• 수산해양기술연구
• /
• 제46권3호
• /
• pp.248-256
• /
• 2010

Acoustic side-aspect target strength (TS) of living Japanese anchovy (Engraulis japonicus) was measured at 120kHz during in situ experiments. The data were collected by lowering and horizontally projecting the splitbeam transducer into the anchovy school. For analysis and interpretation of the side-aspect TS data, acoustic theoretical model, based on the fish morphology, and dorsal-aspect TS data were used. Total length of the anchovy ranged from 6.6 to 12.8cm (mean length 9.3cm). The side-aspect TS distributed between -40 and -55dB, has an obvious length dependency. The mean side-aspect TS of the anchovy was -47.8dB, and the TS was about 2dB higher than mean TS generated from dorsal-aspect measurements. With reference to maximum TS, the results of the side-aspect TS were distributed within the range of the theoretical and dorsal-aspect TS. Apparently these tendency indicates that side-aspect TS measured from the study is useful data. These in situ measurements of side-aspect TS can be applied to improve acoustic detection and estimates of the anchovy, and is necessary to measure with a various frequency and length for making enhance data.

• 한국산업보건학회지
• /
• 제30권2호
• /
• pp.153-162
• /
• 2020

Objectives: 3D printing technologies have become widely developed and are increasingly being used for a variety of purposes. Recently, the evaluation of 3D printing operations has been conducted through chamber test studies, and actual workplace studies have yet to be completed. Therefore, the objective of this study was to determine the emission of volatile organic compounds(VOCs), metals, and particles from printing operations at a workplace. This included monitoring conducted at a commercial 3D printing service workplace where the processes involved material extrusion, material jetting, binder jetting, vat photo polymerization, and powder bed fusion. Methods: Area samples were collected with using a Tenax TA tube for VOC emission and MCE filter for metals in the workplace. For particle monitoring, Mini Particle Samplers(MPS) were also placed in the printer, indoor work area, and outdoor area. The objective was to analyze and identify particles' size, morphology, and chemical composition using transmission electron microscopy with energy dispersive spectroscopy(TEM-EDS) in the workplace. Results: The monitoring revealed that the concentration of VOCs and metals generated during the 3D printing process was low. However, it also revealed that within the 3D printing area, the highest concentration of total volatile organic compounds(TVOC) was 4,164 ppb at the vat photopolymerization 3D printing workplace, and the lowest was 148 ppb at the material extrusion 3D printing workplace. For the metals monitoring, chromium, which, is carcinogenic for humans, was detected in the workplace. As a characteristic of the particles, nano-sized particles were also found during the monitoring, but most of them were agglomerated with large and small particles. Conclusions: Based on the monitoring conducted at the commercial 3D printing operation, the results revealed that the concentration of VOCs and metals in the workplace were within Korea's occupational exposure limits. However, due to the emission of nano-sized particles during 3D printing operations, it was recommended that the exposure to VOCs and metals in the workplace should be minimized out of concern for workers' health. It was also shown that the characteristics of particles emitted from 3D printing operations may spread widely within an indoor workplace.

• Asian-Australasian Journal of Animal Sciences
• /
• 제33권3호
• /
• pp.480-489
• /
• 2020

Objective: Sow milk (SM) may not be able to meet the piglet's nutritional needs in late lactation. Hence, this study was conducted to investigate the effects of early commercial milk (CM) supplement on the mucosal morphology, bacterial community and bacterial metabolites in jejunum of piglets. Methods: Ten litters of newborn piglets ([Yorkshire×Landrace]×Duroc) were randomly divided into 2 groups of 5 litters. The piglets in the control group were suckled by the sow (SM), while the piglets in the treatment group (CM supplement) were supplemented with a CM supplement along with suckling from d 4 to d 28 of age. Results: No significant differences were observed about jejunal mucosal morphology on d 28 and d 35 between two groups. On d 28, the activity of lactase in the jejunum was significantly decreased in the CM group, while the activity of sucrase and the ratio of maltase to lactase were significantly increased (p<0.05). On d 35, the activity of maltase in the jejunum was significantly increased in the CM group (p<0.05), and maltase to lactase ratio tended to increase in the CM group (p = 0.065). In addition, piglets in the CM group had a higher abundance of Clostridium XI, Tuicibater, and Moraxella in the jejunum on d 28, while the abundance of Lactobacillus was significantly increased on d 35 (p<0.05). Conclusion: The early CM supplement improved the maturation of the jejunum to some extent by enhancing the maltase and sucrase activities. Moreover, the early CM supplement could help maintain the homeostasis of internal environment in jejunum by increasing the microbial-derived metabolites.

• 한국전기전자재료학회논문지
• /
• 제17권1호
• /
• pp.112-117
• /
• 2004

$Y_2$$_{-x}$G $d_{x}$ $O_3$:E $u^{3+}$(x=0.0, 0.3, 0.6, 1.0, 1.4) luminescent thin films have been grown on Si (100) substrates using pulsed laser deposition. The films grown under different deposition conditions have been characterized using microstructural and luminescent measurements. The crystallinity, the surface morphology and photoluminescence (PL) of the films are highly dependent on the amount of Gd. The photoluminescence (PL) brightness data obtained from $Y_2$$_{-x}$G $d_{x}$ $O_3$:E $u^{3+}$ films grown under optimized conditions have indicated that Si (100) is one of promised substrates for the growth of high quality $Y_2$$_{-x}$G $d_{x}$ $O_3$:E $u^{3+}$ thin film red phosphor. In particular, the incorporation of Gd into $Y_2$ $O_3$ lattice could induce a remarkable increase of PL. The highest emission intensity was observed with $Y_{1.35}$G $d_{0.60}$ $O_3$: $E^{3+}$, whose brightness was increased by a factor of 1.95 in comparison with that of $Y_2$ $O_3$:E $u^{3+}$ films.3+/ films.films.lms.

• 대한기계학회논문집A
• /
• 제40권10호
• /
• pp.865-871
• /
• 2016

조직 공학에서는 전통적인 인공지지체 제작 방식인 가스 발포, 염 침출, 스폰지 복제 그리고 동결주조 법 등이 이용되고 있다. 하지만 다양한 공극 형태 및 크기를 가지고 있어서 세포 상호 작용 효과 및 충분한 기계적 특성에 한계가 있다. 그러나 열 용해 적층 법은 조직공학에서 폴리머 재료를 이용하여 다양한 3차원 인공지지체를 제작할 수 있는 가장 적절한 기술이다. 따라서 본 연구에서는 PCL 몰드를 제작하고 실리카와 알긴산 나트륨 염을 포함하는 세라믹 슬러리를 제조하여 몰드에 주입시켰으며, 1일 동안 자연 건조를 시켰다. 제작된 3차원 슬러리 몰드는 PCL 몰드의 제거 및 슬러리를 경화시키기 위해 $100^{\circ}C$의 오븐에서 2시간 열처리 되었고, 열처리 후에 $1100^{\circ}C$에서 소결되었다. 제작된 인공지지체는 주사전자현미경을 통해 관찰되었고, 압축 시험을 통해 알긴산 나트륨 염의 혼합량에 따른 인공지지체의 기계적 특성은 평가되었다.

• Bulletin of the Korean Chemical Society
• /
• 제34권6호
• /
• pp.1632-1636
• /
• 2013

$Ga_2O_3$ one-dimensional (1D) nanostructures were synthesized by using a thermal evaporation technique. The morphology, crystal structure, and sensing properties of the $Ga_2O_3$ nanostructures functionalized with Pt to $NO_2$ gas at room temperature under UV irradiation were examined. The diameters of the 1D nanostructures ranged from a few tens to a few hundreds of nanometers and the lengths ranged up to a few hundreds of micrometers. Pt nanoparticles with diameters of a few tens of nanometers were distributed around a $Ga_2O_3$ nanorod. The responses of the nanorods gas sensors fabricated from multiple networked $Ga_2O_3$ nanorods were improved 3-4 fold at $NO_2$ concentrations ranging from 1 to 5 ppm by Pt functionalization. The Pt-functionalized $Ga_2O_3$ nanorod gas sensors showed a remarkably enhanced response at room temperature under ultraviolet (UV) light illumination. In addition, the mechanisms via which the gas sensing properties of $Ga_2O_3$ nanorods are enhanced by Pt functionalization and UV irradiation are discussed.

• 농업과학연구
• /
• 제44권4호
• /
• pp.513-518
• /
• 2017

Soybean, one of most widely used swine feed component in the world, contains non-starch polysaccharides (NSP). The digestive system of weaned pigs is not yet fully developed, and thus weaned pigs cannot easily digest diets based on corn and soybean meal. Dietary exogenous enzymes supplementation has been intensively investigated to assist digestion of anti-nutritional factors, such as NSP. This experiment was conducted to investigate the effects of dietary enzyme cocktail on growth performance, intestinal morphology, and nutrient digestibility of weaned pigs. A total 36 weaned pigs ($5.92{\pm}0.48kg\;BW$; 28 d old) were randomly allotted to 2 dietary treatments (3 pigs/pen, 6 replicates/treatment) in a randomized complete block design. The dietary treatments were a typical diet based on corn and soybean meal (CON) and CON with 0.05% enzyme cocktail (Cocktail; mixture of xylanase, ${\alpha}-amylase$, protease, ${\beta}-glucanase$, and pectinase). Pigs were fed their respective diets for 6 wk. Growth performance, morphology of ileum, apparent ileal digestibility (AID) and apparent total tract digestibility (ATTD) of dry matter, crude protein, and energy of weaned pigs were measured. No significant differences (p > 0.05) were observed for growth performance for the duration of the experimental period, and morphology of ileum, and nutrient digestibility between CON and Cocktail treatment groups. Therefore, the results from the current study indicated that enzyme cocktail supplementation in diets had no influence on growth performance, intestinal morphology, and nutrient digestibility of weaned pigs.

• 한국유기농업학회지
• /
• 제26권1호
• /
• pp.141-149
• /
• 2018

This experiment was conducted to investigate the effects of multi-enzyme on growth performance, intestinal morphology, and nutrient digestibility of weaned pigs. A total 36 weaned pigs ($5.92{\pm}0.48kg\;BW$; 28 d old) were randomly allotted to 2 dietary treatments (3 pigs/pen, 6 replicates/treatment) in a randomized complete block design. The dietary treatments were a typical diet based on corn and soybean meal (CON) and CON with 0.1% multi-enzyme (Multi; mixture of ${\beta}-mannanase$, xylanase, ${\alpha}-amylase$, protease, ${\beta}-glucanase$, and pectinase). Pigs were fed their respective diets for 6 wk. Measurements were growth performance, morphology of ileum, apparent ileal digestibility and apparent total tract digestibility of dry matter, crude protein, and energy of weaned pigs. There were no significant differences on growth performance during overall experimental period. No differences were found for the morphology of ileum and nutrient digestibility between CON and Multi groups. Therefore, the results in the current study indicated that multi-enzyme supplementation in diets had no effects on growth performance, intestinal morphology, and nutrient digestibility of weaned pigs.

• 한국지능시스템학회논문지
• /
• 제23권3호
• /
• pp.249-255
• /
• 2013

본 논문에서는 해양 환경에서 획득한 IR 영상으로부터 웨이블렛 변환을 이용한 크기 변화에 무관한 물표 탐지 알고리즘을 제안한다. 모폴로지 연산을 이용하여 영상의 잡음을 제거한 후 2-D 이산 Haar 웨이블렛 변환(DHWT) 기법을 통해 수평 방향 에지(HL), 수직 방향 에지(LH), 대각선 방향 에지(HH) 영상들을 생성한다. 해양 환경을 고려하여, 웨이블렛의 각 레벨에서 수평과 수직 에지 영상을 가우시안 블러링을 수행하고 블러링된 수직 및 수평 에지들을 서로 곱하여 하나의 영상으로 결합하여 saliency map을 생성한다. 그런 다음 saliency map을 이진화 하여 물표 후보 영역을 추출한다. 마지막으로 물표 후보 영역에서 소영역 제거를 통해 최종적인 물표 영역을 추출한다. 실험결과에서는 제안된 알고리즘의 타당성을 보인다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제9권1호
• /
• pp.5-8
• /
• 2007

We have investigated the superconducting properties and surface morphology of $Sm_xBa_yCu_3O_{6+z}$ thin films deposited on LMO/IBAD-MgO/Hastelloy which prepared with different composition ratio by co-evaporation method(EDDC, Evaporation using Drum in Dual Chambers). We observed the composition ratio of SmBCO thin films by EDS analysis. We fabricated SmBCO thin film with critical current density of $1.5{\times}10^6A/cm^2$ at composition ratio of SM:Ba:Cu=1.10:2.01:3(at 77 K self-field). And, we confirmed that substitution of Sm-Ba did not occur at Cu rich phase by EDS analysis.