• 한국도로학회논문집
• /
• 제18권5호
• /
• pp.31-37
• /
• 2016

PURPOSES : The purpose of this study is to evaluate the effect of the quiet pavement on reducing a barrier height by using a prediction tool called SoundPLAN. METHODS : Firstly, the prediction was carried out to evaluate the difference in the maximum noise level at a building facade between the normal and the quiet pavements without a barrier. After calculating the noise reduction effect by the quiet pavement, a comparable barrier height to obtain the same noise reduction effect with it was predicted according to designable factors including road-building distance(10 m, 20 m, 40 m) and road-barrier distance(5 m, 10 m, 20 m, 30 m). RESULTS : The result showed that within the considered designable factors, the maximum barrier height was 37 m, 52 m, and 55 m to have the same noise reduction effect by the quiet pavement reducing 1 dBA, 3 dBA, and 5 dBA, respectively. It was evaluated that the barrier height increased with the increase of the road-building and road-barrier distances. To simulate the real situation in urban areas and to evaluate the combined effect of the normal/quiet pavement and barrier, the barrier height was fixed as 6 m. It was predicted that the noise level would reduce to as low as 0.2 dBA by the combination of normal pavement and barrier. On the other hand, the combination of the quiet pavement and barrier reduced 1.2 dBA, 3.2 dBA, and 5.2 dBA, respectively, for quiet pavement reducing 1 dBA, 3 dBA, and 5 dBA. CONCLUSIONS : A guideline needs to be suggested to select appropriate noise abatement schemes by considering factors such as the roadbuilding and road-barrier distances.

• 조명전기설비학회논문지
• /
• 제26권7호
• /
• pp.39-44
• /
• 2012

This paper deals with the characteristic analysis of small power brushless DC (BLDC) motor considering the rotor magnet overhang flux. In the driving characteristics analysis using 2D FEA (Finite Element Analysis), the rotor magnet overhang effect can't be considered and it should be neglected. To consider rotor magnet overhang effect, 3D FEA should be required. But 3D FEA requires very long calculation time even though the high specification computer is used. In this paper, the 3D electromagnetic model of BLDC motor is approximated as the 2D electromagnetic model considering overhang effect. In this paper, the concept of overhang coefficient is applied, and the coefficient according to load torque variance is deduced.

• 한국의류학회지
• /
• 제46권2호
• /
• pp.321-330
• /
• 2022

This study analyzed the difference between 2D image and 3D virtual clothing images based on stripe arrangement to obtain fundamental data for slim appearance. First, the slimming effect according to the three types of stripe ratio was examined. Subsequently, the slimming effects of seven types of one-piece dress designs according to the stripe location were analyzed. Subjective ranking was evaluated. The width items and radius of curvature were measured for the image's respective parts. Consequently, in 2D image and 3D virtual clothing images, the one with the narrowest stripe ratio was evaluated as the slimmest; however, the conditions for the slimming effect were different. In the seven one-piece dress designs, a difference was apparent in the ranking of the 2D image and 3D virtual clothing images. In the 3D virtual clothing image, arranging the stripes on the entire garment proved inefficient. The stripes were curved according to the curvature of the human body, creating an optical illusion that differed from that of the 2D image.

• 대한약학회:학술대회논문집
• /
• 대한약학회 2003년도 Proceedings of the Convention of the Pharmaceutical Society of Korea Vol.2-2
• /
• pp.201.3-201.3
• /
• 2003

The ethanol extract from the fruit of Terminalia chebula (Combretaceae) and the hook of Uncaria sinensis (Rubiaceae) exhibited significant inhibitory activity on oxidative stress and the age-dependent shortening of the telomeric DNA length. In the peroxidation model using t-BuOOH, human epidermal keratinocytes-neonatal foreskin (HEK-N/F) cells were treated with the T. chebula and U. sinensis extracts. The results showed a notable enhancing effect on the cell viability of 60.5 ${\pm}$ 3.8 and 65.0 ${\pm}$ 3.0%, respectively, by 50 $\mu\textrm{g}$/ml of the extracts. (omitted)

• 한국방사선학회논문지
• /
• 제12권7호
• /
• pp.909-917
• /
• 2018

3D 프린팅 기술은 4차산업 혁명 중 제조업의 혁신적인 기술로서 전망되고 있으며, 현재 바이오 의료 분야를 포함한 다양한 분야에서 활용되고 있다. 본 연구에서는 이러한 3D 프린팅 기술을 이용한 제작 원료에 대한 방사선 차폐능을 평가하고자 몬테카를로 전산모사를 통해 프린팅 원료에 대한 검증을 수행하였다. 현재 범용으로 사용되는 FDM 방식의 3D 프린터에서 이용 가능한 원료들을 대상으로 하였으며, ICRU phan tom과 차폐체를 모의 모사한 후 방사선의 종류 및 에너지에 따른 입자 플루언스 평가를 통해 차폐 효과에 대해 분석하였다. 그 결과, 광자선의 경우 에너지 증가에 따라 차폐 효과는 점차 감소되는 경향을 보였고, 원료별 차폐 효과는 TPU, PLA, PVA, Nylon, ABS 순서로 점차적으로 낮아지는 결과를 나타냈다. 중성자선의 경우, 5~10 mm의 낮은 두께에서 반대로 선속이 증가되는 현상을 보였으나, 일정 두께 이상에서는 유효한 차폐 효과를 나타내었으며, 프린팅 원료별 차폐 효과는 Nylon, PVA, ABS, PLA, TPU 순서로 점차 낮아지는 결과를 보였다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제3권4호
• /
• pp.313-318
• /
• 1990

Forty-two outbred female Sprague-Dawley rats weighing 145 g were used to study the effects of a beta-agonist, cimaterol, on growth, body composition and urinary excretion of 3-methylhistidine (MH) at 3, 6 and 18 d. Cimaterol (CIM) was administered in the feed at 10 mg/kg. The growth promoting effect of CIM was most evident during the initial part of the feeding period, followed by a gradual decrease in the magnitude of the response with no significant effect at 18 d. The action of CIM was confined to skeletal and cardiac muscles with no stimulating effect on other organs. The amount of urine excretion and urinary MH excretion was reduced (p<.01) at 3 d in the CIM group. No difference was found at 6 d, followed by an increased urine excretion (p<.05) and MH excretion (p<.01) at 18 d. An inverse relationship between growth rate and urinary MH excretion suggested that the increased growth rate of CIM-fed rats during the initial part of the feeding period is primarily attributed to the decreased protein degradation rate. It was further suggested that both fractional synthesis rate and fractional degradation rate increased during the later part of the feeding period.

• Journal of Nutrition and Health
• /
• 제29권9호
• /
• pp.943-949
• /
• 1996

Bone mineral density depends largely on the status of dietary minerals such as Ca, P, Mg, and F and proteins, physical activities, parathyroid hormone(PTH), calcitonin(CT), and vitamin D. The decrease of bone density often results in bone fractures and osteoporosis which is prevalent among postmenopausal women. This study was intended to examine the role of parathyroid hormone, calcitonin and cholecaliferol in bone density of mice that were fed different dual photon energy beams. We have measured three major parts of the bone : whole body, head and femur. The results are summarized as follows : 1) Bone mineral density (BMD) was more increased by feeding high Ca diet compared to that of the low Ca diet. 2) Both PTH and Vit D3 enhanced BMD in all of the different Ca levels. 3) When the dietary Ca was deequate CT showed a synergistic effect with PTH in boosting bone density, while CT+Vit D3 showed a negative effect. 4) CT tended to inhibit the effect of increasing bone density by PTH and Vit D3 in medium and low Ca groups. 5) The effect of increasing bone density by PTH in the head of mouse increased when dietary Ca was lower : The increment of bone density by PTH in high, medium, and low Ca was 3%, 8%, 19%, respectively. 6) Femur bone density was affected significantly by dietary Ca levels than hormones. The above observations indicate that bone mineral density can be improved by high dietary Ca and hormone injections including PTH, CT and cholecalciferol, and thus proper dietary and hormonal treatment may be used in preventing bone fractures and osteoporosis.

• Journal of information and communication convergence engineering
• /
• 제19권3호
• /
• pp.180-187
• /
• 2021

In this paper, we present a computational volumetric reconstruction method for three-dimensional (3D) photon counting imaging with enhanced visual quality when low-resolution elemental images are used under photon-starved conditions. In conventional photon counting imaging with low-resolution elemental images, it may be difficult to estimate the 3D scene correctly because of a lack of scene information. In addition, the reconstructed 3D images may be blurred because volumetric computational reconstruction has an averaging effect. In contrast, with our method, the pixels of the elemental image rearrangement technique and a Bayesian approach are used as the reconstruction and estimation methods, respectively. Therefore, our method can enhance the visual quality and estimation accuracy of the reconstructed 3D images because it does not have an averaging effect and uses prior information about the 3D scene. To validate our technique, we performed optical experiments and demonstrated the reconstruction results.

• 기술혁신연구
• /
• 제24권3호
• /
• pp.81-105
• /
• 2016

본 연구는 ICT산업의 연구개발투자에 따른 비용저감 효과를 계측하는데 그 목적이 있다. 일반적으로 연구개발투자는 제품혁신과 공정혁신을 유발하고, 또 이들은 각각 매출증대와 비용저감 효과를 견인하는 것으로 알려져 있다. 그러나 기 수행된 실증연구들을 살펴보면, 그 대부분이 연구개발투자의 매출증대 기여부분에 초점을 두고 있다. 이에 본 연구는 최근 주목받고 있는 ICT산업을 중심으로 연구개발투자의 비용저감 효과를 분석해 보았다. 이를 위해 초월대수 비용함수와 비용점유율 방정식을 설정하였으며, SUR방법을 통해 실증적으로 분석하였다. 그 분석결과, 연구개발투자에 따른 총비용의 감소효과는 유의한 것을 확인할 수 있었다. 추가적으로 연구개발투자와 각 생산요소들 간의 관계를 살펴보았는데, 연구개발투자와 중간투입은 상호 대체관계, 노동 및 자본과는 보완관계인 것으로 나타났다.

• 한국의류학회지
• /
• 제38권4호
• /
• pp.440-454
• /
• 2014

This study examined the wearing effect of 3D compression suits on quantitative electroencephalogram (EEG) during walking and rest. Ten males in their 20s wore three types of experimental clothing, a loose-fit wear (BS), a 3D compression suit (3D CS), and a power film welded on CS (3D WCS); in addition, EEG signals were measured during resting, walking, after walking, and after sit-ups. The results showed that a higher pressure (due to 3D CS and 3D WCS) increased the 'Concentration' level and the 'Cognitive load' of brain waves during treadmill walking due to a higher cortex activity level when walking. Differentiation was shown between two compression suits and BS was enhanced during walking on a treadmill; however, the brain waves of 'Relaxation' between two compression suits were significantly different after walking, i.e., 'Relaxation' level of 3D WCS was the highest. Rigorous exercise such as sit-ups was inefficient to distinguish the effect of compression suits on EEG. Participants perceived a higher pressure due to compression suits; however, the wear comfort of two compression suits was maintained. Two compression suits were rated as supportive and helpful during walking. Various EEG parameters such as the indices of 'Relaxation', 'Concentration' and 'Cognitive load' were effective to observe the effect of 3D compression suits on wearers' brain waves during and after walking.