• Journal of Sensor Science and Technology
• /
• v.7 no.6
• /
• pp.418-425
• /
• 1998

Stereo cameras are the most widely used sensing systems for automated machines including robots to interact with their three-dimensional(3D) working environments. The position of a target point in the 3D world coordinates can be measured by the use of stereo cameras and the camera calibration is an important preliminary step for the task. Existing camera calibration techniques can be classified into two large categories - linear and nonlinear techniques. While linear techniques are simple but somewhat inaccurate, the nonlinear ones require a modeling process to compensate for the lens distortion and a rather complicated procedure to solve the nonlinear equations. In this paper, a method employing a neural network for the calibration problem is described for tackling the problems arisen when existing techniques are applied and the results are reported. Particularly, it is shown experimentally that by utilizing the function approximation capability of multi-layer neural networks trained by the back-propagation(BP) algorithm to learn the error pattern of a linear technique, the measurement accuracy can be simply and efficiently increased.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.7
• /
• pp.169-179
• /
• 2014

In this paper, we propose a DOF (Depth of Field) correction technique by determining the values of the internal parameters of a 3-D camera which consists of stereoscopic cameras of different optical properties. If there is any difference in the size or the depth range of focused objects in the left and right stereoscopic images, it could cause visual fatigue to human viewers. The object size of in the stereoscopic image is corrected by the LUT of zoom lenses, and the forward and backward DOF are corrected by the object distance. Then the F-numbers are determined to adjust the optical properties of the camera for DOF correction. By applying the proposed technique to a main-sub type 3-D camera using a GUI-based DOF simulator, the DOF of the camera is automatically corrected.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.9
• /
• pp.28-34
• /
• 2014

A claw pole stepping motor is widely used in various fields such as a compact optical disk drive, computer peripherals, digital cameras, office automation(OA), handheld mobile devices, because it has the suitable structure for compact motor. However 3D analysis is essential for design of Claw pole stepping motor because of axial flux path. Thus, in general, it takes a lot of time in the design of Claw pole motor. In this paper, magnetic equivalent circuit considering axial flux was proposed to reduce design time of Claw pole motor and we has designed by using the magnetic equivalent circuit. In addition, in oder to verify the study, design model was verified by 3D FEM simulation and experiment.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.153.2-153
• /
• 2001

A technique is described for producing a virtual object with realistic motion. A 3-D human motion model is obtained by applying a developed motion capturing technique to a real human in motion. Factorization method is a technique for recovering 3-D shape of a rigid object from a single video image stream without using camera parameters. The technique is extended for recovering 3-D human motions. The proposed system is composed of three fixed cameras which take video images of a human motion. Three obtained image sequences are analyzed to yield measurement matrices at individual sampling times, and they are merged into a single measurement matrix to which the factorization is applied and the 3-D human motion is recovered ...

• Journal of Sensor Science and Technology
• /
• v.21 no.2
• /
• pp.96-102
• /
• 2012

This paper addresses photometric distortion problems of a compact 3D scanning sensor which is composed of a micro-size and inexpensive camera-projector system. Recently, many micro-size cameras and projectors are available. However, erroneous 3D scanning results may arise due to the poor and nonlinear photometric properties of the sensors. This paper solves two inherent photometric distortions of the sensors. First, the response functions of both the camera and projector are derived from the least squares solutions of passive and active calibration, respectively. Second, vignetting correction of the vision camera is done by using a conventional method, however the projector vignetting is corrected by using the planar homography between the image planes of the projector and camera, respectively. Experimental results show that the proposed technique enhances the linear properties of the phase patterns that are generated by the sensor.

• The Journal of Korea Robotics Society
• /
• v.11 no.4
• /
• pp.300-309
• /
• 2016

This paper proposes a method for motion estimation of consecutive cameras using 3-D straight lines. The motion estimation algorithm uses two non-parallel 3-D line correspondences to quickly establish an initial guess for the relative pose of adjacent frames, which requires less correspondences than that of current approaches requiring three correspondences when using 3-D points or 3-D planes. The estimated motion is further refined by a nonlinear optimization technique with inlier correspondences for higher accuracy. Since there is no dominant line representation in 3-D space, we simulate two line representations, which can be thought as mainly adopted methods in the field, and verify one as the best choice from the simulation results. We also propose a simple but effective 3-D line fitting algorithm considering the fact that the variance arises in the projective directions thus can be reduced to 2-D fitting problem. We provide experimental results of the proposed motion estimation system comparing with state-of-the-art algorithms using an open benchmark dataset.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.396-399
• /
• 2002

A roughing process is the one of most important shoe manufacturing processes. Especially, it is indispensable to manufacture the leather shoes such as dress shoes, safety shoes, golf shoes, etc. The roughing process relies greatly on the operator's skill and experience. Therefore, the automation of roughing process is necessary to establish the improvement of productivity. We are trying to develop the Automatic Roughing Machine controlled by NC. As pre-study to do this, we need to measure the roughing path for NC, because there is no study on this pan and no reference about this. In this study, we proposed the 3-Dimensional Scanner System to measure the roughing path with new concept. The developed 3-D scanner System generates the roughing path using the 3 images obtained from 3 CCD cameras. The experimental results show that the proposed system can measure accurately the roughing path.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.4A
• /
• pp.239-249
• /
• 2012

Recently, the virtual view generation method using depth data is employed to support the advanced stereoscopic and auto-stereoscopic displays. Although depth data is invisible to user at 3D video rendering, its accuracy is very important since it determines the quality of generated virtual view image. Many works are related to such depth enhancement exploiting a time-of-flight (TOF) camera. In this paper, we propose a fast 3D scene capturing system using one TOF camera at center and two high-resolution cameras at both sides. Since we need two depth data for both color cameras, we obtain two views' depth data from the center using the 3D warping technique. Holes in warped depth maps are filled by referring to the surrounded background depth values. In order to reduce mismatches of object boundaries between the depth and color images, we used the joint bilateral filter on the warped depth data. Finally, using two color images and depth maps, we generated 10 additional intermediate images. To realize fast capturing system, we implemented the proposed system using multi-threading technique. Experimental results show that the proposed capturing system captured two viewpoints' color and depth videos in real-time and generated 10 additional views at 7 fps.

• Journal of Institute of Control, Robotics and Systems
• /
• v.3 no.4
• /
• pp.406-414
• /
• 1997

A real-time inspection system is developed using line scan cameras. Several improved algorithms are proposed for real-time detection of defects in this automated inspection system. The major improved algorithms include the preprocessing, the threshold decision, and the clustering algorithms. The preprocessing algorithms are for exact binarization and the threshold decision algorithm is for fast detection of defects in 1-D binary images. The clustering algorithm is also developed for fast classifying of the defects. The system is applied to PCBs(Printed Circuit Boards) inspection. The typical defects in PCBs are pits, dent, wrinkle, scratch, and black spots. The results show that most defects are detected and classified successfully.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2009.01a
• /
• pp.193-198
• /
• 2009

Generally a TV broadcast video of ball sports is composed from those of multiple cameras strategically mounted around a stadium under the supervision of a master director. The director decides which camera the current view should be from and how the camera work should be. In this paper, such a decision rule is based on the 3D location of ball which is the result of multi-view tracking. While current TV sports broadcast are accompanied with professional cameramen and expensive equipments, our system requires few video cameras and no cameraman. The resulted videos were stable and informative enough to convey the flow of a match.