing the equipment unlike the construction project. In addition to this, presently, problem in installation process caused by the disagreement between floor plan and real spot is rising. Therefore the target of this research is to solve the problems and reaction differences, caused by changing the space arrangement in installing the equipment of plant construction. And this research suggests the equipment arrangement method for construction and related processes. To solve the problem, 3D cloud point data of space and equipment is collected by 3D laser scanning and the space matching is operated. In processing the space matching, data is simplified by applying the octree algorithm. This research simplifies the 3D configuration data acquired by 3D scanner equipment through the octree algorithm, and by comparing this data, identifies the space for target equipment, and finally suggests the algorithm that makes the auto space arrangement of equipment possible in construction site and also suggests the process to actualize this algorithm.

• Ecology and Resilient Infrastructure
• /
• v.7 no.2
• /
• pp.90-96
• /
• 2020

Recently, a method that applies laser scanning (LS) that acquires vegetation information such as the vegetation habitat area and the size of vegetation in a point cloud format has been proposed. When LS is used to investigate the physical shape of vegetation, it has the advantage of more accurate and rapid information acquisition. However, to examine uncertainties that may arise during measurement or post-processing, the process of adjusting the data by the actual data is necessary. Therefore, in this study, the physical structure of stems, branches, and leaves of woody vegetation in an artificially formed river channel was manually investigated. The obtained results then compared with the information acquired using the three-dimensional terrestrial laser scanning (3D TLS) method, which repeatedly scanned the target vegetation in various directions to obtain relevant information with improved precision. The analysis demonstrated a negligible difference between the measurements for the diameters of vegetation and the length of stems; however, in the case of branch length measurement, a relatively more significant difference was observed. It is because the implementation of point cloud information limits the precise differentiation between branches and leaves in the canopy area.