• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.6 no.4
• /
• pp.375-388
• /
• 1994

When conducting movable bed tests in a narrow wave tank, the hydrodynamics and morphology are assumed to be two-dimensional; hence, any three-dimensional patterns such as cross-tank variations of the profiles are neglected or averaged to represent the mean profiles at the measuring time. In this paper, six movable bed tests were carried out with a fairly fine sand to investigate (1) whether or not three-dimensional features can occur in relatively narrow wave tanks, and (2) various possible interrelationships and causes of the three-dimensionality. These movable bed studies suggested that there was a relatively slow feedback between the hydrodynamics and the morphology that led to initiation and growth of 3-D morphological features, resulting in cross-tank profile variations under certain stages of profile development, especially when the profile approached an equilibrium with overall stability.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.12
• /
• pp.1093-1100
• /
• 2014

The goal of this paper is to investigate preliminary the applicability of 3D printing technologies for the development of the hot bulk forming process and die. 3D printing technology based on the plastic material was applied to the preform design of the hot forging process. Plastic hot forging dies were fabricated by Polyjet process for the physical simulation of the workpiece deformation. The feasibility of application of Laser-aided Direct Metal Rapid Tooling (DMT) process to the fabrication of the hot bulk metal forming die was investigated. The SKD61 hot-working tool steel was deposited on the heat treated SKD61 using the DMT process. Fundamental characteristics of SKD 61 hot-working tool steel deposited specimen were examined via hardness and wear experiments as well as the observation of the morphology. Using the results of the examination of fundamental characteristics, the applicability of the DMT process to manufacture hot bulk forming die was discussed.

• Wind and Structures
• /
• v.38 no.5
• /
• pp.381-398
• /
• 2024

This study presents a mode analysis of 3D turbulent velocity data around a square-section building model to identify the dynamic system for Kármán-type vortex shedding. Proper orthogonal decomposition (POD) was first performed to extract the significant 3D modes. Magnitude-squared coherence was then applied to detect the phase consistency between the modes, which were roughly divided into three groups. Group 1 (modes 1-4) depicted the main vortex shedding on the wake of the building, with mode 2 being controlled by the inflow fluctuation. Group 2 exhibited complex wake vortexes and single-sided vortex phenomena, while Group 3 exhibited more complicated phenomena, including flow separation. Subsequently, a third-order polynomial regression model was used to fit the dynamics system of modes 1, 3, and 4, which revealed average trend of the state trajectory. The two limit cycles of the regression model depicted the two rotation directions of Kármán-type vortex. Furthermore, two characteristic periods were identified from the trajectory generated by the regression model, which indicates fast and slow motions of the wake vortex. This study provides valuable insights into 3D mode morphology and dynamics of Kármán-type vortex shedding that helps to improve design and efficiency of structures in turbulent flow.

• The Journal of Korean Academy of Prosthodontics
• /
• v.8 no.1
• /
• pp.80-84
• /
• 1968

Observing the morphology of the incisal edges, the time of the loss of mamelon, the decrement rate of the mamelon and the increment rate of the flat edges in the lower incisors among 576 Korean from 7 to 16 years old, the author obtained the following results; 1) The morphology of the incisal edges of the lower incisors immediately after completing eruption is as follows; The lower central incisors show that three nodule is around 65%, flat edge is around 27%, two nodule is around 7% and the central prominence of the incisal edge is 2% The lower lateral incisors show that three nodule is around 23%, flat edge is 24.5%, two nodule is 4 to 12% and the central prominence of the incisal edges around 44%. 2) The loss of mamelon may start at the age of 10. 3) The decrement rate of the mamelon beyond 12 years old is above 80% in the lower central incisors and 70% in the lower lateral incisors. 4) The increment rate of the flat edges beyond 11 years old is above 170% in the lower central incisors and 30% in the lower lateral incisors. 5) None of significant differences are found between right and left sides.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.35-35
• /
• 2023

The main reason for its instability is sediment scouring downstream of hydraulic structures. Both physical and numerical models have been used to investigate the influence of soil properties on scour hole geometry. Nevertheless, no research has been conducted on resistance parameters that affect sedimentation and erosion. In addition, auxiliary structures like wing walls, which are prevalent in many real-world applications, have rarely been studied for their impact on morphology. The hydraulic characteristics of steady flow through a boxed culvert are calibrated using a 3D Computational Fluid Dynamics model compared with experimental data in this study, which shows a good agreement between water depth, velocity, and pressure profiles. Test cases showed that 0.015 m grid cells had the lowest NRMSE and MAE values. It is also possible to quantify sediment scour numerically by testing roughness/d₅₀ ratios (c_s) and diversion walls at a meander flume outlet. According to the findings, c_s = 2.5 indicates a close agreement between numerical and analytical results of maximum scour depth after the culvert; four types of wing walls influence geometrical deformation of the meander flume outlet, resulting in erosion at the concave bank and deposition at the convex bank; two short headwalls are the most appropriate solution for accounting for small changes in morphology. A numerical model can be used to estimate sediment scour at the meander exit channel of hydraulic structures based on the roughness parameter of soil material and headwall type.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1514-1517
• /
• 2005

The $(Y,Gd)BO_3:Eu^{3+}$ phosphor was made by coprecipitation method. The precipitated powders were amorphous. The value of pH in the process of coprecipitation was critical for the luminescence of phosphors. The particle size and morphology were influenced by pH value. The lower calcination temperature and hydrothermal synthesis leads to the distortion of lattices. The distorted lattices changed the symmetry of $Eu^{3+}$ site. The broken inversion symmetry in the distorted lattice caused the increased emission of $^5D_0{\rightarrow}^7D_2$ transition.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.667-667
• /
• 2013

Optimizing morphology of the front surface with three dimensional structures (3D) in solar cell is essential element for not only effectivelight harvesting but also carrier collection and separation without the cost burden in process. We designed a three-dimensionally ordered front surface with wet chemical etching. Wet chemical etching is a proper way to have three dimensional structures. The method efficiently transmits the incident light at the front surface to a Si absorber and has competitive price in manufacturing when comparing with reactive ion etching (RIE) to have three dimensional structures. This indicates that optimized front surface with three dimensional structures by wet chemical etching will bring effective light management in solar cells.

• Proceedings of the KIEE Conference
• /
• 1995.07b
• /
• pp.989-991
• /
• 1995

In this paper, we present a new morphological texture spectrum approach to obtain a surface orientation using the variation of texture image caused by projective distortions. Under the assumption that the surface of texture image is smooth continuous, and specially plane or sphere, we apply the mathematical morphology and texture spectrum in order to compute the 3-D surface orientation. If the surface of texture image is plane, the surface orientation can be obtained through a simple procedure. If the surface of texture image is sphere, we find the centroids of texels, and may compute several major axes, their slopes, and vanishing points. Using the texture spectrum between the intersections of the vanishing points and the size of elements in each texels, we can find the surface orientation of texels on the sphere.

• Advances in biomechanics and applications
• /
• v.1 no.2
• /
• pp.111-126
• /
• 2014

The microarchitecture of trabecular bone plays a significant role in mechanical strength due to its load-bearing capability. However, the complexity of trabecular microarchitecture hinders the evaluation of its morphological characteristics. We therefore propose a new classification method based on static multiscale theory and dynamic finite element method (FEM) analysis to visualize a three-dimensional (3D) trabecular network for investigating the influence of trabecular microarchitecture on load-bearing capability. This method is applied to human vertebral trabecular bone images obtained by micro-computed tomography (micro-CT) through which primary trabecular bone is successfully visualized and extracted from a highly complicated microarchitecture. The morphological features were then analyzed by viewing the percolation of load pathways in the primary trabecular bone by using the stress wave propagation method analyzed under impact loading. We demonstrate that the present method is effective for describing the morphology of trabecular bone and has the potential for morphometric measurement applications.

• Journal of the Korean institute of surface engineering
• /
• v.30 no.2
• /
• pp.104-110
• /
• 1997

Conventional hexavlent chromium electroplating baths deposit the matal at low cathode efficiency and have poor covering and throwing power. The processs also generate hazardous wastes. To overcome many of the disadvantages of hexavalent chromium plating the use of trivalent chromium has advocted. After Yoshida, who first studied trivalent chromium plating, using ammonium sulfate and urea, there are numerous report describing the trivalent chromium electropating process using complexing agents. This study investigaten trivalent chromium plating electrolyte solutious containing formate as a complexing agent and ammouim chloride for conducting agent. The effects of composition and operating conditions on deposits and current efficiencies were investigated in trivalent chromium plating baths by analyzing the relationship pulse conditions and surface morphology The surface morphology of the deposits was observed by SEM. pulse electrolysis has been effective on obtaining a smooth with high current efficiency comparing with D.C. electrolysis in trivalent chromium solution.