• 한국자기학회지
• /
• 제5권5호
• /
• pp.442-446
• /
• 1995

Electronic structures of Fe overlayers on Cr(Fe/Cr) films, with an Fe coverage of $1-20{\AA}$, have been investigated by using photoemission spectroscopy. Experimental results are compared with supercell band structure calculations for a system with monolayer (ML) Fe on each side of five layer Cr, Fe(1ML)/Cr(5ML)/Fe(1ML). The extracted Fe 3d partial spectral weight in Fe/Cr exhibits very interesting features for very thin Fe overlayers. First, a sharp emissionnear the Fermi energy is observed, which is expected to originate primarily from hybridization between Fe and Cr 3d electrons at the Fe/Cr interface, and partially from the Fe 3d surface states in the Fe overlayer. Second, other structures are observed at higher binding energies which resemble the Cr 3d valence bands, also suggesting large hybridization between Fe and Cr 3d states at the Fe/Cr interface. These conjectures are confirmed by band structure calculations for Fe(1ML)/Cr(5ML)/Fe(1ML).

• Asian-Australasian Journal of Animal Sciences
• /
• 제18권2호
• /
• pp.226-229
• /
• 2005

An experiment was conducted to produce eggs enriched with vitamins $D_3$, K and iron in eggs. Six hundred 97-wk-old ISA Brown force molted hens were allocated to completely randomized block arrangement of six dietary treatments: T1; control (C), T2; C+4,000 IU vitamin $D_3$+2.5 mg vitamin K+100 ppm Fe, T3; C+8,000 IU vitamin $D_3$+5.0 mg vitamin K+100 ppm Fe, T4; C+12,000 IU vitamin $D_3$+7.5 mg vitamin K+100 ppm Fe, T5; C+16,000 IU vitamin $D_3$+10.0 mg vitamin K+100 ppm Fe, T6; C+20,000 IU vitamin $D_3$+12.5 mg vitamin K+100 ppm Fe. Fe was supplemented with Fe-methionine. Each treatment consisted of five replicates of ten cages with two birds per cage. Egg production and egg weight were highest in T2 and incidence of soft and broken egg was highest in T6. Haugh unit was not different among treatments although it tended to be increased as dietary vitamins $D_3$ and K increased. Eggshell strength was not different among treatment. Concentrations of vitamin $D_3$ and K in egg yolk increased and plateaued approximately 20 days after feeding supplemented diets. The level of these vitamins peaked at 12,000 IU/kg vitamin $D_3$ and 7.5 mg/kg vitamin K supplementation and then decreased at the higher than these supplementation levels. The peak concentrations of vitamin $D_3$ and vitamin K were 4.6 times and 4.8 times greater than the control, respectively. Supplementary Fe also increased Fe content in egg yolk. It is concluded that vitamin $D_3$ and K in eggs can be effectively enriched by proper supplementation time and level of these vitamins.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제1권3호
• /
• pp.141-157
• /
• 2001

Highly reliable packaged 64kbit ferroelectric memories with $0.8{\;}\mu\textrm{m}$ CMOS ensuring ten-year retention and imprint at 125^{\circ}C$ have been successfully developed. These superior reliabilities have resulted from steady integration schemes free from the degradation, due to layer stress and attacks of process impurities. The resent results of research and development for ferroelectric memories at Hynix Semiconductor Inc. are summarized in this invited paper.

• 한국초전도ㆍ저온공학회논문지
• /
• 제18권2호
• /
• pp.5-7
• /
• 2016

We present an experimental investigation of the superconducting transition temperatures, $T_c$, of superconductor/ferromagnet bilayers with varying the thickness of ferromagnetic layer. FeN was used for the ferromagnetic (F) layer, and NbN and Nb were used for the superconducting (S) layer. The results were obtained using three different-thickness series of the S layer of the S/F bilayers: NbN/FeN with NbN thickness, $d_{NbN}{\approx}9.3nm$ and $d_{NbN}{\approx}10nm$, and Nb/FeN with Nb thickness $d_{Nb}{\approx}15nm$. $T_c$ drops sharply with increasing thickness of the ferromagnetic layer, $d_{FeN}$, before maximal suppression of superconductivity at $d_{FeN}{\approx}6.3nm$ for $d_{NbN}{\approx}10nm$ and at $d_{FeN}{\approx}2.5nm$ for $d_{Nb}{\approx}15nm$, respectively. After shallow minimum of $T_c$, a weak $T_c$ oscillation was observed in NbN/FeN bilayers, but it was hardly observable in Nb/FeN bilayers.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2000년도 International Symposium on Magnetics The 2000 Fall Conference
• /
• pp.584-584
• /
• 2000

Electronic structures of ordered Fe$_3X (X = Al, Si), and their derivative ternary alloys of Fe_2TX (T = 3d transition metal) have been investigated by using the linearized muffin-tin orbital (LMTO) band method. The role of the coupling between substituted transition metal and its neighbors is investigated by calculating the magnetic moments and local density of states (LDOS). It is shown that it is essential to include the coupling beyond nearest neighbors in obtaining the magnetic moment of Fe alloy. The preferential sites of T impurities in Fe_3X are determined from the total energy calculations. The derivative ternary alloys of Fe_2TX have characteristic electronic structures of semi-metal for Fe_2VAI and (nearly) half-metal for Fe_2TAI (T = Cr, Mn) and Fe_2TSi (T = V, Cr, Mn)

• Bulletin of the Korean Chemical Society
• /
• 제32권1호
• /
• pp.95-99
• /
• 2011

$CaTi_{1-x}Fe_xO_3(0{\leq}x{\leq}0.4)$ solid solution photocatalysts were synthesized by iron doping during the conventional solid state reaction at $1100^{\circ}C$ for 5 h and characterized by ultraviolet-visible (UV-vis) absorption spectroscopy, X-ray diffraction, morphological analysis. We found that $CaTi_{1-x}Fe_xO_3$ samples not only absorb UV but also the visible light photons. This is because the Fe substitution at Ti-site in $CaTi_{1-x}Fe_xO_3$ lattice induces the band transition from Fe3d to the Fe3d + Ti3d hybrid orbital. The photocatalytic activity of Fe doped $CaTiO_3$ samples for hydrogen production under UV light irradiation decreased with the increase in the Fe concentration. There exists an optimized concentration of iron in $CaTiO_3$, which yields a maximum photocatalytic activity under visible light ($\lambda\geq420nm$) photons.

• 한국자기학회지
• /
• 제21권2호
• /
• pp.43-47
• /
• 2011

Fe-Al 계의 전이금속 화합물은 구조적 안정성과 자성에 대한 이견이 많은 것으로 알려져 있다. 본 연구에서는 B2, $L1_2$, 및 $D0_3$ 구조를 갖는 Fe-Al 계 화합물의 자성과 원자구조의 상관관계를 논의하기 위해 전전자 총퍼텐셜선형보강평면파(all-electron fullpotential linearized augmented plane wave; FLAPW) 방법을 이용하여 일반기울기 근사(generalized gradient approximation; GGA) 하에서 계산하였다. 고려한 모든 구조에서 강자성이 비자성에 비해 안정한 것으로 계산되었다. Fe 원자의 계산된 스핀 자기모멘트는 B2, $L1_2$ 구조에서 각각 0.771 ${\mu}_B$, 2.373 ${\mu}_B$의 값을 얻었고, $D0_3$ 구조의 Fe(I) 및 Fe(II) 원자들은 각각 2.409 ${\mu}_B$, 1.911 ${\mu}_B$로 계산 되었다. $Fe_3Al$의 같은 조성을 갖는 $L1_2$와 $D0_3$ 구조간의 안정성을 조사하기 위하여 형성 엔탈피 계산을 통해 강자성 상태에서 16 meV/atom의 에너지 차이로 $D0_3$ 구조가 $L1_2$ 구조보다 더 안정함을 확인하였다. 이 결과는 실험연구와 잘 일치하며, 원자구조와 전자구조의 분석을 통해 구조적 안정성과 자성에 대해 이해하였다.

• 한국자기학회지
• /
• 제5권5호
• /
• pp.552-555
• /
• 1995

The magnetic properties of Mg-Mn ferrites were investigated in the composition range of $Mg_{a}Mn_{b}Fe_{c}O_{4\pm\delta}$ (a+b+c=3) with the addition of $Al_{2}O_{3}$. In $MgO-MnO-Fe_{2}O_{3}$ ternary system, the spinel single phase existed within the composition range of MgO-50 mol%, MnO-70 mol% and $Fe_{2}O_{3}-60\;mol%$. The saturation magnetic flux density increased with the increase of $Fe_{2}O_{3}$ content and showed the maximum at the stoichiometric composition of $(Mg,Mn)Fe_{2}O_{4}$. In $Mg_{x}Mn_{1-x}Fe_{2}O_{4}(x=0.2~0.8)$ system, the saturation magnetic flux density showed the maximum at $Mg_{0.2}Mn_{0.8}Fe_{2}O_{4}$. The addition of $Al_{2}O_{3}$ resulted in the decrease of saturation magnetic flux density but increased the electrical resistivity.

• 전기학회논문지
• /
• 제65권5호
• /
• pp.773-776
• /
• 2016

In the quasi-3D finite element(FE) anlysis, the overall characteristics of axial flux permanent magnet(AFPM) motor could be composed of each computation region. However, A drawback of quasi-3D FEM is not to consider the end effect on the stack end. To address this problem, an improved quasi-3D FE analysis which considers the end effect of the AFPM motor was proposed. From results the 3D FE analysis, the validity of the proposed method is verified.

• Bulletin of the Korean Chemical Society
• /
• 제21권6호
• /
• pp.588-594
• /
• 2000

Structural changes of an iron phthalocyanine (FePC) monolayer induced by adsorption and externally applied potential on high area carbon surface have been investigated in situ by iron K-edge X-ray absorption fine structure (XAFS) in 0.5 M $H_2S0_4.$ Fine structures shown in the X-ray absorption near edge structure (XANES) for microcrystalline FePC decreased upon adsorption and further diminished under electrochemical conditions. Fe(II)PC(-2) showed a 1s ${\rightarrow}$ 4p transition as poorly resolved shoulder to the main absorption edge rather than a distinct peak and a weak 1s ${\rightarrow}$ 3d transition. The absorption edge position measured at half maximum was shifted from 7121.8 eV for Fe(lI)PC(-2) to 7124.8 eV for $[Fe(III)PC(-2)]^+$ as well as the 1s ${\rightarrow}$ 3d pre-edge peak being slightly enhanced. However, essentially no absorption edge shift was observed by the 1-electron reduction of Fe(Il)PC(-2), indicating that the species formed is $[Fe(II)PC(-3)]^-$. Structural parameters were obtained by analyzing extended X-ray absorption fine structure (EXAFS) oscillations with theoretical phases and amplitudes calculated from FEFF 6.01 using multiple-scattering theory. When applied to the powder FePC, the average iron-to-phthalocyanine nitrogen distance, d(Fe-$N_p$) and the coordination number were found to be 1.933 $\AA$ and 3.2, respectively, and these values are the same, within experimental error, as those reported ( $1.927\AA$ and 4). Virtually no structural changes were found upon adsorption except for the increased Debye-Wailer factor of $0.005\AA^2$ from $0.003\AA^2.$ Oxidation of Fe(II)PC(-2) to $[Fe(III)PC(-2)]^+$ yielded an increased d(Fe-Np) (1 $.98\AA)$ and Debye-Wailer factor $(0.005\AA^2).$ The formation of $[Fe(II)PC(-3)]^-$, however, produced a shorter d(Fe-$N_p$) of $1.91\AA$ the same as that of crystalline FePC within experimental error, and about the same DebyeWaller $factor(0.006\AA^2)$.