• 한국지능시스템학회논문지
• /
• 제23권4호
• /
• pp.286-291
• /
• 2013

대시야 백색광간섭계(WSI ; White Light Scanning Interferometer)를 이용하여, Flip Chip Bump 검사 공정에 적용하는 것을 목적으로 한 인라인 형태의 플립칩 범프 3차원 검사 장치를 개발한다. 여러 서브스트레이트에 있는 플립칩 범프 높이 측정 결과와 이에 의한 동일한 여러 범프에 대한 반복성 측정 실험 결과를 제시한다. 테스트 벤치에서의 실험 결과와 개발된 플립칩 범프 3차원 검사 장치에서의 실험 결과를 비교하였으며 진동의 영향이 감소되어 개선된 반복성 실험 결과를 얻을 수 있었다. 플립칩 범프 3차원 검사 장치의 검사성능을 평가할 수 있는 기준을 제시한다.

• 한국지능시스템학회논문지
• /
• 제22권6호
• /
• pp.694-699
• /
• 2012

반도체 검사 공정에 적용하기 위한 대시야 백색광간섭계(WSI ; White Light Scanning Interferometer)를 사용한 반도체 검사 결과를 본 논문에서 제시한다. 각 서브스트레이트에 있는 동일한 여러 범프에 대한 3D 데이터 반복성 측정 실험 결과를 제시한다. 각 서브스트레이트의 모든 범프에 대한 3D 데이터 반복성 측정 실험 결과를 제시한다. 반도체 검사 공정에서 3D 데이터 검사를 고속으로 달성하기 위해 대시야 백색광간섭계를 사용한 반도체 검사는 매우 중요한 의미를 갖는다. 인라인 고속 3D 데이터 검사기 개발에 본 논문이 크게 기여할 수 있다.

• 한국산학기술학회논문지
• /
• 제15권10호
• /
• pp.5906-5911
• /
• 2014

요즈음 생산되는 반도체의 제품이 제대로 작동하는지, 낮은 습도 또는 높은 온도에서 잘 견디는가를 검사하는 패키지 조립 및 검사 공정이 현장에 많이 있다. 또한 검사공정에서 사용되고 있는 반도체 테스트 핸들러 픽커 검사장비가 있는데, 본 연구에서는 CATIA 프로그램을 이용하여 3D 모델링하였으며, ANSYS 프로그램을 이용하여 반도체 테스트 핸들러 픽커 검사장비 프레임의 모델에 대하여 3가지 피로하중에 대한 해석을 하였다. 해석 결과로서 Case 1과 Case 2 모두 프레임의 가운데에서 최대 변형량이 발생하고 불규칙 피로 하중들 중에서 가장 하중의 변동이 심한 'SAE bracket history'가 가장 불안정하고 'Sample history'가 가장 안정함을 보이고 있다. 본 연구의 피로 해석 결과는 반도체 테스트 핸들러 픽커 검사장비 프레임의 파손방지 및 내구성을 검토함으로서 그 프레임의 설계에 효율적으로 활용이 될 수 있다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 춘계학술대회 논문집
• /
• pp.61-62
• /
• 2007

• 한국압력기기공학회 논문집
• /
• 제6권1호
• /
• pp.72-77
• /
• 2010

During the period of reinforcement work for the licensing renewal of CANDU NPP, the fuel channels, Calandria tubes and feeders of CANDU Reactor are replaced. The remote visual inspection of Calandria internal is also performed during the period of reinforcement work. This period is a unique opportunity to inspect the inside of the Calandria. The visual inspection for the Calandria vessel and its internals of Wolsong NPP Unit 1 was performed by Nuclear Engineering & Technology Institute(NETEC) of KHNP. To perform this inspection, NETEC developed equipment applied new technology such as the synchronization of 3D CAD, automatic alignment and control system. The inspection confirmed that the Calandria integrity of Wolsong NPP Unit 1 is perfect.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.507-510
• /
• 1999

Inspection of BGAs presents several challenges for modem measurement equipment. No only must these systems be fast and accurate, they must deal with the special challenges presented by very small shiny metal spheres. For accurate measurement, we propose an algorithm which fits for estimating the accurate ball height using 2-D curve-fitting algorithm. The real boundary between two adjacent pixels and the real ball diameter are measured with subpixel accuracy Experimental results show that the proposed method calculates the ball height and diameter with subpixel accuracy and is robust in local noise with low measurement error.

• 반도체디스플레이기술학회지
• /
• 제17권1호
• /
• pp.27-34
• /
• 2018

Industrially, die-casting products are formed through casting, and so the methods to inspect the defects inside them are very restrictive. External inspection methods including visual inspection, sampling judgment, etc. enables researchers to inspect possible external defects, but x-ray inspection equipment has been generally used to inspect internal ones. Recently, they have been also applying three-dimensional internal inspections using CT equipment. However, they have their own limitations in applying to the use of industrial inspection due to limited detection size and long calculation time. To overcome the above problems, this paper has suggested a method to inspect internal defects by comparing the CAD data of the product to be inspected with the 3D data of the CT image. In this paper, we proposed a method for fast and accurate inspection in three dimensions by applying x-ray inspection to find internal defects in industrial parts such as aluminum die casting products. To show the effectiveness of the proposed method, a series of experiments have been carried out.

• 한국군사과학기술학회지
• /
• 제20권3호
• /
• pp.352-361
• /
• 2017

This paper proposes a design and fabrication of the test equipment that is implemented as a part of the airborne tracking radar inspection under the environment of indoor simulation. This test equipment provides controlling the operation status of airborne tracking radar and replicating the velocity and range information of target by generating a variety of target signal. This is mainly composed of radar operation controller, target signal generator, horn antenna driving devices. Radar operation controller is able to perform the controlling of radar operation mode and monitoring in real time by serial communication. Target signal generator is generated doppler signal and range delayed signal using virtual target of RF-band. Horn antenna driving devices perform a role of target simulating exercise. In the end, the performance is demonstrated using experiment results of test equipment for airborne tracking radar.

• 한국공간구조학회논문집
• /
• 제19권4호
• /
• pp.85-94
• /
• 2019

Then 3D printing is used practically at construction sites, there is a serious lack of studies on the conflict with construction-related laws and expected operational problems. Accordingly, the purpose of this study is to present obstacles and directions for improvement in construction-related laws (Building Act, Construction Technology Promotion Act, Housing Act, Construction Machinery Management Act, etc.) for practical operation of 3D printing. The important results are as follows. Amending existing construction-related laws for 3D printing is irrational and inefficient in terms of structure and material. This study proposed a method of satisfying performance required by laws or standards based on the performance design method presented in existing laws and systems through structure and material performance certification procedure. In addition, inclusion of 3D printing equipment in the Construction Machinery Management Act results in various restrictions such as equipment inspection and certification of machine parts. As such restrictions can block vitalization of 3D printing, a long-term and step-wise approach was suggested.

• International Journal of Advanced Culture Technology
• /
• 제8권2호
• /
• pp.58-67
• /
• 2020

In this paper, the maintenance training manual of EV vehicle was produced by utilizing digital twin technology and various sensors such as IR-based light house tracking and head tracker. In addition, through digital twin technology and VR to provide high immersiveness to users, sensory content creation technology was secured through animation and effect realization suitable for EV vehicle maintenance situation. EV vehicle maintenance training manual is 3D engine programming and real-time creation of 3D objects and minimization of screen obstacles and selection of specific menus in virtual space in the form of training simulation. In addition, automatic output from the Head Mount Display (HUD), EV vehicle maintenance and inspection, etc., user can easily operate content was produced. This technology development can enhance immersion to users through implementation of detailed scenarios for maintenance / inspection of EV vehicles" and 3D parts display by procedure, realization of animations and effects for maintenance situations. Through this study, familiarity with improving the quality of education and safety accidents and correct maintenance process and the experienced person was very helpful in learning how to use equipment naturally and how to maintain EV vehicles.