• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제55권3호
• /
• pp.123-130
• /
• 2006

This paper presents characteristics analysis of skewed Synchronous Reluctance Motor using equivalent magnetic circuit and compares with the result of Finite Element Method. Torque ripple must be reduced, because it is producing noise and vibration. There is many kinds of method to reduce torque ripple, but generally we apply skewing stator or rotor. The 2D Finite Element Method(FEM) or 3D FEM is used to analyze the motor, since skew influence the average torque in the motor. However, the FEM takes much time in spite of the advanced computer and numerical technique. This paper will analyze characteristics of skewed synchronous reluctance motor using equivalent magnetic circuit.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 춘계학술대회 논문집
• /
• pp.184-187
• /
• 2005

Forging process is one of the forming process and is used widely in automobile parts and manufacture industry. Especially the gears like spur gear, helical gear, bevel gear were produced by machine tool, but recently they have been manufactured by forging process. The goal of this study is to study forming process with data obtained by comparison between forward extrusion and upsetting simulation results and formability improvement by various heat treatment conditions. By analysis data of 3D FEM by upsetting and forward extrusion forming, the forming process of clutch gear develops using data based on 3D FEM analysis. Through tensile test using specimens by various heat treatment conditions, the optimal heat treatment condition is obtained by comparison the results of tensile test.

• 열처리공학회지
• /
• 제14권4호
• /
• pp.228-234
• /
• 2001

The present study was an attempt for systematic data conversion between FDM and FEM in order to evaluate the thermal stress distribution during quenching process. It has been generally recognized that FDM is efficient in flow and temperature analysis and FEM in that of stress. But it induced difficulty and tedious work in analysis that one uses both FDM and FEM to take their advantages because of the discrepancy of nodes between analysis tools. So we proposed field data conversion procedure from FDM to FEM in 3-dimensional space, then applied this procedure to analysis of quenching process. The simulation procedure calculates the distributions of temperature and microstructure using FDM and microstructure evolution equations of diffusion and diffusionless transformation. FEM was used for predicting the distributions of thermal stress. The present numerical code includes coupled temperaturephase transformation kinetics and temperature-microstructure dependent material properties. Calculated results were compared with previous experimental data to verify the method, which showed good agreements.

• 한국지반신소재학회논문집
• /
• 제18권1호
• /
• pp.39-53
• /
• 2019

현장에서의 양방향재하시험은 극한지지력을 판단할 수 있는 하중재하 단계까지의 재하시험이 실시되지 않기 때문에 항복하중 및 극한하중을 정확하게 알 수 없는 문제점이 있다. 그리고 정적압축재하시험과 달리 주면과 선단이 분리되어 하중이 전이되고, 주면부의 하중재하 방향이 반대이기 때문에 실제 말뚝의 거동과 다른 결과를 나타낼 우려가 있다. 따라서 본 연구에서는 대구경 현장타설말뚝인 바렛말뚝의 현장 양방향재하시험 결과로부터 3차원 유한요소해석을 실시하고, 재산정된 설계정수를 정적압축재하시험의 3차원 유한요소해석에 적용하여 수치해석을 실시하였으며, 그 결과로부터 현장타설말뚝의 실제 거동을 추정하는 방법을 제안하였다. 먼저, 현장타설말뚝의 현장 양방향재하시험 결과를 이용하여, 상 하향으로의 하중재하에 따른 하중-변위 분석을 실시하였다. 그리고 양방향재하시험을 3차원 유한요소해석을 통해 모사하고 역해석을 실시하여 재산정된 설계정수들을 정적압축재하시험의 3차원 유한요소해석에 적용하였으며, 이 결과로부터 양방향재하시험을 통한 정적압축재하시험의 거동을 분석하였다. 양방향재하시험을 통한 정적압축재하시험의 3차원 유한요소해석 결과를 {정적압축재하시험과 양방향재하시험의 지지력 비(y)} ~ {기준침하량과 말뚝주면장 비(x)}의 관계식으로 나타내었고, 10.0mm, 15.0 mm, 25.4mm일 때의 기준침하량에 따라 각각 구분하여 제안하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.306-310
• /
• 2014

The purpose of this study is the stability evaluation of a vacuum pump through modal test and rotor dynamics. Eigenvalue was solved by the finite-element method(FEM) using 2D and 3D models, then the modal test result was compared with the FEM result. According to the comparison, the analysis result using the 2D was more accurate than the 3D model. Therefore, rotor dynamics was performed by the 2D model. Campbell diagram and root-locus maps, which were calculated by complex-eigenvalue analysis, were used to evaluate the stability of the rotors of the vacuum pump. And displacement solved by unbalance response analysis was compared with the minimum clearance between two rotors of the vacuum pump. Thus, the vacuum pump is assumed operated under steady state through the evaluation of the rotor dynamics.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.750-751
• /
• 2008

본 논문은 컨버터용 변압기의 여자전류 해석을 통해 DC 성분 유입시 자속밀도-여자전류 곡선 그래프를 도출하여 철심포화 여부를 확인하며, 철심 공극에 의해 발생되는 누설자속(Leakage Flux)으로 인한 철구조물(Lock Plate)의 와전류 손실을 계산하였다. 변압기 해석을 위해 상용 해석 소프트웨어인 Maxwell 3D를 이용하였고, 철심의 비선형성을 고려하여 해석하였다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2000년도 가을 학술발표회논문집
• /
• pp.11-17
• /
• 2000

,An residual stress and out-of plane deformation produced by butt welding was analyzed by four kinds of 3D-FEM programs(Thermal El-P1 Analysis) developed by authors. The magnitude of deformation of perpendicular to the welding line generated by butt welding was large when the reduced integration method was used. This was because of removal of the locking phenomenon, which it was generally known that the stiffness of the shear component of out-of-plane was largely evaluated. And the magnitude of residual stress was analyzed by using the FEM program based on a large and small deformation theory was similar to that was analyzed by the redeced integration method.

• The Journal of the Acoustical Society of Korea
• /
• 제21권3E호
• /
• pp.112-118
• /
• 2002

An unconstrained tuning fork with a 3-D model has been numerically analyzed by Finite Element Method (FEM) and Boundary Element Method (BEM). The first three natural frequencies were calculated by the FEM modal analysis. Then the trend of the change of the modal frequencies was examined with the variation of the tuning fork length and width. An formula for the natural frequencies-tuning fork length relationship were derived from the numerical analysis results. Finally the BEM was used for the sound pressure field calculation from the structural displacement data.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2006년도 제27회 추계학술대회논문집
• /
• pp.3-6
• /
• 2006

본 논문에서는 분리장치 개발을 위해 3D 형상설계 및 유소요소법을 이용한 구조해석을 수행하였다. 이를 기반으로 시제품을 제작하였으며, 여러 환경시험을 수행하여 신뢰도를 향상시켰다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.1201-1204
• /
• 2003

An unconstrained tuning fork with a 3-D model has been numerically analyzed by Finite Element Method(FEM) and Boundary Element Method (BEM). The first three natural frequencies were calculated by the FEM modal analysis. Then the trend of the change of the modal frequencies was examined with the variation of the tuning fork length and width. An formula for the natural frequencies-tuning fork length relationship were derived from the numerical analysis results. Finally the BEM was used fur the sound pressure field calculation from the structural displacement data.