• Journal of Yeungnam Medical Science
• /
• v.12 no.2
• /
• pp.210-225
• /
• 1995

The expression of $p62^{c-myc}$ and $p21^{ras}$ can be seen in many solid tumor, but the pattern and incidence of expression were different according to organ, countries, and examiners, thus it is not definitely defined. Total 67 colorectal carcinoma in paraffin sections are analysed by immunohistochemically for evaluation of the $p62^{c-myc}$ and $p21^{ras}$ expression according to the age, sex, chief complaints, location, differentiation, modified Dukes stage, using the specific monoclonal antibodies. The results were summarized as follows : The age of patients ranged from 32 years to 82 years. The mean age was 57.6 years. The expression of $p62^{c-myc}$ and $p21^{ras}$ was not correlated with age. Male was 29 cases(43.3%) and female was 38 cases(56.7%). The male to female ratio was 1:1.31. The expression of $p21^{ras}$ was increased in female(p<0.05). Abdominal pain(43.7%) was the most frequent chief complaint. The most frequent tumor location was rectum(44.8%). The expression of $p62^{c-myc}$ was increased in the rectum(p<0.05). The 65 cases(97.0%) out of 67 cases showed positive reaction of $p62^{c-myc}$ in the nucleus, cytoplasmic membrane, and cytoplasm. The 62 cases(92.5%) out of 67 cases showed positive reaction of $p21^{ras}$ in the cytoplasmic membrane and cytoplasm. The positive rate of $p62^{c-myc}$ and $p21^{ras}$ was 97.0% and 91.4% in well differentiated adenocarcinoma, 100.0% and 95.0% in moderately differentiated adenocarcinoma, 90.0% and 90.0% in poorly differentiated adenocarcinoma, 100.0% and 100.0% in mucinous carcinoma. The positive rate of $p62^{c-myc}$ and $p21^{ras}$ was 94.1% and 88.2% in Dukes stage $B_1$, 96.0% and 96.0% in Dukes stage $B_2$, 100.0% and 100.0% in Dukes stage $C_1$, 100.0% and 88.9% in Dukes stage $C_2$, and 100.0% and 100.0% in Dukes stage D. The expression of $p62^{c-myc}$ in metastatic colorectal carcinoma showed diffuse and strongly positive reaction than primary colorectal carcinoma. The expression of $p21^{ras}$ in primary colorectal carcinoma showed diffuse and strongly positive reaction than metastatic colorectal carcinoma.

• Journal of Korean Society of Forest Science
• /
• v.17 no.1
• /
• pp.35-42
• /
• 1973

Deciduous trees grown naturally in the forest of Korea usually have an irregular Lee-form and their utility has been decreased. In Korea, most of the deciduous stands are distributed in the hinterland. A shortage of the total growing stock made utilization of them necessary in this country even though some difficulties to be cutted and transported are accompanied. Therefore, this study was conducted to select the suitable sampling method for surveying them. The results investigated are as follows. 1. Three locations being 10 hectares in each location for the plots were chosen and surveyed with six $20m{\times}50m$ rectangular sample plots by four types of sampling method below. And the result is shown in Table 1. A. Random sampling by grids B. Random sampling by co-ordinates C. Systematic line plot. D. Sub-sampling 2. One hundred and fifty hectares from all plots were sectioned through the application of aerial photography scaled of 1 : 15,000. The author divided forest types according to diameter class and crown density with mirror stereoscope. The forest types were divided into three classes. Seven sample plots from the area of 150 hectars are systematically arranged and the results investigated on the circular sample point of 0.1 hectare are shown in Table 4. 3. There were no significant differences between results by sampling method and by diameter measurement method (population mean) as shown in Table 3. 4. Random sampling by grid and systematic line plot are better than others. 5. There are more over-estimated values when the circular sample point is used than where the rectangular sample point. 6. As forest stands are irregular, smaller number of sample points will make many errors.

• Journal of Gastric Cancer
• /
• v.9 no.4
• /
• pp.246-255
• /
• 2009

Purpose: The objectives of this study were to investigate the impact of the number of resected lymph nodes on the survival of gastric cancer patients who underwent curative resection, and to evaluate the cut-off values that can have an influence on survival on the tumor stage-stratified analysis. Materials and Methods: The subjects were 949 gastric cancer patients who underwent curative resection at Korea University Medical Center from 1992 to 2002. They were classified according to the depth of tumor invasion, and the influence of the number of resected lymph nodes on survival was investigated. The cut-off value for the number of resected lymph nodes was determined as the smallest value that showed a significant survival difference. Results: The tumor size, location, lymph node stage, the number of metastatic lymph nodes and the number of resected lymph nodes were significantly different according to the tumor stage. The average number of resected lymph nodes was about 39, and it showed linear correlation with the number of metastatic lymph nodes. On the Cox proportional hazard model, the cut-off values of the number of resected lymph nodes, as corrected by the number of metastatic lymph nodes, was 14 for all the patients, 15 for the pT1 patients, 28 for the pT2 patients and 37 for the pT3 patients, respectively. Conclusion: Retrieving a number of lymph nodes that is more than the cut-off value could improve the survival of gastric cancer patients. Surgeons should also make efforts to perform an exact and thorough D2 lymph node dissection. Therefore, we urge surgeons to perform D2 dissection and pathologists should examine an certain exact number of lymph nodes.

• KIPS Transactions on Software and Data Engineering
• /
• v.10 no.7
• /
• pp.271-278
• /
• 2021

As the current cyber attacks become more intelligent, the existing Intrusion Detection System is difficult for detecting intelligent attacks that deviate from the existing stored patterns. In an attempt to solve this, a model of a deep learning-based intrusion detection system that analyzes the pattern of intelligent attacks through data learning has emerged. Intrusion detection systems are divided into host-based and network-based depending on the installation location. Unlike network-based intrusion detection systems, host-based intrusion detection systems have the disadvantage of having to observe the inside and outside of the system as a whole. However, it has the advantage of being able to detect intrusions that cannot be detected by a network-based intrusion detection system. Therefore, in this study, we conducted a study on a host-based intrusion detection system. In order to evaluate and improve the performance of the host-based intrusion detection system model, we used the host-based Leipzig Intrusion Detection-Data Set (LID-DS) published in 2018. In the performance evaluation of the model using that data set, in order to confirm the similarity of each data and reconstructed to identify whether it is normal data or abnormal data, 1D vector data is converted to 3D image data. Also, the deep learning model has the drawback of having to re-learn every time a new cyber attack method is seen. In other words, it is not efficient because it takes a long time to learn a large amount of data. To solve this problem, this paper proposes the Siamese Convolutional Neural Network (Siamese-CNN) to use the Few-Shot Learning method that shows excellent performance by learning the little amount of data. Siamese-CNN determines whether the attacks are of the same type by the similarity score of each sample of cyber attacks converted into images. The accuracy was calculated using Few-Shot Learning technique, and the performance of Vanilla Convolutional Neural Network (Vanilla-CNN) and Siamese-CNN was compared to confirm the performance of Siamese-CNN. As a result of measuring Accuracy, Precision, Recall and F1-Score index, it was confirmed that the recall of the Siamese-CNN model proposed in this study was increased by about 6% from the Vanilla-CNN model.

• Journal of Korean Society of Forest Science
• /
• v.40 no.1
• /
• pp.1-18
• /
• 1978

Three Pinus densiflora populations as shown in location map (Fig. 1) were studied in 1977. These succeed the population numbers 10, 11 and 12 after the preceeding populations. Following the previous study methods, 20 trees were chosen from each population and the morphological characteristics such as tree forms, branching habit, needle and wood properties were investigated. The results are summerized as follows; 1. The mean stand ages were ranged from 40 to 45. The growth performances of trees of population 10 and 11 was similar, but 12 seemed to be inferior more or less. 2. The ratios of clear bole length was 0.53 in population 12 as the highest but 0.43 for population 10 as the lowest. 3. The population 12 was considered to be a stand of the coarser branching habit having the crown index (The maximum crown diameter/the crown length) 1.65 though the mean branching angle indicates almost horizontal. 4. The differences were observed in the clear bole length ratios and crown-indices between populations as shown in Fig. 3 and 4. 5. No inter-population differences in serration density of needle was shown but significant inter and intra-population and individual differences (within population) in number of stomata rows and resin duct. 6. Population 12 shown 0.119 of resin duct index as the maximum. 7. The pattern of diameter growth, analyses based on the width of 10-year-ring segment unit (for example, the 1st segment denotes the width between pith center and 10th year ring and the 2nd one is from 11th to 20th year ring and so on.), was alike among populations as shown in Fig. 9. 8. No significant differences between population in mean summer wood percentages as well as in wood specific gravity was observed. The values of wood specific gravity were increased with the increase of ages in population 10 and 11 however vice versa in population 12. 9. The fiber length was increased with the increase of age but no differences between populations as shown in Fig. 12.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.39 no.1
• /
• pp.15-26
• /
• 1994

To understand the relative contribution of varietal and environmental variation on various grain quality components in rice, grain appearance, milling recovery, several physicochemical properties of rice grain and texture or palatability of cooked rice for milled rice materials of seven cultivars(five japonica & two Tongil-type), produced at six locations of the middle and southern plain area of Korea in 1989, were evaluated and analyzed the obtained data. Highly significant varietal variations were detected in all grain quality components of the rice materials and marked locational variations with about 14-54% portion of total variation were recognized in grain appearance, milling recovery, alkali digestibility, protein content, K /Mg ratio, gelatinization temperature, breakdown and setback viscosities. Variations of variety x location interaction were especially large in overall palatability score of cooked rice and consistency or set- back viscosities of amylograph. Tongil-type cultivars showed poor marketing quality, lower milling recovery, slightly lower alkali digestibility and amylose content, a little higher protein content and K /Mg ratio, relatively higher peak, breakdown and consistency viscosities, significantly lower setback viscosity, and more undesirable palatability of cooked rice compared with japonica rices. The japonica rice varieties possessing good palatability of cooked rice were slightly low in protein content and a little high in K /Mg ratio and stickiness /hardness ratio of cooked rice. Rice 1000-kernel weight was significantly heavier in rice materials produced in Iri lowland compared with other locations. Milling recovery from rough to brown rice and ripening quality were lowest in Milyang late-planted rice while highest in Iri lowland and Gyehwa reclaimed-land rice. Amylose content of milled rice was about 1% lower in Gyehwa rice compared with other locations. Protein content of polished rice was about 1% lower in rice materials of middle plain area than those of southern plain regions. K/Mg ratio of milled rice was lowest in Iri rice while highest in Milyang rice. Alkali digestibility was highest in Milyang rice while lowest in Honam plain rice, but the temperature of gelatinization initiation of rice flour in amylograph was lowest in Suwon and Iri rices while highest in Milyang rice. Breakdown viscosity was lowest in Milyang rice and next lower in Ichon lowland rice while highest in Gyehwa and Iri rices, and setback viscosity was the contrary tendency. The stickiness/hardness ratio of cooked rice was slightly lower in southern-plain rices than in middle-plain ones, and the palatability of cooked rice was best in Namyang reclaimed-land rice and next better with the order of Suwon$\geq$Iri$\geq$Ichon$\geq$Gyehwa$\geq$Milyang rices. The rice materials can be classified genotypically into two ecotypes of japonica and Tongil-type rice groups, and environmentally into three regions of Milyang, middle and Honam lowland by the distribution on the plane of 1st and 2nd principal components contracted from eleven grain quality properties closely associated with palatability of cooked rice by principal component analysis.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.34 no.2
• /
• pp.166-179
• /
• 2008

Excessive concentration of stress which is occurred in occlusion around the implant in case of the implant supported fixed partial denture has been known to be the main cause of the crestal bone destruction. Therefore, it is essential to evaluate the stress analysis on supporting tissue to get higher success rates of implant. The purpose of this study was to evaluate the effects of stress distribution and deformation in 3 different types of three-unit fixed partial denture sup-ported by two implants, using a three dimensional finite element analysis in a three dimensional model of a whole mandible. A mechanical model of an edentulous mandible was generated from 3D scan, assuming two implants were placed in the left premolars area. According to the position of pontic, the experiments groups were divided into three types. Type I had a pontic in the middle position between two implants, type II in the anterior posi-tion, and type III in the posterior position. A 100-N axial load was applied to sites such as the central fossa of anterior and posterior implant abutment, central fossa of pontic, the connector of pontic or the connector between two implants, the mandibular boundary conditions were modeled considering the real geometry of its four-masticatory muscular supporting system. The results obtained from this study were as follows; 1. The mandible deformed in a way that the condyles converged medially in all types under muscular actions. In comparison with types, the deformations in the type II and type III were greater by 2-2.5 times than in the type I regardless of the loading location. 2. The values of von Mises stresses in cortical and cancellous bone were relatively stable in all types, but slightly increased as the loading position was changed more posteriorly. 3. In comparison with type I, the values of von Mises stress in the implant increased by 73% in Type II and by 77% in Type III when the load was applied anterior and posterior respectively, but when the load was applied to the middle, the values were similar in all types. 4. When the load was applied to the centric fossa of pontic, the values of von Mises stress were nearly $30{\sim}35%$ higher in the type III than type I or II in the cortical and cancellous bone. Also, in the implant, the values of von Mises stress of the type II or III were $160{\sim}170%$ higher than in the type I. 5. When the load was applied to the centric fossa of implant abutment, the values of von Mises stress in the cortical and cancellous bone were relatively $20{\sim}25%$ higher in the type III than in the other types, but in the implant they were 40-45% higher in the type I or II than in the type III. According to the results of this study, musculature modeling is important to the finite element analysis for stress distribution and deformation as the muscular action causes stress concentration. And the type I model is the most stable from a view of biomechanics. Type II is also a clinically accept-able design when the implant is stiff sufficiently and mandibular deformation is considered. Considering the high values of von Mises stress in the cortical bone, type III is not thought as an useful design.

• Journal of Korean Society of Forest Science
• /
• v.44 no.1
• /
• pp.1-25
• /
• 1979

Six natural populations of Pinus densiflora S. et Z. as shown in the location map (Flg 1) were studied during 1978. The numerial pouplation codes, 13 to 18. The results of populations 1 to 12 were reported in previous papers. Following the study methods described before, 20 trees were sampled from each population and morpological characteristics such as stem forms, branching habit needle and wood properties investigated. The results are summerized as follows; 1. The mean stand ages were ranged from 36 to 97 of years. The growth performances of trees of population 14. 15 and 18 was similar, but 13, 16, and 17 seemed to be inferior more or less. 2. The ratios of clear bole length were 0.70 in population 18 as the highest but 0.28 for population 16 as the lowest. 3. The population 17 was considered to be a stand of the coarser branching habit having the crown index (The maximum crown diameter/the crown height) 158 though the branching angles were almost horizontal. 4. The differences were observed in the clear bole length ratios and crown-indices between population as shown In Fig. 3 and 4. 5. As to the serration density, number of stomata row and resin duct; the significant differences exist between individual trees within population and also between populations. 6. Population 18 shown resin duct index 0.119 as the maximum. 7. The patterns of diameter growth, based on the width of 10-year-ring segment unit(for example, the 1st segment denotes the with between pith center and 10th year ring and the 2nd one is from 11th to 20th ring and so on.), were alike among populations as shown in Fig 9. 8. Significant differences between population in mean summer wood percentage as well as in wood specific gravity was observed. The values of wood specific gravity were increased with the increase of ages in population 14, 18 however vice versa in population 13, 15, and 17. 9. The fiber length was mereased with the increased of age but no differences between populations as shown in Fig. 12.

• Korean Journal of Remote Sensing
• /
• v.34 no.6_4
• /
• pp.1479-1488
• /
• 2018

On September 3rd 2017, strong artificial seismic signals from North Korea were detected in KMA (Korea Meteorological Administration) seismic network. The location of the epicenter was estimated to be Punggye-ri nuclear test site and it was the most powerful to date. The event was not studied well due to accessibility and geodetic measurements. Therefore, we used remote sensing data to analyze surface changes around Mt. Mantap area. First of all, we tried to detect surface deformation using InSAR method with Advanced Land Observation Satellite-2 (ALOS-2). Even though ALOS-2 data used L-band long wavelength, it was not working well for this particular case because of decorrelation on interferogram. The main reason would be large deformation near the Mt. Mantap area. To overcome this limitation of decorrelation, we applied offset tracking method to measure deformation. However, this method is affected by window kernel size. So we applied various window sizes from 32 to 224 in 16 steps. We could retrieve 2D surface deformation of about 3 m in maximum in the west side of Mt. Mantap. Second, we used Pleiadas-A/B high resolution satellite optical images which were acquired before and after the 6th nuclear test. We detected widespread surface damage around the top of Mt. Mantap such as landslide and suspected collapse area. This phenomenon may be caused by a very strong underground nuclear explosion test. High-resolution satellite images could be used to analyze non-accessible area.

• Progress in Medical Physics
• /
• v.23 no.4
• /
• pp.309-316
• /
• 2012

Multimodal-imaging technique has been rapidly developed for improvement of diagnosis and evaluation of therapeutic effects. In despite of integrated hardware, registration accuracy was decreased due to a discrepancy between multimodal image and insufficiency of count in accordance with different acquisition method of each modality. The purpose of this study was to improve the PET image by event data resampling through analysis of data format, noise and statistical properties of small animal PET list data. Inveon PET listmode data was acquired as static data for 10 min after 60 min of 37 MBq/0.1 ml $^{18}F$-FDG injection via tail vein. Listmode data format was consist of packet containing 48 bit in which divided 8 bit header and 40 bit payload space. Realigned sinogram was generated from resampled event data of original listmode by using adjustment of LOR location, simple event magnification and nonparametric bootstrap. Sinogram was reconstructed for imaging using OSEM 2D algorithm with 16 subset and 4 iterations. Prompt coincidence was 13,940,707 count measured from PET data header and 13,936,687 count measured from analysis of list-event data. In simple event magnification of PET data, maximum was improved from 1.336 to 1.743, but noise was also increased. Resampling efficiency of PET data was assessed from de-noised and improved image by shift operation of payload value of sequential packet. Bootstrap resampling technique provides the PET image which noise and statistical properties was improved. List-event data resampling method would be aid to improve registration accuracy and early diagnosis efficiency.