• Journal of Conservation Science
• /
• v.27 no.3
• /
• pp.251-260
• /
• 2011

This study focus on the suggestion of standard legend, the process system on making method of deterioration map, the development of crack index (CI), and the evaluation techniques of surface and 3D deterioration rate for stone cultural heritage. The standard legends of deterioration forms were made using a common graphic program after crack, blistering, scaling, break-out, granular disintegration, and perforation were subdivided. The deterioration map improved accuracy and reliability on deterioration range using 3D digital restoration and high resolution photograph mapping technique. Also, quantitative deterioration evaluation of stone cultural heritage was carried out developing the crack index, and the 3D deterioration rate of a break-out part was calculated by virtual restoration modeling. As a quantitative deterioration evaluation of Magoksa Temple stone pagoda based on the results described above, the north face showed high deterioration rate of bursting crack (1.70), hair crack (1.34), scaling (20.2%) and break out (13.0%), and the 3D deterioration rate of first roof stone was 6.7%.

• Ocean Systems Engineering
• /
• v.6 no.1
• /
• pp.61-97
• /
• 2016

This is the second of two papers on the 3D numerical modeling of nearshore hydro- and morphodynamics. In Part I, the focus was on surf and swash zone hydrodynamics in the cross-shore and longshore directions. Here, we consider nearshore processes with an emphasis on the effects of oceanic forcing and beach characteristics on sediment transport in the cross- and longshore directions, as well as on foreshore bathymetry changes. The Delft3D and XBeach models were used with four turbulence closures (viz., ${\kappa}-{\varepsilon}$, ${\kappa}-L$, ATM and H-LES) to solve the 3D Navier-Stokes equations for incompressible flow as well as the beach morphology. The sediment transport module simulates both bed load and suspended load transport of non-cohesive sediments. Twenty sets of numerical experiments combining nine control parameters under a range of bed characteristics and incident wave and tidal conditions were simulated. For each case, the general morphological response in shore-normal and shore-parallel directions was presented. Numerical results showed that the ${\kappa}-{\varepsilon}$ and H-LES closure models yield similar results that are in better agreement with existing morphodynamic observations than the results of the other turbulence models. The simulations showed that wave forcing drives a sediment circulation pattern that results in bar and berm formation. However, together with wave forcing, tides modulate the predicted nearshore sediment dynamics. The combination of tides and wave action has a notable effect on longshore suspended sediment transport fluxes, relative to wave action alone. The model's ability to predict sediment transport under propagation of obliquely incident wave conditions underscores its potential for understanding the evolution of beach morphology at field scale. For example, the results of the model confirmed that the wave characteristics have a considerable effect on the cumulative erosion/deposition, cross-shore distribution of longshore sediment transport and transport rate across and along the beach face. In addition, for the same type of oceanic forcing, the beach morphology exhibits different erosive characteristics depending on grain size (e.g., foreshore profile evolution is erosive or accretive on fine or coarse sand beaches, respectively). Decreasing wave height increases the proportion of onshore to offshore fluxes, almost reaching a neutral net balance. The sediment movement increases with wave height, which is the dominant factor controlling the beach face shape.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2003.11a
• /
• pp.23-26
• /
• 2003

3차원 Polygonal Mesh는 그래픽스, 에니메이션, 게임에서 3차원 객체에 대한 표현에 사용되고, 이러한 3차원 모델에 대한 IndexedFaceSet 노드에 3차원 정전정보와 연결정보를 압축하는데 MPEG-4 3DMC를 사용한다. 이러한 연결정보는 다각형의 Mesh 형태로 3차원 모델을 구성하는 정보를 갖는데, 이는 Tepological Surgery 라고 하는 방법을 통해서 2차원의 스트립 단위의 데이터로 분해된다. 이러한 3D 데이터는 방송환경과 같은 재전송이 불가능한 네트워크의 환경에서 유무선 네트워크 상에서 채널문제로 인해서 데이터의 손실이 있게 되면, 복호화 된 데이터는 데이터의 손상이 발생하게 된다. 이러한 현상은 3D 모델의 좌표의 연결정보에 손상을 주게 되고, 여기서 복호화 된 데이터는 스트립 단위로 손상이 발생하게 된다. 이러한 현상은 3차원 모델의 좌표의 연결정보에 손상을 주게 된다. 본 논문은 이러한 3차원 정보의 손상을 효과적으로 복원하기 위한 연구에 관한 것이며, Mesh의 면을 이루는 각 꼭지점의 좌표들의 연결 정보가 손실되지 않는 스트립에서는 약간의 차이는 있을 수 있으나, 완벽한 복원을 하였고, 두 개 이상의 스트립이 붙어서 손상된 경우나, 좌표의 연결 정보가 없는 경우에는 조건에 따라 현저히 좋은 격과를 얻을 수 있었다.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1997.10a
• /
• pp.41-44
• /
• 1997

This paper is to provide an integration approach between design and process planning for mechanical parts, using feature recognition. We develop a method to extract each individual feature of an object from 3D modeling data using face-edge graph based algorithm and then propose an approach to recognize the volumic form features using heuristic rules. we demonstrate the proposed approaches are effective for such basic shapes as pocket, slot, through hole, etc.

• Land and Housing Review
• /
• v.13 no.3
• /
• pp.115-123
• /
• 2022

Recently, the adoption of BIM technology in domestic civil engineering projects has continually increased both in its numbers and scope. However, the BIM model was developed and used after the 2D design was developed instead of creating the BIM model from the conceptual design phase. BIM must be used throughout every phase of design and construction to use BIM for its original purpose. However, if BIM application is applied in heavy civil projects without a step-by-step guideline, it can confuse the market and face industry resistance to using BIM. Therefore, BIM is currently being used step by step in the civil engineering field by using BIM as a conversion design. However, the BIM conversion design method, currently being performed in the Preliminary design stage, has many difficulties due to low work efficiency. This paper analyzes the existing process of converting a 2D design into a 3D BIM model while addressing the issues related to its low work efficiency. To this end, a novel approach to 2D to BIM conversion for the design development stage is proposed.

• The Journal of the Korea Contents Association
• /
• v.18 no.12
• /
• pp.218-228
• /
• 2018

The purpose of this study was to present a educational content developed for training of dental extraction skill in a virtual environment. The development of the content consists of five steps: learning content analysis, draw a design model, development, test of validity, rectification and complete of the content. We developed the virtual reality (VR) simulator with producing an animation of surgical stages on the 3D models of human face for simulating dental extraction procedure. The results of validity tests for the content were mean 4.81 (SD, 0.72) for interface validity and mean 4.66 (SD, 0.71) for content validity, which represents strong evidence for the validity of the content. The data of the study indicates that the educational content developed for training of dental extraction skill using VR technology can be suitable to improve surgical skill of dental extraction in clinical field. We expect that further development of the education contents based on the VR technology to improve various surgical skills in clinical field will be addressed in the future.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.699-702
• /
• 2001

The increasing demand in industry to produce rectangular cans at the reduction by the rectangular backward extrusion process involves better understanding of this process. In 2-D die deflection and dimensional variation of the component during extrusion, punch retraction, component injection and cooling was conducted using a coupled thermal-mechanical approach for the forward extrusion of aluminum alloy and low-carbon steel in tools of steel. Backward extrusion FE simulation and experimental simulation by physical modeling using wax as a model material have been performed. These simulations gave good results concerning the prediction of th flow modes and the corresponding surface expansions of the material occuring at the contact surface between the can and the punch. There prediction are the limits of the can height, depending on the reduction, the punch geometry, the workpiece material and the friction factor, in order to avoid the risk of damage caused by sticking of the workpiece material to the punch face. The influence of these different parameter on the distribution of the surface expansion along the inner can wall and bottom is already determined. This paper deals with the influence of the geometry changes of the forming tool and the work material in the rectangular backward using the 3-D finite element method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.5
• /
• pp.585-590
• /
• 2019

The purpose of this study is to summarize the changes in virtual reality utilization in model houses through the time-by-year example of model houses and to study the use and future development of virtual reality technologies in model houses. As a result of compiling and analyzing characteristics of virtual reality utilization flow in model houses of apartments, it is as follows. First, the market for apartment model houses using virtual reality was gradually expanded for the purpose of brand promotion by private construction companies. Second, technologies that utilize virtual reality in apartment sales are changing from virtual space construction to virtual content implementation. Third, it is changing from the existing method of face-to-face and method of accessing actual promotional media to the form of publicizing apartments using virtual reality. Through this research, it is estimated that it will be used as an information medium and a form of experience using physical environment and virtual reality in a physical model house for consumers looking for model houses. This study presents the future direction of the model house, and develops it as a post-sale maintenance / management system through ICT technology (3D scanning, 3D modeling, virtual content) Further research on the technology is expected to be needed.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.44 no.4
• /
• pp.626-638
• /
• 2020

In this study, protective masks were designed in varying internal volume and analyzed in regards to wearing effect. Masks were measured by surface temperature and subjective wear evaluation. Four experimental masks were created with an increasing distance between the mask center line and nose in increments. The distances were set at 0.0 cm (M0), 2.0 cm (M2), 4.0 cm (M4), and 6.0 cm (M6). The area and volume of each experimental mask was measured and both measurements had a positive correlation with the set distances. Among the experimental masks, M2 was the most breathable. The heat between the face and the mask created by exhalation was able to escape from the mask and provided the highest comfort sensation when worn. Conversely, an internal volume that is too large would decrease its comfort because repetitive breathing deforms the appearance of the mask and adversely affects its fit. Therefore, creating and maintaining the optimal internal volume of the M2 mask is important to achieve maximum thermal sensation and ease of wear.

• Journal of the Korean Geophysical Society
• /
• v.9 no.1
• /
• pp.47-62
• /
• 2006

More than 70% of Korean Peninsula is consisted of mountains, so that lots of roads, rail-roads and tunnel,which play a pivotal role in the industry activity, are existed along the rock-slope and in the rock-mass. Thus,it is urgent that tegration of management system through the optimum survey and design of rock-slope excavation, proper stabilization method and database of rock-slope. However, conventional methods have shortcoming with the economy of survey time and human resources, and the overcome of difficulties of approach to the in-situ rock-slope. To overcome the limitation of conventional method, this paper proposed the development of remote measurement system using Terrestrial Laser Scanning System. The method using Terrestrial 3D Laser Scanning System, which can get 3D spatial information on the rock-slope and2)Dept. Geosystem Engineering, Kangwon National University, Korea tunnel, has an advantage of reduction of measurement time and the overcome of difficulties of approach to the in-situ rock-slope/dam/tunnel. In the case of rock-slope, through the analysis of 3D modeling of point-cloud by Terrestrial Laser Scanning System, orientation of discontinuity, roughness of joint surface, failure shape and volume were successively achieved. in the case of tunnel face, through reverse-engineering, monitoring of displacement was possible.