• Journal of Korea Water Resources Association
• /
• v.55 no.2
• /
• pp.135-145
• /
• 2022

This study aims to verify the Drone utilization and the accuracy of the global navigation satellite system (GNSS), Drone RGB (Photogrammetry) (D-RGB), and Drone LiDAR (D-LiDAR) surveying performance in the downstream reaches of the local stream. The results of the measurement of Ground Control Point (GCP) and Check Point (CP) coordinates confirmed the excellence. This study was carried out by comparing GNSS, D-RGB, and D-LiDAR with the values which the hydraulic characteristics calculated using HEC-RAS model. The accuracy of three survey methods was compared in the area of the study which is the ownership station, to 6 GCP and 3 CP were installed. The comparison results showed that the D-LiDAR survey was excellent. The 100-year frequency design flood discharge was applied in the channel sections of the small stream. As a result of D-RGB surveying 2.30 m and D-LiDAR 1.80 m in the average bed elevation, and D-RGB surveying 4.73 m and D-LiDAR 4.25 m in the average flood condition. It is recommended that the performance of D-LiDAR surveying is efficient method and useful as the surveying technique of the geospatial information using the drone equipment in stream channel.

• Journal of Korean Society for Geospatial Information Science
• /
• v.24 no.2
• /
• pp.71-78
• /
• 2016

After the 'Guidelines for the preservation of digital heritage' were published by UNESCO, interests in the fabrication of digital cultural heritage have been increasing throughout the world. The present study was intended to fabricate digital cultural heritages for existing cultural properties using the reverse engineering technology and obtain two-dimensional drawings. Jinju Castle Gongbukmun, which is a cultural property, was selected as a study subject and 3D modeling of Jinju Castle Gongbukmun was conducted by implementing 3D scanning and processing the point cloud data. Using the Gongbukmun 3D model (3D-Gongbukmun) made as such, requirements as a digital heritage were reviewed and 2D drawings of Gongbukmun such as front views, ground plans, and side views could be prepared.

• The Journal of the Korea Contents Association
• /
• v.21 no.11
• /
• pp.193-202
• /
• 2021

Barrier-free is defined as inclusive design of built environments such as building and its facilities that can be approached, entered and used by persons with disabilities. The purpose of this paper develops the content that can identify the physical barriers in the way of movement and provide information associated with barrier-free by using both Geospatial Information and Virtual Reality technology. For this, we conducted literature reviews to find the tackling barriers in terms of barrier-free access and extracted main functions to construct the content. Then, the prototype model which composed of VR engine and 3D geospatial data was implemented, and finally the utilization of the prototype was checked in accordance with barrier-free scenario. The developed prototype model of this study would be contributed to design the barrier-free of public places and access to public buildings for the mobility-disabled people.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.17 no.4
• /
• pp.28-39
• /
• 2014

Several studies have been performed globally on the construction of integrated systems that are available for the integrated use of 3D geographic information on terrain and oceans. Research on 3D geographic modeling is also facilitated by the application of Lidar surveying, which enables the highly accurate realization of 3D geographic information for a wide area of land. In addition, a few marine research organizations have been conducting investigations and surveying diverse ocean information for building and applying MGIS(Marine Geographic Information System). However, the construction of integrated geographic information systems for both terrain and oceans has certain limitations resulting from the inconsistency in reference systems and datum levels between two data. Therefore, in this investigation, integrated geospatial information has been realized by using a combined topographical map, after matching the reference systems and datum levels by integration of airborne Lidar data and multi-beam echo sounder data. To verify the accuracy of the integrated geospatial information data, ten randomly selected samples from study areas were selected and analyzed. The results show that the 10 analyzed data samples have an RMSE of 0.46m, which meets the IHO standard(0.5m) for depth accuracy of hydrographic surveys.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.2
• /
• pp.77-86
• /
• 2014

As raster-based high quality and resolution spatial information has appeared, 1/1,000 digital map lost either its recognition or uses because of insufficient new modified and updated information. Therefore, this study analyzed the linkage between three-dimensional spatial information and 1/1,000 digital map, and also suggested a modification plan of 1/1,000 digital map, made by three-dimensional spatial information. In fact, some area of Incheon and Busan were presented with the modification plan of 1/1,000 digital map as three-dimensional trial models. These trials reflected possibilities of modification by qualitative and quantitative analysis of 1/1,000 digital map, using three-dimensional object model.

• Korean Journal of Remote Sensing
• /
• v.39 no.5_4
• /
• pp.1165-1172
• /
• 2023

Recently, Korea has declared carbon neutrality by 2050. The Korea Forest Service is promoting the precision and high technology of forest resource surveys. As such, the demand for forest resource management is increasing, and the need to build a digital twin of forest space is increasing. However, to date, digital twin has only built and provided virtual city services, which are city and nationwide digital twin environments. Three-dimensional digital twin services targeting forest space are not operated and provided. Therefore, in this study, we aimed to implement a forest digital twin environment to provide 3D forest spatial information services corresponding to vertical information such as tree-level height and thorax diameter. By lightweighting realistic 3D tree models and applying 3D Tiles, we confirmed the feasibility of implementing a forest digital twin environment for 3D forest spatial information services. Through continuous research, we plan to implement a forest digital twin that can deploy and service 3D tree models for trees nationwide, including street trees in urban areas. This is expected to enable the development of forest digital twin services for forest resource management.

• Journal of Korean Society for Geospatial Information Science
• /
• v.14 no.3 s.37
• /
• pp.13-22
• /
• 2006

Realistic 3D building construction in urban area has become an important issue because of increasing demand of 3D geo-spatial information in many application. Contrary to the conventional 3D building model construction approach using aerial images and high-resolution satellite imagery, it has been researched widely in building reconstruction using high-accuracy aerial LIDAR data in the latest. This paper presents a method for 3D building construction through building outlines extraction by LoG operator's Zero-crossing and line generation and refinement by Douglas-Peucker algorithm.

• 한국지역지리학회:학술대회
• /
• 2009.08a
• /
• pp.108-115
• /
• 2009

An increase in oil and gas plants caused by development of process industry have brought into the increase in use of flammable and toxic materials in the complex process under high temperature and pressure. There is always possibility of fire and explosion of dangerous chemicals, which exist as raw materials, intermediates, and finished goods whether used or stored in the industrial plants. Since there is the need of efforts on disaster damage reduction or mitigation process, we have been conducting a research to relate explosion model on the background of real 3D terrain model. By predicting the extent of damage caused by recent disasters, we will be able to improve efficiency of recovery and, sure, to take preventive measure and emergency counterplan in response to unprepared disaster. For disaster damage prediction, it is general to conduct quantitative risk assessment, using engineering model for environmentaldescription of the target area. There are different engineering models, according to type of disaster, to be used for industry disaster such as UVCE (Unconfined Vapor Cloud Explosion), BLEVE (Boiling Liquid Evaporation Vapor Explosion), Fireball and so on, among them.we estimate explosion damage through UVCE model which is used in the event of explosion of high frequency and severe damage. When flammable gas in a tank is released to the air, firing it brings about explosion, then we can assess the effect of explosion. As 3D terrain information data is utilized to predict and estimate the extent of damage for each human and material. 3D terrain data with synthetic environment (SEDRIS) gives us more accurate damage prediction for industrial disaster and this research will show appropriate prediction results.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.39 no.5
• /
• pp.297-311
• /
• 2021

Around the world, there is an increasing interest in Digital Twin cities. Although geospatial data is critical for building a digital twin city, currently-established spatial data cannot be used directly for its implementation. Integration of geospatial data is vital in order to construct and simulate the virtual space. Existing studies for data integration have focused on data transformation. The conversion method is fundamental and convenient, but the information loss during this process remains a limitation. With this, standardization of the data model is an approach to solve the integration problem while hurdling conversion limitations. However, the standardization within indoor space data models is still insufficient compared to 3D building and city models. Therefore, in this study, we present a comparative analysis of data models commonly used in indoor space modeling as a basis for establishing a generic indoor space feature model. By comparing five models of IFC (Industry Foundation Classes), CityGML (City Geographic Markup Language), AIIM (ArcGIS Indoors Information Model), IMDF (Indoor Mapping Data Format), and OmniClass, we identify essential elements for modeling indoor space and the feature classes commonly included in the models. The proposed generic model can serve as a basis for developing further indoor feature models through specifying minimum required structure and feature classes.

• 한국방재학회:학술대회논문집
• /
• 2007.02a
• /
• pp.418-421
• /
• 2007

It is important to maintain information by application or 3D modeling through the satellite and UAV image which is a real world. The prevention business has recognized the need for accurate 3-D geospatial information around the disaster region to identify objects to 3D modeling. In this paper, we presented an approach to create 3D model and loading, processing the image using GIS techniques, and the digital topographic maps were used for the DEM and the features of the area. The result is a implementation of the simple application that illustrates the objects in 3-D. The presented approach will be used for identifying objects and assisting in regional planning around the airfields.