• 제목/요약/키워드: 3D CG

검색결과 194건 처리시간 0.03초

GC/MS에 의한 한국인의 모발중 Methamphetamine검출 (Determination of methamphetamine in the hair of Korean abuser by CG/MS)

  • 유영찬;정희선;최화경
    • 약학회지
    • /
    • 제37권4호
    • /
    • pp.356-361
    • /
    • 1993
  • A sensitive method for the determination of methamphetamine(MA) and amphetamine(AM) in hair was developed by gas chromatography/mass spectrometry using stable isotope-labeled internal standards, amphetamine-d$_{5}$ and methamphetamine-d$_{5}$. Hair sample was washed with MeOH, incubated with MeOH(I% HCI) overnight at $37^{\circ}C$ while stirring and extracted using solid phase extraction column on a vacuum manifold. The extract obtained was pentafluoropropionated, and applied to GC/MS. The calibration curves of MA and AM were linear from 2.5 to 250 ng (r>0.99 for both). The limit of detection was 0.1 ng/mg in hair and cut-off level was set at 0.25 ng/mg for both. Hair samples of 27 MA abusers showed positive results in the range 0.7 to 106.8 ng/mg. AM, its metabolite, was detected in 20 out of 27 samples. The ratio of MA versus AM was 4.6~38.3 in specimens. Hair analysis for methamphetamine by GC/MS is an effective method for identifying long-term drug abusers.

  • PDF

인공발정유도견의 발정기 변화와 생식기의 변화 (Changes of estrus signs and genital organs by hormomal induction of estrus in the bitch)

  • 유일정;김용준
    • 대한수의학회지
    • /
    • 제36권3호
    • /
    • pp.719-729
    • /
    • 1996
  • To investigate changes of estrus signs and genital organs in the bitch by hormonal induction of estrus, fourteen bitches of nulliparous and multiparous(2nd-5th) were grouped into diestrus and anestrus according to their estrus cycle. The hormonal treatments were divided into four groups: group A($PGF_2{\alpha}+PMSG+hCG$) and group B(PMSG+hCG) in diestrus bitches and group C(GnRH+FSH+hCG) and group D(PMSG+hCG) in anestrus bitches. The external signs of proestrus and estrus as well as the vaginal smear findings and natural breeding as estrus detection were investigated in all the experimental groups. Also, genital organs were examined at two months after the hormone treatment. The bitches in anestrus showed 100% of male attraction, vaginal bleeding and vulvar swelling as proestrus signs after the hormonal treatment for estrus induction and they showed higher numerical value of signs than the bitches in diestrus. The group A showed the lowest value in proestrous signs of all the groups. The bitches in anestrus treated with GnRH+FSH showed 100% of positive estrus by vaginal smear findings and 75% of natural breeding as estrus detection index and these values were the highest of all the groups. Pregnancy was recognized in only group C and the conception rate was 7.14% in al the experimental animals. Of the side effects after the hormone treatment, external findings of continous male attraction, continous external swelling and purulent exudate were recognized in all the experimental groups and the bitches in diestrus showed higher value of the findings than the bitches in anestrus. Of the changes of genital organs after the hormone treatment, hypertrophy of uterine horn, sanguineous exudate and purulent exudate as uterine findings were recognized in all the groups and these findings were shown more in the bitches in diestrus than in those in anestrus. These results indicated that group C showed the highest value of all the experimental groups in external signs of estrus and estrus detection and also pregnancy was recognized only in that group, consequently, that the hormonal treatment of group C would be the most effective for estrus induction, and also indicated that bitches in anestrus were more suitable than bitches in diestrus for the induction of estrus. In addition, side effects in external genital organs and uteri after hormone treatment were shown more in the bitches in diestrus than in those in anestrus, indicating that bitches in anestrus would be of choice for estrus induction.

  • PDF

섬유소 분해효소 유전자가 도입된 형질전환 돼지 생산 (Production of Transgenic Pig Harboring the Cellulase Digest Gene(CelD))

  • 박진기;이연근;민관식;이창현;이향흔;김광식;장원경;김진회;이훈택
    • 한국가축번식학회지
    • /
    • 제26권2호
    • /
    • pp.87-94
    • /
    • 2002
  • 본 연구는 섬유소분해효소 유전자(CelD)가 도입된 형질전환 돼지를 생산하기 위해 사계절동안 수행하였다. 약 8∼15개월령의 순종의 랜드레이스경산돈 및 미경산돈 126두는 유전자 미세주입을 위한 1세포기 단계의 수정란 채란 및 이식을 위해 사용하였으며, 발정동기화 및 과배란 방법은 PG600 주입 후 9일간 매일 20mg의 altrenogest를 사료에 첨가하여 급여하였다. Altrenogest를 9일간 급여 후 1000IU의 PMSG와 750IU의 hCG를 주입하므로서 과배란을 유도하였다. 미세주입을 위한 유전자는 Rat elasterase promoter에 CelD유전자를 연결하여 준비하였으며, 호르몬 처리후 91두의 공란돈으로부터 1,422개의 난자를 회수하였으며 이중 95.6% (1,359/1,422)는 DNA미세주입을 위해 전핵을 관찰 할 수 있는 1세포기의 수정란이었다. 이중 유전자가 미세주입된 725개의 난자를 35두의 수란돈에 이식하였으며 13두의 임신돈으로부터 65두의 자돈을 생산하였다. 한편 수란돈당 수정란 이식수가 임신율에 미치는 영향을 조사한 결과 약 21∼24개의 수정란을 이식한 구에서 임신율이 50%로 타구의 20.0%(20개 이하)와 33.3%(25개 이상)보다 높았으며, 꼬리조직으로부터 분리된 DNA의 PCR검정결과 65두중 5두가 형질전환 양성 반응을 나타내어 7.69%의 형질전환율을 나타내었다 따라서 본 연구는 생체반응기를 통한 형질전환 돼지생산을 위한 유용한 정보를 제공하게 될 것이다.

스테레오 3D 영상 스케일링에 대한 기하학적 분석 및 anti-aliasing 필터 (Geometric analysis and anti-aliasing filter for stereoscopic 3D image scaling)

  • 김욱중;허남호;김진웅
    • 방송공학회논문지
    • /
    • 제14권5호
    • /
    • pp.638-649
    • /
    • 2009
  • 최근 들어 다양한 스테레오 3D 디스플레이 장치의 출시가 활발히 이루어지면서 임의의 스테레오 3D 영상에 대한 효과적인 크기 변환 방법, 즉 스케일링(scaling) 방법에 대한 요구가 증가되고 있다. 그런데 CG 등을 통하여 생성된 경우와 같이 장면의 기하학적 정보를 완벽히 파악할 수 있는 경우를 제외하고는, 정확한 스테레오 3D 영상의 스케일링은 현실적으로 불가능하다. 이러한 제한으로 가장 널리 이용되는 방법은 좌우 영상에 대하여 적절한 2D 스케일링을 수행하고, 그 결과로 적절한 스테레오 3D 영상스케일링이 발생하기를 기대하는 것이다. 본 논문에서는 2D 영상 스케일링을 통한 스테레오 3D 영상 스케일링에 있어서, 양안시(binocular vision) 모델에 근거한 기하학적 분석과 주파수 변화 분석을 제시한다. 기하학적 분석을 통해서는 스테레오 3D 영상에서 발생 가능한 왜곡들에 대해서 설명하고, 주파수 변화 분석을 통해서는 디지털 신호의 스케일링에 필수적으로 요구되는 aliasing 왜곡 방지 방법에 대해서도 제안한다. 제안된 방법은 주관적 화질 평가 결과 샘플링 이론 (sampling theory)에만 근거한 필터링 방식에 비해 화질 왜곡을 더욱 효과적으로 억제할 수 있다는 것을 파악할 수 있었다. 따라서, 제안된 방법은 다양한 해상도를 지니는 3D 디스플레이 장치에서의 스테레오 3D 영상 재생에 효과적으로 이용될 것으로 기대된다.

마우스 수정란의 체외발달에 미치는 소와 돼지의 난관상피세포와의 공배양 효과 (Effect of Co-culture with Bovine and Porcine Oviductal Epithelial Cells on In Vitro Development of Mouse Embryos)

  • 이성;허의종;석호봉
    • 한국가축번식학회지
    • /
    • 제21권2호
    • /
    • pp.139-146
    • /
    • 1997
  • 소와 돼지의 난관 상피세포가 마우스 초기배의 발달 에 미치는 영향과 체외배양에 있어 최적의 배양조건을 알아보기 위하여 ICR 계통의 마우스에 PMSG 7.5 IU와 hCG 7.5 IU를 각각 복강주사하고 자연교미하여 48시간 경과 후에 난관에서 2-세포 초기배를 D-PBS로 관류하여 회수하였다. 회수된 배아는 소와 돼지의 난관 상피세포와 공배양하여 그 효사를 배반포 발달율과 핵의 수를 조사하였다. 또한 생체내와 실험 관내의 발육상태를 비교하기 위하여 hCG접종후 120 시간동안 생체내에서 발육시킨 신선 배반포배를 자궁 에서 채취하여 그 핵수를 계산하였다. 마우스 초기배는 TCM 199, Ham's F-10, Medicult IVF 배양액에서 소 난관 상피세포 또는 돼지 난관 상피세포와 공배양할 경우 91-97%의 높은 배반포 발달율을 보였으며 난관 상피세포간의 차이는 나타 나지 않았다. 각 배양조건에 따라 배양된 배반포의 핵수는 체내에서 자란 배반포에 비해 체외에서 배양한 배반포에서 유의적으로 적었다. 체외배양중 핵수는 공배양하지 않은 TCM 199, Ham's F-10, Medicult IVF medium 에서 각각 68.1${\pm}$6.00, 67.3${\pm}$4.49, 66.4${\pm}$5.64개로 나타났으며 BOEC와 공배양하였을 경우에는 94.3${\pm}$8.61, 92.5${\pm}$7.60, 92.1${\pm}$6.107B, POEC와 공배양하였을 때는 93.3${\pm}$5.80, 92.9${\pm}$6.53, 92.3${\pm}$7.35개로 체내에서 배양된 배반포의 경우의 107.2${\pm}$7.43개보다 적었다. 이상의 결과로 난관 상피세포인 BOEC와 POEC는 마우스 초기배야와의 체외공배양시 배아의 발달과 분화에 이로운 영향을 주어 발달율과 부화율를 향상시키나 핵수 증가에서는 체내조건보다 미홉한 것으로 사료된다.

  • PDF

핵심 구성 요소를 활용한 게임 트레일러 제작에 대한연구 - 게임 트레일러 '타나토스' 제작 사례를 중심으로 - (A study of utilizing key components in game trailer production - Focusing on production case of trailer "Thanatos" -)

  • 강해도;윤태수;이병춘;이정기
    • 예술인문사회 융합 멀티미디어 논문지
    • /
    • 제6권3호
    • /
    • pp.19-31
    • /
    • 2016
  • 게임 트레일러는 게임의 홍보를 하는 주된 마케팅 역할을 하고 있다. 최근 3D게임 트레일러의 스토리텔링, 그래픽 기법, 제작 기술, 게임 메카닉스 등으로 그 특징을 요약해 볼 수 있다. 온라인게임 <월드 오브 워크래프트: 판다리아의 안개>는 초반의 시네마틱 트레일러로 제작되었으나 최근에는 유저들에게 직관적인 인 게임 트레일러를 머시니마 제작기법으로 제작되고 있다. 이 방식은 게임에 관한 기능과 다양한 콘텐츠, 그래픽들을 트레일러를 통해 공개함으로서 유저들에게 게임에 관한 호기심과 정보를 주는 데에 유용하다. 머시니마는 3차원 CG등 첨단 기법에 의해 배우와 배경이 사이버 상으로 단기간 내에 형성되고 성우 더빙 등만 거치면 되므로 상대적으로 제작비 및 제작 기간이 적게 들 뿐만 아니라 멀티 스토리를 가질 수 있는 장점이 있다. 이를 토대로 게임 트레일러 타나토스는 머시니마 제작기법으로 개발되는 영상입니다. 본 논문은 실제 제작단계에서 사용되는 위 4가지 측면을 직관적으로 적용하고 분석함으로써 전체 프로젝트의 제작과정 및 핵심 구성요소의 중요성을 제안하고자 한다.

반복 가산 기법을 이용한 Fresnel 홀로그램의 고속 계산 알고리듬 (Fast Computation Algorithm of Fresnel Holograms Using Recursive Addition Method)

  • 최현준;서영호;김동욱
    • 한국통신학회논문지
    • /
    • 제33권5C호
    • /
    • pp.386-394
    • /
    • 2008
  • 디지털 홀로그래픽 비디오 시스템을 제작하기 위해서는 디지털 홀로그램을 가능한 빠르게 생성하는 것이 중요하다. 본 논문에서는 디지털 홀로그램의 전체 좌표를 대상으로 반복적인 가산 연산을 이용하여 Fresnel 홀로그램의 생성 속도를 높이는 알고리듬을 제안한다. 디지털 홀로그램을 계산하기 위한 3차원 객체는 컴퓨터 그래픽(computer graphic, CG)으로 제작한 깊이영상(depth-map image)을 이용하였다. 본 논문에서 제안하는 알고리듬은 부동소수점 형식의 반복가산기법을 이용하여 디지털 홀로그램의 위상을 고속으로 계산하는 기법이다. 실험결과 제안한 알고리듬은 일반적인 CGH 수식을 이용한 기법의 70%, [3]에서 제안한 기법보다 30%이상 연산속도가 빨라졌다.

Breeding of New Productive Bivoltine Hybrid, CSR12 $\times$ CSR6 of Silkworm Bombyx mori L.

  • Datta, R.K.;Basavaraja, H.K.;Reddy, N.Mal;Kumar, S.Nirmal;Kumar, N.Suresh;Babu, M.Ramesh;Ahsan, M.M.;Jayaswal, K.P.
    • International Journal of Industrial Entomology and Biomaterials
    • /
    • 제3권2호
    • /
    • pp.127-133
    • /
    • 2001
  • With an objective of evolving quantitatively and qualitatively superior bivoltine breeds/hybrids of silkworm Bombyx mori L. for tropical conditions, breeding work was initiated in Central Sericultural Research and Training Institute, Mysore during 1992 by utilizing two Japanese hybrids namely BNl8$\times$BCS25 and Shunrei$\times$Shogetsu along with Indian evolved breed, KA. The breed CSR12 which is characterized with sex-limited larval marking and white oval cocoons was evolved from the Japanese hybrid BNl8 ${\times}$ BCS25 by crossing with KA, while the breed CSR6 which is characterized with normal marking (marked larvae) and white dumbbell cocoons was extracted from the Japanese commercial hybrid Shunrei${\times}$Shogetsu through continuous inbreeding coupled with selection. After fixation, these breeds along with other newly evolved breeds were subjected to hybrid study under optimum environmental conditions in the laboratory for expression of full potential of the genotypes. These hybrids were evaluated by Multiple Trait Evaluation Index (Mano et al., 1993). The hybrid CSR12${\times}$CSR6 was selected based multiple trait evaluation index value. The hybrid CSR12$\times$CSR6 recorded survival of 96.0%, shell weight of 50.0 cg, shell ratio of 24.3%, raw silk percentage of 19.6, filament length of 1,216 m, boil off loss of 22.4% and renditta of 5.1. On the other hand, the control hybrid (KA ${\times}$ NB4D2) has recorded survival of 90.6%, shell weight of 42.1 cg, shell ratio of 20.4%, raw silk percentage of 15.9, filament length of 999 m, boil off loss of 24.8% and renditta of 6.3. The hybrid CSR12$\times$CSR6 was authorized during 1997 by Central Silk Board, Government of India for commercial exploitation during favourable months based on national level race authorization test.

  • PDF

2.4 GHz WLL 단말기용 GaAs MESFET MMIC 송신기 설계 및 제작 (Design and Fabrication of a GaAs MESFET MMIC Transmitter for 2.4 GHz Wireless Local Loop Handset)

  • 성진봉;홍성용;김민건;김해천;임종원;이재진
    • 한국전자파학회논문지
    • /
    • 제11권1호
    • /
    • pp.84-92
    • /
    • 2000
  • 2.4 GHz 대역 WLL 단말기용 GaAs MESFET MMIC 송신기를 설계하고 제작하였다. 설계된 송신기는 이중 평형 능동형 혼합기와 전압 부궤환 구조를 갖는 2단 구동증폭기로 구성하였다. 특히, 한 쌍의 소스 접지-게이트 접지(Common-Source. Common -Gate: CSCG) 구조를 사용하여 IF 입력 선호의 비대칭성으로 인한 동작영역 감소를 보상하였다. 또한 MESFET의 단자간 위상 특성을 이용하여 국부 발진기(La) 신호의 누설 전력을 억제 하였다. 제작된 칩의 크기는 $0.75\times1.75 mm^2$이었고 측정 결과 2.7 V. 55.2 mA에서 386 dB의 변환이득. 11.6 dBm 의 출력$P_{idB}$ 구동증폭기의 RF 출력 -5dBm에서 - 31.5 dBc의 IMD3의 특성을 얻었다. 따라서 제작된 송신기는 WLL 단말기에 적용 가능하다.

  • PDF

VFX 영화 제작을 위한 3D animatied Pre-visualization(3D애니메이티드 사전시각화)의 역할에 관한 연구 (The Study on the Role of 3D Animated Pre-visualization in VFX FilmProduction)

  • 박성호
    • 만화애니메이션 연구
    • /
    • 통권51호
    • /
    • pp.293-319
    • /
    • 2018
  • 최근의 영화, 애니메이션, 드라마같은 영상 콘텐츠들은 기술과 장비의 발전에 힘입어 표현할 수 있는 영화적 상상의 영역을 빠른 속도로 넓혀가고 있다. 높아진 관객의 시각적 기대를 충족시키고 흥미진진한 스토리텔링과 환상적 세계를 구현하기 위해 서로 다른 기법간의 융합도 활발히 사용되어 지고 시각효과 및 영상 합성에 대한 리얼리티도 더욱 증대되고 있는 중이다. 그에 따라 최근의 컴퓨터그래픽스를 사용한 VFX중심의 영화들은 과거보다 더욱 복잡한 제작 프로세스를 가진다. 때문에 정교한 설계를 위해 기획 과정에서 '프리비즈'로 불리는 프리-비주얼라이제이션(Pre-visualization)의 중요성이 더욱 크게 대두되고 있다. 프리비즈는 영화나 애니메이션의 본 제작에 들어가기 전 기획단계에서 스토리나 연출아이디어에 대한 사전 시각화작업을 뜻한다. 오늘날 프리비즈는 컴퓨터그래픽스를 사용하여 3D애니메이션의 유형으로 구현이 되며 이러한 프리비즈를 3D animatied Pre-visualization이라고 한다. 추상적이고 모호한 감독의 생각들을 미리 3차원 환경에서 구체적으로 구현해 볼 수 있는 3D animatied Pre-visualization은 비주얼 스토리텔링의 막강한 수단으로써 현재 컴퓨터 그래픽을 광범위하게 사용하는 VFX 영화산업을 중심으로 활발히 사용되고 있고 프로덕션의 전반에 걸친 프리비즈의 역할도 과거에 비해 증대되었다. 그러나 그에 따른 프리비즈의 역할과 효용성에 관한 연구는 많지 않은 상태다. 이에 본 연구는 연구자가 제작에 참여한 3D animatied Pre-visualization의 제작사례를 중심으로 현재 VFX 영화 제작 시 활용되고 있는 프리비즈의 역할에 관해 연구를 진행하였다. 오늘날 세분화된 프리비즈의 역할을 스토리-비즈, 테크-비즈, 컨셉-비즈, 피칭-비즈, 포스트-비즈, 3D애니메틱스로 분류하고 각각의 역할에 관해 사례이미지와 함께 분석하였다. 이러한 역할에 관한 연구를 통해 프리비즈가 갖추어야하는 특성을 명확히 하였고 프로덕션에서 프리비즈의 활용이 불러오는 이점과 효용성에 관한 개념을 강화하였다. 본 연구는 국내 VFX영화 제작과정에서 프리비즈의 다양한 역할과 그에 따른 효용성에 대해 공감하여 프로덕션 전반에 걸친 활발한 사용을 유도하는 것에 의의가 있다.