• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.11C
• /
• pp.1053-1059
• /
• 2005

The computer generated hologram (CGH) designs and produces digital information for generating 3-D (3-Dimension) image using computer and software instead of optically-sensed hologram of light interference, and it can synthesis a virtual object which is physically not in existence. Since digital hologram includes an amount of data as can be seen at the process of digitization, it is necessary that the data representing digital hologram is reduced for storing, transmission, and processing. As the efforts that are to handle hologram with a type of digital information have been increased, various methods to compress digital hologram called by fringe pattern are groped. Suitable proposal is encoding of hologram. In this paper, we analyzed the properties of CGH using tools of frequency transform, assuming that a generated CGH is a 2D image by introducing DWT that is known as the better tool than DCT for frequency transform. The compression and reconstruction result which was extracted from the wavelet-based codecs illustrates that it has better properties for reconstruction at the maximum 2 times higher compression rate than the Previous researches of Yoshikawa[2] and Thomas[3].

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.1
• /
• pp.157-165
• /
• 2013

In this paper, efficient digit-serial VLSI architecture for 1D (9,7) lifting-based discrete wavelet transform (DWT) filter has been proposed. The proposed architecture computes the DWT in digit basis, so that the required hardware is reduced. Also, the multiplication is replaced with the shift and add operation to minimize the hardware requirement. Bit allocation for input, output, and the internal data has been determined by analyzing the PSNR. We have carefully designed the data feedback latency not to degrade the performance in the recursive folded scheduling. The proposed digit-serial architecture requires small amount of hardware but achieve 100% of hardware utilization, so we try to optimize the tradeoffs between the hardware cost and the performance. The proposed architecture has been designed and verified by VerilogHDL and synthesized by Synopsys Design Compiler with a DongbuHitek $0.18{\mu}m$ STD cell library. The maximum operating frequency is 330MHz with 3,770 gates in equivalent two input NAND gates.

• Journal of the Institute of Convergence Signal Processing
• /
• v.9 no.4
• /
• pp.253-260
• /
• 2008

Image denoising as one of image enhancement methods has been studied a lot in the spatial and transform domain filtering. Recently wavelet transform which has an excellent energy compaction and a property of multiresolution has widely used for image denoising. But a transform based on human visual system is visually useful if an end user is human beings. Therefore, Gabor cosine and sine transform which is considered as human visual filter is applied to image denoising areas in this paper. Denoising performance of the proposed transform is compared with those of the derivatives of Gaussian transform being another human visual filter and of discrete wavelet transform in terms of PSNR. With three levels of various noises, experimental results for real images show that the proposed transform has better PSNR performance of 0.41dB than DWT and 0.14dB than DGT.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.5 no.2
• /
• pp.99-111
• /
• 1999

The object of this study is to get the superior double hull structure to its crashworthiness against collision comparing absorbed energy capacities of its various types with each other, varying material properties, collision positions and velocities, and structural arrangements such as double hull width, web and stringer spaces, etc. Local absorbed energy capacities, failure behaviors and damage extents of their members are also considered during collision in addition to the estimations of their global ones. This paper describes a series of numerical simulations of collisions between DWT 45,000 oil tanker(struck ship) and DWT 10,500 rigid one(striking ships) using Hydrocode LS/DYNA3D. Collisions are assumed to occur at the middle of struck ship with striking one moving at right angle to its centerline. The following remarks were obtained through this study: More flexible the double hull structure is, much superior its crashworthiness against collision is. The increment of double hull width does not give much influence than other factors do. The exact use of material property such as failure strain is also important on the numerical simulation of collision.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.12
• /
• pp.2146-2152
• /
• 2008

In In this paper, we proposed a new JPEG2000 codec using multiresolution-based rendering (MRBR) technique for video compression of 3-dimensional digital cinema. We introduced discrete wavelet transform (DWT) for stereoscopic image and stereo matching technique in the wavelet domain. The disparity was extracted using stereo matching and transmitted with the reference (left) image. Since the generated right image was degraded by the occlusion lesion, the residual image which is generated from difference between the original right image and the generated one was transmitted at the same tine. The disparity data was extracted using the dynamic programming method in the disparity domain. There is high correlation between the higher and lower subbands. Therefore we decreased the calculation amount and enhanced accuracy by restricting the search window and applying the disparity information generated from higher subband.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.5
• /
• pp.1245-1252
• /
• 2013

As the usage of digital image contents increase, a security problem for the payed image data or the ones requiring confidentiality is raised. This paper propose a depth-map image contents encryption methodology to hide the depth information. This method is performed on the frequency coefficients in the Wavelet domain. This method, by selecting the level and threshold value for the wavelet transform, encryption at various strengths are possible. The experimental results showed that encrypting only 0.048% of the entire data was enough to hide the constants of the depth-map. The encryption algorithm expected to be used effectively on the researches on encryption and others for image processing.

• Journal of the Society of Naval Architects of Korea
• /
• v.37 no.1
• /
• pp.99-110
• /
• 2000

The damages due to wave impact loads are largely affected by impact pressure impulse and impact load area. The objective of this study is, as the third step, to perform dynamic structural analysis of bow flare structure of 300,000 DWT VLCC using LS/DYNA3D code, and to verify its dynamic structural behaviors. The impact load areas of stiffener space $1.5s{\times}1.5s$ and $2.5s{\times}2.5s$ are applied to bow flare structure part with relatively flexible stiffeners, and with stiff members such as stringers, webs etc., respectively, under the wave impact load with peak height 6.5MPa, tail 1.0MPa, and duration time 5.0msec. Through the dynamic structural analysis in this study, it might be thought that the structural strength of bow flare structure is generally sufficient for these wave impact load and areas, except that large damages were found at bow flare structure area with flexible wide span stiffeners.

• Journal of Internet Computing and Services
• /
• v.8 no.3
• /
• pp.33-43
• /
• 2007

In this proper, we proposes a robust watermarking against the lossy compression in the Hadamard domain. The Hadamard matrix consists of only 1 or -1 and can be computed veru fast. The Hadamrd transform has the inverse transform therefore it is able to be applied into the watermarking technology. In embedding process, we select 10 coefficients from intermediate frequency domain and create two watermark patterns. In extraction process, we use the watermark patterns and compare them to detect the watermark information. When we use the standard image ($512{\times}512$) and binary watermark image ($64{\times}64$), the results of these examines are PSNR for $38{\sim}42dB$ and BER for $3.9{\sim}12.5%$. The JPEG QF between 30 and100, naked human eyes can detect to watermark image easily. The experimental results show that performance of Hadamard domain is better than those of DCT, FFT, and DWT.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.7
• /
• pp.29-38
• /
• 2009

In this paper, a high performance pipelined computing design of parallel multiplier-temporal buffer-parallel accumulator is present for the convolution-based non-cascaded architecture aiming at the real time Discrete Wavelet Transform(DWT) processing. The convolved multiplication of DWT would be reduced upto 1/4 by utilizing the filter coefficients symmetry and the up/down sampling; and it could be dealt with 3-5 times faster computation by LUT-based DA multiplication of multiple filter coefficients parallelized for product terms with an image data. Further, the reutilization of computed product terms could be achieved by storing in the temporal buffer, which yields the saving of computation as well as dynamic power by 50%. The convolved product terms of image data and filter coefficients are realigned and stored in the temporal buffer for the accumulated addition. Then, the buffer management of parallel aligned storage is carried out for the high speed sequential retrieval of parallel accumulations. The convolved computation is pipelined with parallel multiplier-temporal buffer-parallel accumulation in which the parallelization of temporal buffer and accumulator is optimize, with respect to the performance of parallel DA multiplier, to improve the pipelining performance. The proposed architecture is back-end designed with 0.18um library, which verifies the 30fps throughput of SVGA(800$\times$600) images at 90MHz.

• Journal of the Society of Naval Architects of Korea
• /
• v.36 no.4
• /
• pp.87-94
• /
• 1999

Empirical design is still used to avoid a structural damage because impact phenomenon and structural behaviour due to wave impact load can not examined accurately. The damage due to wave impact load is largely affected by impact pressure impulse and impact load area. The objective of this study is, as the second step, to develop an efficient scantling program of bow flare structure, and to predict its impact load area by comparing maximum dented deformations at center of idealized panel structure model of bow flare structure of 300k DWT VLCC using LS/DYNA3D code, which will be used for its verification of dynamic structural analysis, as the next step. Through this study, the impact load area was estimated as $1.5s{\times}1.5s$ stiffener space(s) in the case of panel with stiffeners and as $2.5s{\times}2.5s$, with stringers, under impact pressure curve with peak height 6.5MPa, tail height 1.0MPa, and duration time 5.0msec.