• 한국전자거래학회지
• /
• 제1권1호
• /
• pp.141-157
• /
• 1996

Data sharing is a major challenge to implement CALS. STEP is the international standard for the product model data exchange among heterogeneous systems and plays a key role in CALS. Advances in computer networks are rapidly changing the product development processes. The network oriented modeling system premises to integrate design activities across the enterprise. To achieve goals of CALS 3-dimensional concurrent modeling that complies international standard is required since integrity and common perception of product data can be assured. This paper presents 3-dimensional concurrent geometric modeling on high speed network using STEP and methodologies.

• 한국정보통신학회논문지
• /
• 제13권5호
• /
• pp.877-886
• /
• 2009

본 논문은 웹 기반 3D 패션몰을 위한 의복 시뮬레이션 시스템의 설계 기법 및 구현 방법에 대해 제한한다. 웹 3D 패션몰은 마우스 조작이 쉬운 Web3D 저작툴인 ISB로 구현하였고, 3D 인체 모델과 의상 아이템 모델은 3D MAX를 이용하여 로폴리곤 모델링으로 제작하였고, 생성된 3D 인체 모델과 의상 아이템 모델을 XML 형식으로 출력시켜 저장한 후, Direct3D를 이용하여 제작된 ActiveX 컨트롤을 사용하여 웹상에서 3D 인체 모델과 의상 아이템 모델의 정합과 애니메이션을 구현하였다. 또한 텍스타일 팔레트를 제작하여 의상 아이템 모델에 맵핑하는 과정을 알파블 렌딩 기법을 적용하여 구현하였다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2008년도 정기 학술대회
• /
• pp.269-274
• /
• 2008

It is attempted that the standardization of the construction, globalization of the engineering construction and an information oriented construction spread by setting a goal of the advanced construction industry and productivity increase of human resources within the country. Hence, it has been brought in the information oriented construction of BIM based technology for the field of construction and equipment of Korea. The current study that examines the possibility of application of 3D ; that is BIM based programs of building equipment, and make better the problems of 3D building equipment system through the Pilot Test, indicates the way of growth development about the construction of building equipment process system.

• 한국기계가공학회지
• /
• 제19권9호
• /
• pp.59-70
• /
• 2020

Three-dimensional (3D) design data is used for various purposes throughout the life cycle of a plant construction project. Plant 3D CAD systems support 3D modeling based on specs-catalogs, which contain data that are used for different purposes such as design, procurement, production, and handover. Therefore, it is important to share the spec-catalog data in the 3D design model with other application systems. Sharing this data thus requires a system that extracts spec-catalog data from plant 3D CAD systems and converts them into neutral model data. In this paper, we analyze equipment spec-catalog data of plant 3D CAD systems and, based on these analyses, define the data structure for neutral spec-catalog data. We subsequently propose a procedure that translates native spec-catalog data to neutral model data and develop a prototype system that performs this operation. The proposed method is then experimentally validated for the test spec-catalog data.

• Journal of information and communication convergence engineering
• /
• 제1권2호
• /
• pp.82-87
• /
• 2003

We are able to work on the shared virtual space in Web-based Collaborative Design System using only Internet and Web browser. Then the users will share 3D objects and must be able to pick the objects effectively which they want to manipulate. In this paper, picking is implemented not only by computing intersection of mouse pointer with the objects of the virtual world, but also by using capabilities and attributes of scene graph node, by setting bounds intersection testing instead of geometric intersection testing, by limiting the scope of the pick testing, using Java 3D. These methods can reduce the computation of picking and can pick 3D objects effectively and easily using the system of hierarchy.

• 한국정보과학회논문지:시스템및이론
• /
• 제30권11호
• /
• pp.621-628
• /
• 2003

본 논문은 한 장의 영상 속에 포함되어 있는 물체들이 외관상의 3차원 운동이 가능하도록 하는 방법을 제시한다. 이전 연구들은 여러 장의 영상으로부터 영상 기반 모델링 기법들을 이용하여 3차원 모델을 생성하거나 소실점을 이용한 카메라 보정을 통하여 장면을 입방체로 모델링하여 3차원 모델을 생성하는 방식으로 접근하였다. 그러나 본 논문에서는 장면의 기하학적 정보나 카메라 보정 없이 장면 속 물체의 영상 기반 운동(image-based motion)의 가능성을 제시한다. 구현된 시스템은 영상을 시점에 관한 사영 평면으로 생각하고 사용자에 의해 입력된 선과 점의 정보를 이용하여 사영된 3차원 물체의 2차원 모양을 모델링한다. 그리고 모델링된 물체는 3차원 운동을 하기 위한 지역 좌표계로서 소실점을 이용한다.

• Applied Science and Convergence Technology
• /
• 제23권4호
• /
• pp.169-178
• /
• 2014

Fluid model based numerical analysis is done to simulate a low damage etch back system for 20 nm scale semiconductor fabrication. Etch back should be done conformally with very high material selectivity. One possible mechanism is three steps: reactive radical generation, adsorption and thermal desorption. In this study, plasma generation and transport steps are analyzed by a commercial plasma modeling software package, CFD-ACE+. Ar + $CF_4$ ICP was used as a model and the effect of reactive gas inlet position was investigated in 2D and 3D. At 200~300 mTorr of gas pressure, separated gas inlet scheme is analyzed to work well and generated higher density of F and $F_2$ radicals in the lower chamber region while suppressing ions reach to the wafer by a double layer conducting barrier.

• Computers and Concrete
• /
• 제33권5호
• /
• pp.595-603
• /
• 2024

In the construction industry, there has been a surge in the implementation of high-tech equipment in recent years. Various technologies are being considered as potential solutions for future construction projects. Building information modeling (BIM), which utilizes advanced equipment, is a promising solution among these technologies. The need for safety inspection has also increased with the aging structures. Nevertheless, traditional safety inspection technology falls short of meeting this demand as it heavily relies on the subjective opinions of workers. This inadequacy highlights the need for advancements in existing maintenance technology. Research on building safety inspection using 3D laser scanners has notably increased. Laser scanners that use light detection and ranging (LiDAR) can quickly and accurately acquire producing information, which can be realized through reverse engineering by modeling point cloud data. This study introduces an innovative evaluation system for building safety using a 3D laser scanner. The system was used to assess the safety of an existing three-story building by implementing a reverse engineering technique. The 3D digital data are obtained from the scanner to detect defects and deflections in and outside the building and to create an as-built BIM. Subsequently, the as-built structural model of the building was generated using the reverse engineering approach and used for structural analysis. The acquired information, including deformations and dimensions, is compared with the expected values to evaluate the effectiveness of the proposed technique.

• 한국CDE학회논문집
• /
• 제6권1호
• /
• pp.1-8
• /
• 2001

We developed an on-line lathe simulator which can be used for a CAM education on the internet. Previously, VRML or static images such as JPG have been commonly used to achieve the same goal. With the 3D tool like VRML, it was possible to describe the movement of 3D object effectively. However, G-code based modeling and real-time visualization for the cutting process including parts being machined could not be accomplished. By using the simulator, we can machine a part with G-code input from a user or modeler, and parts being machined can be visualized in 2D as well as 3D. The developed system is based on EMCO lathe from Eshed and can be used through a web browser.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1994년도 춘계공동학술대회논문집; 창원대학교; 08월 09일 Apr. 1994
• /
• pp.187-196
• /
• 1994

This study deals with roughing planning by cross sectional information generated from sculptured surfaces. Bicubic Bezier surface is adopted as sculptured surfaces in this paper. The system consists of 3 pstyd : 1) modeling sculptured surface, 2) reconstruction of cross-section in 2D coordinates, 3) determination of roughing tool path with structural data. The system is developed by using BIM-PC in the environment of Auto CAD R11, AutoLISP and MetaWare C. The proposed system shows an efficient algorithm for roughing planning with cross sectional information.