• Journal of Environmental Science International
• /
• v.15 no.2
• /
• pp.121-131
• /
• 2006

Atmospheric bulk (wet and dry) samples were monthly collected in Masan and Heangam areas of Korea, to assess the deposition flux and seasonal variation of polycyclic aromatic hydrocarbons (PAHs). Deposition fluxes of PAHs in bulk samples were determined using gas chromatography coupled to mass spectrometer detector (GC/MSD). Particle deposition fluxes from Masan and Haengam areas varied from 13 to $87\;g/m^2/year$ and from 5 to $52\;g/m^2/year$, respectively. PAHs deposition fluxes in atmospheric bulk samples in Masan and Haengam areas ranged from 135 to $464\;{\mu}g/m^2/year$ and from 62.2 to $194\;{\mu}g/m^2/year$, respectively. Atmospheric deposition fluxes of particles and PAHs in this study were comparable to or slightly lower values than those from different locations in Korea and other countries. PAHs profiles of atmospheric deposition bulk samples showed slightly different from two sampling areas, however the predominant species of PAHs were similar. Indeno (1,2,3-c,d)pyrene, benzo(g,h,i)perylene, phenanthrene compounds were the most detected PAHs in deposition bulk samples. Carcinogenic PAHs occupied the contribution of approximately $30-40\%$ of the total PAHs deposition fluxes. The non-metric multi-dimensional scaling (MDS) was used, to assess the differentiation of PAHs source between two sampling areas. The result suggests that PAHs contamination sources were different according to the location and season surveyed. There was no an apparent relationship between the PAHs deposition flux against temperature and rainfall amount, even though summer season with the highest temperature and the largest amount of precipitation showed the lowest PAHs deposition flux. Benzo(e)pyrene/benzo(a)pyrene ratio indicated that the photo-degradation process was one of important factors to the seasonal variation of PAHs with the lower deposition fluxes.

• Ecology and Resilient Infrastructure
• /
• v.4 no.2
• /
• pp.83-92
• /
• 2017

Increased investment in environment-friendly transport vehicles has led to rapid transit of railway tracks, double track program, linear improvements in railway lines, and moving railroad routes into the suburbs. They resulted in fast increase of railway yards. However, as the railroad yards being neglected, urban fine sites have been degraded. Local governments kept seeking ways to utilize the railway yards. In addition, Ministry of land, infrastructure and transport enacted "Guidelines for utilization of railway yards". The Guidelines categorized the railway yards into three types; conservation, utilized, and other sites in order to make efficient use of them. The railway yards have been converted and used for parks, rail bike trails, bike paths, and solar projects. It seems that studies are needed on diverse use of the yards and on post evaluation. This study investigated current uses of railway yards, domestic and foreign, and analyzed for the pertinent conditions on natural and cultural landscape, educational value, location and accessibility, potential for recreational area, and development opportunities. In this study, I proposed a quantitative evaluation method, and to find way to diversify the use of railway yards.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.182-185
• /
• 2005

Satellite cameras are calibrated before launch in detail and in general, but it cannot be guaranteed that the geometry is not changing during launch and caused by thermal influence of the sun in the orbit. Modem satellite imaging systems are based on CCD-line sensors. Because of the required high sampling rate the length of used CCD-lines is limited. For reaching a sufficient swath width, some CCD-lines are combined to a longer virtual CCD-line. The images generated by the individual CCD-lines do overlap slightly and so they can be shifted in x- and y-direction in relation to a chosen reference image just based on tie points. For the alignment and difference in scale, control points are required. The resulting virtual image has only negligible errors in areas with very large difference in height caused by the difference in the location of the projection centers. Color images can be related to the joint panchromatic scenes just based on tie points. Pan-sharpened images may show only small color shifts in very mountainous areas and for moving objects. The direct sensor orientation has to be calibrated based on control points. Discrepancies in horizontal shift can only be separated from attitude discrepancies with a good three-dimensional control point distribution. For such a calibration a program based on geometric reconstruction of the sensor orientation is required. The approximations by 3D-affine transformation or direct linear transformation (DL n cannot be used. These methods do have also disadvantages for standard sensor orientation. The image orientation by geometric reconstruction can be improved by self calibration with additional parameters for the analysis and compensation of remaining systematic effects for example caused by a not linear CCD-line. The determined sensor geometry can be used for the generation? of rational polynomial coefficients, describing the sensor geometry by relations of polynomials of the ground coordinates X, Y and Z.

• Journal of Korea Multimedia Society
• /
• v.12 no.5
• /
• pp.699-707
• /
• 2009

Recently, while 3D sports game increases, the research that it recognizes the operation of the real user actively progresses. Most of all, the research about the golf is active. In this paper, the camera acquiring in a high-speed multi-exposure image measures the flight data of the golf ball through the image processing. While photographing, the high-speed camera, using this system, exposes an image at regular intervals. And line scan camera checks whether the golf ball passed or not. After the location information of the calculated golf ball calculates a speed and a direction by using the physical formula, it applies the golf simulation. After, this system is possible the measurement of the physical element of the spherical object.

• Journal of the Korean Institute of Rural Architecture
• /
• v.17 no.4
• /
• pp.49-56
• /
• 2015

This study aims to identify variables (dependent and independent variables) by plane type and area, focusing on the R.C structure planes which were applied to the National Rental Housing Complexes during the 1970-80s; and to investigate differences in residential space compositions depending on the interrelationship between the variables. The results of this study can be summarized as follows: First, an independent variable which had the most influence on the residential space composition was found to be stairs. As dependent variables, bedroom, livingroom, and kitchen showed difference in spatial arrangements. Second, in the case of the front entry type, one-sided arrangements were the most common for the 3L+D.K composition, because livingroom was arranged near the stairs, Disadvantages were: (1) the spatial division of each room was not efficient; and (2) the use of room space was low due to long access to each room. Third, in the case of the rear entry type, no problem was found in arranging bedrooms on the front side. By arranging livingroom as a common space area, the distance of approachability to each room was found to be short and the use of space was excellent. However, disadvantages were: (1) stability was lacking; and (2) privacy was low. Fourth, depending on the location of the stairs, an interaction between bedrooms and the connectivity between livingroom and kitchen were found. Accordingly, there were differences in the size and arrangement of space by plane type.

• Archives of design research
• /
• v.14 no.4
• /
• pp.189-198
• /
• 2001

This study was to identify HCl design factors for increasing information processing and attention for mentally retarded children. Several factors such as size, location, moving distance were varied for three experiments operated by the amount of information. The results showed that the larger size of target, the greater moving distance of target, and the less amount of information increased mentally retarded children's sensitivity. Also, when the target was displayed at upper left of computer screen, sensitivity of mentally retarded children was high, compared other locations of screen.

• Asian-Australasian Journal of Animal Sciences
• /
• v.12 no.8
• /
• pp.1200-1204
• /
• 1999

Two experiments were conducted to study the effect of urea treatment of rice and wheat straw on feed intake, dry matter (DM) digestibility and milk yield of lactation buffaloes in their late lactation under farmers' management conditions in the western hills of Nepal during 1995 and 1997. Dry matter intake (DMI) from urea treated rice and wheat straw was not improved significantly (p<0.05) nor the total DMI of the lactating buffaloes was improved significantly. However, feeding urea treated rice straw increased straw DMI by 14.2% and total DMI by 10.63% units over the untreated rice straw. Similarly, the increase in straw and total DMI were 20.18 and 17.40% units over the untreated wheat straw fed animals. Although there was no significant effect of urea treatment of both straw on DM digestibility, it was higher for treated than untreated straw at all locations. An overall increment of 18.1% units for rice straw and 13.3% units for wheat straw was observed. There was a significant effect (p<0.01) of feeding urea treated rice and wheat straw on the milk yield of lactating buffaloes during late lactation under farmers conditions. Post experiment milk yield was also significantly (p<0.05) higher for the animals fed treated straw in both the experiments. Buffalo milk yield was also significantly affected by breed (p<0.01), location (p<0.01) and parity (p<0.01) of the animals. General response of the farmers about the technology and their observed effect on animal performance was also very positive.

• Journal of the Korea Computer Graphics Society
• /
• v.7 no.2
• /
• pp.11-19
• /
• 2001

This paper proposes a colored paper mosaic rendering technique based on image segmentation that can automatically generate torn and tagged colored paper mosaic effect. and 3D effect that come about in human-made mosaic work can be represented by generating shadow using difference of paper thickness. Previous method did not produce satisfactory results due to the ineffectiveness of having to use pieces of the same size. The proposed two methods for determination of paper shape and location that are based on segmentation can subdivide image area by considering characteristics of image. The first method is to generate Voronoi polygon after subdividing the segmented image again using quad tree. And the second method is to apply the Voronoi diagram on each segmentation layer. Through these methods, the characteristic of the image is expressed in more detail than previous colored paper mosaic rendering method and these methods enable to produce image that is closer to human-made mosaic work.

• Spatial Information Research
• /
• v.16 no.4
• /
• pp.441-453
• /
• 2008

With the rapid progress of location based services, GIS, and ubiquitous computing technologies, the space that we are dealing with is no longer limited to outdoor space but being extended to indoor space. Indoor space has some differences from outdoor space, therefore to provide integrated spaces and seamless services, it is required to establish new theories, data models, and systems. For this reason, ambitious project has been launched last year to establish a theoretical background, develop a core technologies and systems, and provide services of indoor spatial awareness. In this paper, we present an overall sketch on the project and major research topics. First, we present the ISA (indoor spatial awareness) project with its goal and research topics. Second, a simplified 3D spatial model, called prism model, is proposed as a basic data types and operators of indoor spatial DBMS. Third, a indoor feature data model, developed T. Kolbe et al. who is a member of this project team, is introduced in this paper. This model provides a basis for the integration of different spaces.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.24 no.5
• /
• pp.553-560
• /
• 2015

Fracture mechanics analysis for cracked pipes is essential for applying the leak-before-break (LBB) concept to nuclear piping design. For LBB assessment, crack instability and leak rate should be predicted accurately for through-wall cracked pipes. In a nuclear piping system, elbows are connected with straight pipes by circumferential welding; this weld region is often considered a critical location. Hence, accurate crack assessment is necessary for cracks in the interface between elbows and straight pipes. In this study, the stress intensity factor (SIF) and elastic crack opening displacement (COD) were estimated through detailed 3D elastic finite element (FE) analyses. Based on the results, closed-form solutions of shape factors for calculating the SIFs and elastic CODs were proposed for circumferential through-wall cracks in the abovementioned interfaces under internal pressure. In addition, the effect of the elbow on shape factors was investigated by comparing the results with the existing solutions for a straight pipe.